A 500 V shunt motor running at 720 rpm takes an armature current of 50 A. The equivalent armature resistance is 0.4 ohm. What resistance must be placed in series with the armature to reduce the speed to 540 rpm while maintaining the same torque?

A 500 V shunt motor running at 720 rpm takes an armature current of 50 A. The equivalent armature resistance is 0.4 ohm. What resistance must be placed in series with the armature to reduce the speed to 540 rpm while maintaining the same torque?

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter7: Parallel Circuits

Section: Chapter Questions

Problem 4PP: Using the rules for parallel circuits and Ohmslaw, solve for the missing values....

See similar textbooks

Related questions

Q: A 240 V shunt motor has an armature current of 15 A when running at 800 rpm against full-load…

A: In this question we need to find a What resistance must be inserted in series with the armature to…

Q: OV DC series motor takes the line current of 30 A and runs at 750 rg d if torque is increased to 50…

Q: A series motor runs at 700 rev/min when the voltage is 300 V and the current is 20 A. The armature…

A: Initial speed of motor N1=700 rpm. Initial terminal voltage V1=300 V. Armature current Ia=20 A.…

Q: A 220 V series motor takes 15 A and runs at 700 rpm. The armature resistance including the…

A: The solution is given below

Q: A 230-volt series motor has an armature resistance of 0.32 ohm and a series-field resistance of 0.16…

A: Given: V=230 VRa=0.32 ΩN=500 rpmIa=32 A

Q: 10. A 120 V shunt motor has an armature equivalent of 0.5 ohm and a field resistance of 60 ohm. At…

Q: The resistance of each of the two coil of a series motor is 0.04 ohm, armature resistance 0.04 ohm.…

Q: A 120 V shunt motor has an armature equivalent of 0.5 ohm and a field resistance of 60 ohm. At full…

A: Given data, Armature resistance Ra=0.5 Ω Field resistance Rf=60 Ω Terminal voltage V = 120 V Load…

Q: the relation between armature and field currents in a series connected DC motor is O It = If + la O…

Q: A 200 V dc motor takes 50 A in series and is operating at a speed of 1000 rpm when full of…

A: Given, A dc motor with, Terminal voltage, V=200 V. Armature current, Ia=50 A. Operating speed,…

Q: A 220 V DC series motor runs drawing a current of 30 A from the supply. Armature and field circuit…

A: It is given that:

Q: Wils 2 (B)- Indicate whether the following statements are true or false and correct the false…

A: In this question we will write about dc shunt motor speed , series motor torque etc... Note :- as…

Q: series motor runs at 800 rev/min when the voltage is 400V and the current is 25A. The armature…

Q: A 5 kW, 200 V dc shunt motor has armature resistance of 1 ohm and shunt field resistance of 100 ohm.…

A: Given, A 5 kW, 200 V dc shunt motor has Armature resistance, Ra= 1 ohm Shunt field resistance, Rf=…

Q: A 400 V series motor has a field resistance of 0.2 ohm and an armature resistance of0.1 ohm. The…

A: This question belongs to electrical machine . It comes under the d.c. series motor . It is based on…

Q: A 240 V d.c. series motor takes 40 A when giving its rated output at 1500 rpm. Its resistance is 0.3…

A: Given, Supply voltage, V= 240 V Armature resistance, Ra= 0.3 ohm Armature current, Ia= 40 A Speed in…

Q: A DC series motor of resistance 1 ohm across terminals runs at 1000 rpm at 250 V taking a current of…

A: Given, a DC series motor having Resistance across terminal, Rt = 1 ohm Speed, N1 = 1000 rpm Terminal…

Q: Write the solution neatly. A 230 V d.c. shunt motor, having an armature resistance of 0.05 ohm and a…

A: According to the question we have to find the value of efficiency.

Q: A 220 V shunt motor has an armature resistance of 0.5 ohm and takes a current of 40 A on full-loads.…

A: The solution for given shunt motor can be achieved as follows.

Q: A 220 V shunt motor has an armature resistance of 0.4 ohm and field resistance of 140 ohm. The motor…

A: We have an shunt motor which is having, Voltage (V) = 220 V Armature resistance (Ra) = 0.4 Ω Field…

Q: The overall efficiency of a 4-pole DC motor is 83.5% when running at a speed of 550 rpm. The motor…

Q: A 15-hp 440-volt compound motor has a shunt-field resistance of 293 ohms and takes 28.5 amp at rated…

A: Armature induced emf = K×(flux ×Speed ) Where K is constant. Neglecting rotational loss developed…

Q: series motor is

Q: A dc series motor has an armature resistance of 0.06 Q and series field resistance of 0.08 Q. The…

A: As two questions are different so iam solving only one question i.e 1st question. take ratio of back…

Q: A 240V dc series motor has armature and field resistances of 0.5 W and 1 W respectively. When…

A: Torque of DC series motor is directly proportional to square of armature current. Back emf of DC…

Q: A 250 V d.c. shunt motor takes a current of 20 A. Resistance of shunt field winding is 200 ohm and…

A: Given: A D.C. shunt motor has, Supply voltage, Vs=250 V Load current, IL=20 A Field resistance,…

Q: speed of rpm armature current of 200 A. The resistance of armature is 0.12 02. Calculate the speed…

Q: full load current of 50 A is generated by a 250 V d.c. shunt motor with a 0.5 ohm armature…

A: In this question we will find ratio of stalling torque to full load torque...

Q: A 500 V shunt motor running at 720 rpm takes an armature current of 50 Amp,its effective resistance…

Q: A 220 V shunt motor driving its normal load draws an armature current of 50 A from a 220 V dc…

Q: A DC series motor having a resistance of 0.4 ꭥ and runs at 2000 rpm when connected to 250 V supply…

A: In DC series motor, field, and armature winding connected in series so flux is directly proportional…

Concept explainers

DC Series Motors

A DC motor is a type of electric motor which converts electric energy into mechanical energy. The forces that are produced by the magnetic field are what those common types of motors rely upon. Either electro-mechanical or electronic, all types of DC motors have some internal mechanism to change the current direction in part of the DC motors. As the DC motors could be powered from existing DC lighting power distribution systems, these motors were the first form of motors widely used. By changing the strength of the current in its field winding or by using a variable supply voltage, the speed of the DC motors can be controlled over a wide range.

Question

A) A.2.2 ohms
B) B. 2.6 ohms
(c) C. 2.4 ohms
D. 2.8 ohms

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A circuit consists of an AC voltage source, a 10-ohm resistor, and a capacitor, all connected in series. The magnitude of the impedance of the capacitor is also 10 ohms. Which of the following is true about the source voltage and the current through the circuit? a. Insufficient information is given. b. The source voltage will lag the current. c. The source voltage will lead the current. d. The source voltage will be in-phase with the current.
Q4. The source current in the circuit shown is in Figure 3a) What impedance should be connected across terminals a,b for maximum average powertransfer?b) What is the average power transferred to the impedance in (a)?c) Assume that the load is restricted to pure resistance. What size resistor connected across a,bwill result in the maximum average power transferred?d) What is the average power transferred to the resistor in (c)?v
A string of suspension consists of four (4) units. The Voltage between each pin and earth is 0.12 of the Self-Capacitance of the unit. The Voltage between the Line Conductor and earth is 135KV. Find the Voltage distribution across each unit and the String Efficiency
The number of disc insulators used in a suspension insulator setup with string efficiency 80 %, phase voltage 33 kV, and the voltage across insulator nearest to conductor 11 kV is .......................... Complete the answer.
7. TY Hat CHICL Ans. 1. Iron los.........varies approximately as V². 2. Cu loss..........it also varies as ² but decreases with an increase in voltage if constant kVA output is assumed. 3. Efficiency...........for distribution transformers, efficiency at fractional loads decreases with in- crease in voltage while at full load or overload it increases with increase in voltage and vice- versa. 4. Regulation..........it varies as but decreases with increase in voltage if constant kVA output is assumed. 5. Heating.........for constant kVA output, iron temperatures increase whereas Cu temperatures decrease with increase in voltages and vice-versa. quems
Discuss Fully the various methods available for transforming 3-phase voltages to higher or lower 3-phase voltages. Highlight the advantages and disadvantages of each. Include the connection diagrams.
(b) A symmetrical three-wire three-phase supply as shown in Figure Q2(b) is connected to a balanced three-phase load. The value of impedance, Z is identified to be 100-j75 Q. (i) Find IaB, IBC and ICa (ii) Determine Iaa, IbB and Ic (iii) Determine Iba, Isb and Ix (iv) Draw the phasor diagram of all currents in Q(b)(i) and Q(b)(ii)
Derive the formula and relation for voltage and current in a pure resistive- AC circuit and prove that in this type of circuit, the current and the voltage are always in phase.
2. Syngas enegy content is about....... a. Two time of natural gas b. Half of natural gas c. No energy is available
for the circuit in in the Figure, : 1.Determine the approximate values of Iin_______ μA 2.Determine the approximate values of IF______ μA
Give topics that has relevant innovation nowadays related to the Electrical Engineering that use solar panel and explain the innovation on each topics?
Determine the branch currents Is, Igandl, in ampere. TVⒸ so www 14 Eng al. The current in ampere 11 [Select] b). The current in ampere 12 [Select] 60 www d. The current in ampere 13 [Select] 40