A bioengineer working at chemical company intends to dry an insoluble wet granular material in a pan 0.6 x 0.6 m and 3 cm deep. The material is at the same dept in the pan, whereas the sides and the bottom can be considered to be insulated. Heat transfer is by convection from an air stream flowing parallel to the surface at a velocity of 10 m/s. The air is at 65.6°C and has a humidity of 0.010 kg H2O/kg dry air. Calculate the rate of drying for constant-rate period

A bioengineer working at chemical company intends to dry an insoluble wet granular material in a pan 0.6 x 0.6 m and 3 cm deep. The material is at the same dept in the pan, whereas the sides and the bottom can be considered to be insulated. Heat transfer is by convection from an air stream flowing parallel to the surface at a velocity of 10 m/s. The air is at 65.6°C and has a humidity of 0.010 kg H2O/kg dry air. Calculate the rate of drying for constant-rate period

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A square array of 2 cm diameter pipes consists of 64 pipes, each 80 cm long. The pipe surface temperature is 97 °C and is exposed to water vapor at 1 atm.Calculate the amount of condensed water in kg/hour
Is induced draft cooling tower a type of evaporative cooling tower? Subject : Heat Transfer
Illustrating the relationships between system constants for the chosenperfect gas system(refrigeration systems). Discuss the relevance of the ideal gas law constants and explain how changes in one variable affectthe others under the condition of a perfect gas. Include molar mass, gas constant, and specific heatcapacities of gases, including the associated equations.
What is smog? What does it consist of?
An auditorium to be air-conditioned for the following conditions, Outdoor dry-bulb temperature 40 °C Outdoor wet-bulb temperature 20°C Expected comfort condition 20 DBT 60%RH Seating capacity of the auditorium 1500 persons Air supplied from outdoor 0.3 m¥min per person fthe required condition is achieved first by adiabatic humidification and then by cooling, determine () the capacity of the cooling coil in tonnes and (i) the capacity of humidifier in kg/h.
Determine the air properties using the psychrometric chart (show solution manually) . Plot the given air properties in the chart make appropriate projections to determine the other air properties. Twb = 25°C , Tdp = 25°C
Water vapor is evaporated into the air at T = 25°C and P = 1 atm in a 10m x 100m water pool The distance between the surface of water and air outside of the container is 20 cm (Z2 - Z₁ 20cm) the humidity at Z₁ is XA1 = 2% and that at Z2 is XA2 = 1.9%. The diffusivity of water vapor to air at T = 25°C is DAB 0.282 cm²/s. Universal gas constant R = 0.00008205 .m³atm mol.K = NE Estimate the rate of water vapor (kg/day) evaporated at the surface of the water at z = Z1 |z2 Molar mass of water M = z1 18 g/mol
An air conditioning system, shown schematically below, supplies air at the rate of 4 kg/s to a space maintained at a db-temperature of 27°C and relative humidity of 50%. The sensible and latent heat loads on the space are 46 kW and 20 kW respectively. Outdoor air at 35°C db-temperature and 24°C wb-temperature is introduced at the rate of 1.1 kg/s. The relative humidity of the air leaving the cooling coil is 90%. The pressure is constant at 101.3 kPa. Determine:the supply air temperature in °Cthe supply air relative humidity in %the mass flow rate of the air that bypasses the cooling coil in kg/sthe refrigeration capacity of the cooling coil in kW
Calculate the temperature in an unheated space (Tunc) adjacent to a conditioned room with three (3) common surface areas of 175-ft2, 190-ft2, and 210-ft² with an overall heat transfer coefficient of 0.21, 0.27, and 0.32 Btu/h-Ft2 °F, respectively. The surface areas of the unheated space exposed to the outdoors are 175-ft² and 210-ft² with corresponding overall heat transfer coefficients of 0.21 and 0.40 Btu/h- Ft².°F. The sixth (6th) surface is on the ground and can be neglected for this example as can be the effect of any outdoor air entering the space. Inside & outside design reference temperatures are 70°F & -10°F, respectively. Tunc = 37°F Tunc = 36°F Tunc = 30°F Tunc = 35°F
Air at 330 K and its humidity is 0.005 is used to dry a wet solid up to its relative humidity reached to 70%, then reheated to 330 K and reused to drying again up to its relative humidity reached to 70%. The final dry-bulb and wet-bulb temperatures of air are 308 K and 303.5 K respectively 305 K and 303.5 K respectively 308 K and 300 K respectively 302 K and 297 K respectively