A 33 m beam has two supports. It overhangs each support by 5 m. The beam carries a point load of 600 kN at the extreme right end and another point load of 900 kN at 8 m from the left end. It also has a distributed load of 159 kN/m over its entire length. Calculate the support reactions. left support = 3275.7 kN; right support = 3471.3 kN (Ans.)

A 33 m beam has two supports. It overhangs each support by 5 m. The beam carries a point load of 600 kN at the extreme right end and another point load of 900 kN at 8 m from the left end. It also has a distributed load of 159 kN/m over its entire length. Calculate the support reactions. left support = 3275.7 kN; right support = 3471.3 kN (Ans.)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.4.3P: A fixed-end beam AB supports a uniform load of intensity q = 75 lb/ft acting over part of the span....

See similar textbooks

Similar questions

A beam ABCDE is simply supported at A and D. It carries the following loading: a distributed load of 30 kN/m between A and B; a concentrated load of 20 kN at B; a concentrated load of 20 kN at C; a concentrated load of 10 kN at E; a distributed load of 60 kN/m between D and E. Span AB=1.5 m BC=CD=DE=1 m. A. Draw the FBD B. Calculate the value of the reactions at A and D and hence draw the S.F. and B.M. diagrams. C. What are the magnitude and position of the maximum B.M. on the beam?
Aluminum 10K 12' Steel A 12' long beam in supported by an aluminum hanger at A and by a steel hanger at B. The beam carries a single 10K concentrated load. Neglect the self-weight of the beam. Both hangers have the same original length. Ealum = 10,000,000 psi Esteel = 29,000,000 psi If the load is located at midspan, and the steel hanger is a 1/2" x 1/2" bar, what is the width of the 1/2" aluminum bar, such that points A and B lie on the same horizontal line?
6. The beam shown carries vertical loads. Calculate the reaction at each support. Neglect the weight of the beam. 8000 lb 03. 3'-0" 3'-0" 12-0" w = 600 lb/ft L = 24'-0" 3500 lb 4'-0" 2'-0" B
Pls all of them
please help! 15 minutes left! upvote will be given! NO EXPLANATION NEEDED! STATICS OF RIGID BODIES. WRITE THE SOLUTIONS LEGIBLY. 3 DECIMALS
1. Determine the hinge reactions (in kN) at point B for the beam shown. ( Show COMPLETE solutions in all the problems. FREE BODY DIAGRAMS ARE REQUIRED FOR EVERY PROBLEM BEFORE NUMERICAL SOLUTIONS. )
Compute the reactions at A for the cantilever beam subjected to the distributed load shown. The distributed load reaches a maximum value of 2.4 kN/m at x = 3.1 m.
please answer do not image format
1
Please also find the FBD in the problem
2. The 5 m long beam AB has two types of distributed loads, and one concentrated load as shown. Find the reactions at each end. WDR = 160 N 1.0 m WDT = 200 N WOT, +2/3 m 300 N 200 N/m 80 N/m B A 1.00 m RB 2.00 m 2.00 m RA 3. The roof truss shown has its upper chord symmetrically loaded , with a single load at its lower chord. Find the end reactions R1 and R2. 4 kN 4 kN 4 kN 4 kN- 2, kN 4 kN 2 kN 4.50 m A 24 kN RA 6 kN Rc 6 panels @ 3 m 18 m
A uniform light beam has length 6 m. The lefthand side rests on a roller and the right hand sideis welded horizontally to a support. It bears a uniform load of 2 kN/m downwards, a concentrateddownwards load of 3 kN at x = 2 m and a concentrated anticlockwise couple of 4 kN.m at x = 4 m.Determine the form of the beam.