A 3-phase transmission line having a capacity of 10,000KVA serves as a balanced load that draws 5,000kW at a lagging power factor such that the transmission line is loaded to its capacity. An additional load of induction motors operating at an average pf of 0.80 is connected to the line. In order to make use of the line to its full capacity in active power, a synchronous condenser having losses of 300kW will be connected to the line. What is the kVA rating of the synchronous motor required? Draw the Phasor Diagram for Synchronous Motor

A 3-phase transmission line having a capacity of 10,000KVA serves as a balanced load that draws 5,000kW at a lagging power factor such that the transmission line is loaded to its capacity. An additional load of induction motors operating at an average pf of 0.80 is connected to the line. In order to make use of the line to its full capacity in active power, a synchronous condenser having losses of 300kW will be connected to the line. What is the kVA rating of the synchronous motor required? Draw the Phasor Diagram for Synchronous Motor

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

clear and correct or dislike
please answer all subparts
A 5 kVA single-phase motor operating at 380 Vrms with a power factor of 0.8 in lagging will have a full load operating current of
A 5 kVA single phase motor operating at 380 Vrms with a power factor of 0.8 lagging will have a magnitude of full load operating current of a) 13.16 Arms b) 18.61 Arms c)76mA rms d) None of the above
Multi-stage impulse generator with 14 stages and 6/50 µsec impulse wave. The testing object value equals 75 nF, the total charging capacitance of the generator is 0.15 μF. The rated voltage equals equals 580 kV. Neglecting stray capacitances, find: a) The shaping resistor (front resistance). b) The shaping resistor (tail resistance). c) If the charging voltage is 350 kV, calculate the maximum output voltage. R1 R1 R1 + DC Voltage G1 vo R2 R1 G2 Vo R2 G3 R2 G4 KE R2 C1 RO
pls find a and b
A 15-Kv, 35-KVA O.76P.flagging SOHZ Four-Pole Y-connected Stecim - turbine generatov has a synchronous reactane of 3.50r perphase and an armatnre resi stenue of 0:75r Per Phase Ihis generat is operating in parallel with large fower Systemm C Infinite bus) What is the magnitude of fA at rated to nditiun- 5IF He field Cumeit is constaut, Whet is the Max in um power possible out of this How much reserve power or tougue does this genevatou have at full load? What is te gen-eratur; tovque angle at rated candition. genevatr? O Sketch He covrespouding ghasor diagrem aud calcu. for the armatune cumert Cassume Hhe freld cument is sti une hauged) · OAt te alsolute fower posible, how much reactive prwer uwill this generatuv be Supplying or consuming ?
a syn A: A sylienfonotus generator of 100 MVA, 22 kV, and 0.25 pu transient reactance supplies a motor of 50 MVA, 22 kV, and 0.2 pu transient reactance. The motor is drawing 40 MW at 0.8 power factor leading and terminal voltage of 21.9 kV. The line connecting them has a reactance of 0.05 pu on a base of 100 MVA. Find the transient currents in the generator, the motor, and the fault when a 3-ph fault occurs at the motor terminals. Take SB = 100 MVA, VB = 22 kV, and use the internal voltages %3D %3D of the machines method.
problem 2 1. what is the voltage provided by the building 2. What is the amount of current provided to the bullding? 3. If the building consumes 3200W of power, what is it's power factor? 4. What is the phase angle of the secondary power source in the bullding?
A 3Ø, Y-connected alternator is rated at 1,600KVA, 13.5KV. The armature effective AC resistance per phase is 1.5Ω. The percentage regulation for a load of 1,280kW at unity power factor is 3.5%. Determine:(a) synchronous reactance of the alternator(b) %VR at full-load 0.8pf leading(c) What is the effect on %VR value if taken at half-load lagging pf? Justify andexplain briefly your answer on one(1) sentence.
Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. Given the following loads, determine the total power (real, reactive and apparent), current and power factor.