A certain commercial mass spectrometer is used to separate uranium ions of mass 3.92 x 1025 kg and charge 3.20 x 10-19 C from related species. The ions are accelerated through a potential difference of 139 kV and then pass into a uniform magnetic field, where they are bent in a path of radius 1.36 m. After traveling through 180° and passing through a slit of width 0.757 mm and height 1.35 cm, they are collected ina cup. (a) What is the magnitude of the (perpendicular) magnetic field in the separator? If the machine is used to separate out 1.37 mg of material per hour, calculate (b) the current of the desired ions in the machine and (c) the thermal energy produced in the cup in 0.882 h. Detector (a) Number Units (b) Number Units (c) Number i Units !!!

A certain commercial mass spectrometer is used to separate uranium ions of mass 3.92 x 1025 kg and charge 3.20 x 10-19 C from related species. The ions are accelerated through a potential difference of 139 kV and then pass into a uniform magnetic field, where they are bent in a path of radius 1.36 m. After traveling through 180° and passing through a slit of width 0.757 mm and height 1.35 cm, they are collected ina cup. (a) What is the magnitude of the (perpendicular) magnetic field in the separator? If the machine is used to separate out 1.37 mg of material per hour, calculate (b) the current of the desired ions in the machine and (c) the thermal energy produced in the cup in 0.882 h. Detector (a) Number Units (b) Number Units (c) Number i Units !!!

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Physics In the figure a uniform electric field is directed out of the page within a circular region of radius R = 4.00 cm. The magnitude of the electric field is given by E = (3.50 × 10-3 V/m•s)t, where t is in seconds. What is the magnitude of the magnetic field that is induced at radial distances (a)3.00 cm and (b)5.50 cm?
An electric field with initial magnitude 130 V/m directed into the page and increasing at a rate of 13.0 V/(m · s) is confined to the area of radius R = 15.0 cm in the figure below. If r = 46.0 cm, what are the magnitude and direction of the magnetic field at point A?
A mass spectrometer is used to separate the uranium isotopes 235U and 238U. (a) What is the ratio of the radii of their circular paths? (b) In this spectrometer, singly ionized uranium ions pass first through a 180-m/s velocity selector, then into a 2.75-T magnetic field. Find the diameters of the arcs traced out by the two isotopes.
Problem 5. As a parallel-plate capacitor with circular plates 20 cm in diameter is being charged, the displacement current density in the region between the plates is uniform and has a magnitude of 20 A/m². (µ₁ = 4×10−7 T·m/A, and &o = 8.85x10-¹2 C²/N·m²). (a) Calculate the magnitude B of the magnetic field at a distance r = 50 mm from the axis of symmetry of this region. (b) Calculate dE/dt in this region.
A velocity selector consists of an electric field in the z direction and a magnetic field in the y-direction, with B = 12.0 mT. Find the value of E, in kV/m, such that a 800-eV electron moving in the negative x direction is undeflected.
A certain commercial mass spectrometer is used to separate uranium ions of mass 3.92 × 10-25 kg and charge 3.20 × 10-¹⁹ C from related species. The ions are accelerated through a potential difference of 122 kV and then pass into a uniform magnetic field, where they are bent in a path of radius 1.03 m. After traveling through 180° and passing through a slit of width 0.923 mm and height 1.19 cm, they are collected in a cup. (a) What is the magnitude of the (perpendicular) magnetic field in the separator? If the machine is used to separate out 1.17 mg of material per hour, calculate (b) the current of the desired ions in the machine and (c) the thermal energy produced in the cup in 1.15 h. (a) Number i (b) Number (c) Number MO i Units Units Units -Detector
can you please ans (a) (b) (c)?
In the figure, an electron accelerated from rest through potential difference V1=1.26 kV enters the gap between two parallel plates having separation d = 19.6 mm and potential difference V2= 52.4 V. The lower plate is at the lower potential. Neglect fringing and assume that the electron's velocity vector is perpendicular to the electric field vector between the plates. In unit-vector notation, what uniform magnetic field allows the electron to travel in a straight line in the gap? I need this in units of mT.
In the figure, an electron accelerated from rest through potential difference V1-1.26 kV enters the gap between two parallel plates having separation d = 19.6 mm and potential difference V2- 52.4 V. The lower plate is at the lower potential. Neglect fringing and assume that the electron's velocity vector is perpendicular to the electric field vector between the plates. In unit-vector notation, what uniform magnetic field allows the electron to travel in a straight line in the gap? Number ( o ĵ+ i R) Units mT 124.7
Determine the mobility in (m²/V.s) for a sample of (0.1m ×0.01m ×0.001m). If Ix= 1mA, V=12V, Magnetic field= 0.05tesla, and Hall voltage= 6.25mV.
In the figure, an electron accelerated from rest through potential difference V₁-0.910 kV enters the gap between two parallel plates having separation d = 27.9 mm and potential difference V2 63.0 V. The lower plate is at the lower potential. Neglect fringing and assume that the electron's velocity vector is perpendicular to the electric field vector between the plates. In unit-vector notation, what uniform magnetic field allows the electron to travel in a straight line in the gap? Number (i i+ i + k) Units
In the figure, an electron accelerated from rest through potential difference V₁-0.910 kV enters the gap between two parallel plates having separation d = 27.9 mm and potential difference V2 63.0 V. The lower plate is at the lower potential. Neglect fringing and assume that the electron's velocity vector is perpendicular to the electric field vector between the plates. In unit-vector notation, what uniform magnetic field allows the electron to travel in a straight line in the gap? Number (i i+ i + k) Units