A 5-m-wide, 4-m-high, and 40-m-long kiln used to cure concrete pipes is made of 20-cm-thick concrete walls and ceiling (k = 0.9 Wim-K). The kiln is maintained at100°C by injecting hot steam into it. The two ends of the kiln, 4 m x 5 m in size, are made of a 3-mm-thick sheet metal covered with 2-cm-thick Styrofoam (k = 0.033Wim-K). The convection heat transfer coefficlents on the inner and the outer surfaces of the klin are 3000 Wim²K and 25 W/m2.K, respectively. Disregarding anyheat loss through the floor, determine the rate of heat loss (in w) from the kiln when the ambient air is at 2°C.40 m4 m20 cm5 m

Answered: Image /qna-images/answer/0263be8f-f77f-423f-938e-f5c8147e4b5e.jpg

A 5-m-wide, 4-m-high, and 40-m-long kln used to cure concrete pipes is made of 20-cm-thick concrete walls and celling (k = 0.9 W/m K). The kiln is maintained at 100°C by injecting hot steam into It. The two ends of the kiln, 4 m x 5 m in size, are made of a 3-mm-thick sheet metal covered with 2-cm-thick Styrofoam (k = 0.033 W/m K). The convection heat transfer coefficlents on the Inner and the outer surfaces of the klin are 3000 W/m2 K and 25 W/m²«K, respectively. Disregarding any heat loss through the floor, determine the rate of heat loss (in W) from the kiln when the amblent alr is at 2'C.

A 5-m-wide, 4-m-high, and 40-m-long kln used to cure concrete pipes is made of 20-cm-thick concrete walls and celling (k = 0.9 W/m K). The kiln is maintained at 100°C by injecting hot steam into It. The two ends of the kiln, 4 m x 5 m in size, are made of a 3-mm-thick sheet metal covered with 2-cm-thick Styrofoam (k = 0.033 W/m K). The convection heat transfer coefficlents on the Inner and the outer surfaces of the klin are 3000 W/m2 K and 25 W/m²«K, respectively. Disregarding any heat loss through the floor, determine the rate of heat loss (in W) from the kiln when the amblent alr is at 2'C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Troom = 25°C Problem-4: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k = 15 W/m-K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The walls of the room are also at 25°C. The outer surface of the tank is black (emissivity = 1), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m²-K and 10 W/m².K, respectively. Determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0°C that melts during a 24-h period. The heat of the fusion of water at atmospheric pressure is hf5 333.7 kJ/kg. Iced water D D₁= 8 m Tin = 0°C 1.5 cm
A vertical furnace wall is made up of an inner wall of firebrick 20 cm thick followed by insulating brick 15 cm thick and an outer wall of steel 1 cm thick. The surface temperature of the wall adjacent to the combustion chamber is 1200°C while that of the outer surface of steel is 50°C. The thermal conductivities of the wall material in W/m-K are: firebrick, 10; insulating brick, 0.26; and steel, 45. Neglecting the film resistances and contact resistance of joints, determine the heat loss per sq. m. of wall area. Badly needed asap. I will rate helpful. Thank you in advance.
A long 3-mm diameter rod of steel (ρ = 7840 kg/m3, c = 460 J/kgK, k = 43 W/mK)has a uniform initial temperature of 650C. The rod is then suddenly immersed in alarge container of 25C water. The hot rod causes the water immediately surroundingthe rod to boil, giving rise to a heat transfer coefficient of 5600 W/m2K. The boilingstops when the rod reaches a temperature of 100C, at which time the heat transfercoefficient becomes 750 W/m2K. Find the time period during which boiling occursand the total time required for the rod to reach a temperature of 40C. Use acharacteristic length for this problem.
An experiment is to be conducted to determine heat transfer coefficient on the surfaces of tomatoes that are placed in cold water at 7°C. The tomatoes (k = 0.59 W/m·K, a =0.141 * 10-6 m2/s, r = 999 kg/m3, cp = 3.99 kJ/kg·K) with an initial uniform temperature of 30°C are spherical in shape with a diameter of 8 cm. After a period of 2 h, the temperatures at the center and the surface of the tomatoes are measured to be 10.0°C and 7.1°C, respectively. Using analytical one-term approximation method (not the Heisler charts), determine the heat transfer coefficient and the amount of heat transfer during this period if there are eight such tomatoes in water.
A 2-cm-diameter plastic rod has a thermocouple inserted to measure temperature at the center of the rod. The plastic rod (r = 1190 kg/m3, cp = 1465 J/kg·K, and k = 0.19 W/m·K) was initially heated to a uniform temperature of 70°C, and allowed to be cooled in ambient air temperature of 25°C. After 1388 s of cooling, the thermocouple measured the temperature at the center of the rod to be 30°C. Determine the convection heat transfer coefficient for this process. Solve this problem using analytical one-term approximation method (not the Heisler charts).
The 10-mm-thick bottom of a 200-mm-diameter pan may be made from aluminum (k = 240 W/m-K) or copper (k = 390 W/m-K). When used to boil water, the surface of the bottom exposed to the water is nominally at 110°C and heat is transferred from the stove to the pan at a rate of 1200 W. What is the temperature of the surface in contact with the stove for each of the two materials? Aluminum: T = i °C Copper: T = °C Physical Properties Mathematical Functions