A cable technician is troubleshooting a home network connectivity issue. Given the following abbreviated trace route output:- 1 192.168.1.1 -2 172.16.40.1 - 3 10.4.0.1 - 4 172.16.40.1Which of the following is MOST likely occurring? O Switching loop O Broadcast storm O IP conflict

Q: Scenario There is design1.csv file attached to this  router interfaces ip_on_interfaces R1 s1, fa1…

A: Here is the solution:-

Q: An organization is to divide the network 192.168.1.0/24 into six subnets. The largest division has…

A: Dear Student, One of the major problem with constant length subnet mask is that a lot of the ip…

Q: Assume that routing works in the diagram shown below. PC1 sends an ICMP ECHO request to PC2. Which…

A: For sending data packets from one system to another system, intermediate routers are used. These…

Q: 4. Study the following output taken on R1: RIsping 10.5.5.5S source 10.1.1.1 Type ape sequence so…

A: Given: R1#ping 10.5.5.55 source 10.1.1.1 Type escape sequence to abort. Sending 5,100-byte ICMP…

Q: A network 100.100.8.0/25SS. 2SS. 255. O is dNickel into 5 network using routers as shown in the…

A: Step 1: To support the following number of hosts, the network 100.100.8.0/24 must be subnetted into…

Q: Instructions for all problems: Use the Subnetting Worksheet to show and record all work for each…

A: Actually, IP address is 142.20.33.17 Major network mask  255.255.0.0

Q: As the network administrator for a growing ISP, you want to make efficient use of your network…

A: ANSWER:-

Q: Configure Static Routing Using Cisco Packet Tracer.

A: Routing is the process of selecting a path for delivering data to its intended location. A routing…

Q: 56.122.22.3/24 10.0.0.4/24 56.122.22.3 10.0.0.1 O 10.0.0.2 Internet 127.0.0.1 Router A 10.0.0.1/24…

A: The above question that is in above diagram Router A is configured with NAT which of the following…

Q: Windows IP Configuration Ethernet adapter El90x1:

A: 1) Joe is trying to obtain his own internet configuration details Here, the Ethernet adapter…

Q: Subinterface G0/1.10 on R1 must be configured as the default gateway for the VLAN 10 192.168.10.0/24…

A: To route between VLANs, the R1 GigabitEthernet 0/0/1 interface is logically divided into three…

Q: You've been given the 195.25.123.0 network. You need 4 networks. Calculate the correct subnet mask,…

A: 195.25.123.0 This address belongs to class C where number of network bits is 24 and number of host…

Q: You are given the IP routing table below. 0.0.0.0/0 (default gateway) 192.160.0.0/13 192.168.0.0/16…

A: Given table contains five IP subnets and each contains one outgoing interface. For given destination…

Q: Which of the following method is not used to tackle IPV4 address space limitations? Choose one a.…

A: I have answered both the parts and have provided necessary explanation with it.

Network Protocols

A network protocol is a set of rules that govern how data is exchanged between the devices in a network. Network protocols enable communication between devices that are located in different parts of the world. Consequently, they are critical in today's digital communications.