A 3 meter tall aluminum tank with a 7 meter diameter is completely filled with ethanol. The empty weight of the tank is 250 kg. If the ethanol starts at 25 deg C, and there is 3000 kJ of heat available for transfer, what final temperature can be reached? And, what percentage of the heat transferred does the ethanol and aluminum each account for? (ethanol density = .789 kg/L

Q: An aluminium pan whose thermal conductivity is 237 W/m/°C has a flat bottom whose diameter is 20 cm…

A:

Q: A food product with 80% moisture content in a 5 cm diameter can wants to be frozen. The density of…

A: The system is a lumped parameter model as Biot number is <0.1 The lumped parameter model for…

Q: 1-85 A transistor with a height of 0.4 cm and a diameter of 0.6 cm is mounted on a circuit board.…

A: given = H = 0.4 cm d = 0.6 cm avg heat transfer coefficient = 30 W/m2K air temp Tair = 55^c…

Q: Hot oil at a flow rate of 7.2 kg/s (average c, = 1.92 kJ/kgK) enters an existing counter-flow one to…

A: Given:  Inlet hot oil Temperature = T1 = 385 K  Inlet water Temperature = T3 = 295 K  Outlet water…

Q: Water at 20 °C flows at 3 m/s in the annulus of a c The annulus is the area between two concentric…

A:

Q: Athin isothermal disk, having a diameter of 1.8 cm, is maintained at 40◦C and buried in a…

A: Given  thermal conductivity k= 0.8 W/m· ◦C  diameter of disk is D = 1.8 cm  radius = 0.9 cm = 0.009…

Q: A metallic solid cylinder has a diameter of 11 cm and initial temperature of 300oC. The cylinder is…

A: Given, d= 11cm = 0.11m, r = 0.055m Ti = 300oC Tx = 50oC h = 1200W/m2oC Q = 4.9*106 J/m k = 204W/moC,…

Q: As the water flows through a pipe with an inner diameter of 5 cm and a length of 10 m, it heats up…

A: Inner diameter of the pipe, di = 5 cm = 0.05 m Length of the pipe, L = 10 m Initial water…

Q: Determine the average convection heat transfer coefficient in a pipe (diameter d = 8 cm, length L =…

A:

Q: Question 3 A pipeline is constructed by a proposed material M with thermal conductivity of 0.0015…

A:

Q: There is a 4" O.D. vertical pipe made of 316 stainless steel. Calculate the heat flux (q/A) per unit…

A: Heat flux for radiation and free convection it be calculated.

Q: A vessel with a paddle agitator and no baffles is used to heat a liquid at 37.8degC in this vessel.…

A: Given Inside diameter of the vessel, Di=1.22 m Diameter of the agitator, Da=0.406 m Speed of the…

Q: <p A horizontal tube-bundle air-cooled exchanger is used to condense steam at 250 F and has the…

A: I'll answer each question step-by-step, using the given information from the image.1. What is the…

Q: A metallic solid cylinder has a diameter of 11 cm and initial temperature of 300oC. The cylinder is…

A:

Q: A long circular cylinder is encased and centered in a long square cylinder of concrete (k 1.2 W/m·K)…

A: Given , Thermal conductivity,k=1.2W/mKTemperature of cylinder,T1=200°C=473KTemperature of…

Q: A spherical object at 10 °C was taken into a bath at 60 °C. The core temperature-time values ​​of…

A: Answer: Initial temperature of the spherical object, T0 = 10°C = 283 K Bath temperature, T∞ = 60°C =…

Q: Water available at 24 C is heated by a heating element having 30 mm outside diameter and 0.4 m…

A: Cp=4180J/kg.∘C k=0.64W/m∘C density(r)=988kg/m3 μ=0.55×10-3N-S/m2 Ts=80∘C length=0.4m do=30mm=0.03m…

Q: 2.6 A cylinder 10 m high, with a cross-sectional area of 0.1 m², has a mass-less piston at the…

A:

Q: Air at 2 bar and 40°C is heated as it flows through tube of diameter 30mm at a velocity of 10 m/s.…

A: Given, Pressure P = 2 bar Velocity = 10 m/s

Q: A bioengineer working at chemical company intends to dry an insoluble wet granular material in a pan…

A: Given Data : Dimensions of the pan = 0.6 m x 0.6 m x 0.03 m  The pan is insulated from the sides and…

Q: Q2. An annulus consists of the region between two concentric tubes having diameters of 3 cm and 5…

A:

Q: Polymer laminates are formed by “squeezing” two flat sheets of polymer together under high pressure.…

A: To derive an expression for the temperature as a function of time and position in the two polymer…

Q: A large spherical storage tank, 2 m in diameter, is buried in the earth at a location where the…

A:

Q: Q5) A cube of aluminum 10 cm on each side is initially at a temperature of 300 °C and is immersed in…

A:

Q: Find the two-dimensional temperature distribution T(tz) under steady state condition. Where, To-20…

A: T0 = 20 C = 293 K T(L) = 1000 C = 1273 K Density (p) = 800 kg/m^3 k = 200 W / m K Cp = 2500 J/ kg K…

Q: A person does 30 kJ work on 2 kg of water by stirring using a paddle wheel. While stirring, around…

A:

Q: 2) A cylinder holds 200 kg of water at 120 °C at a pressure of 20 MPa. The temperature is increased…

A:

Q: 1. Assume steady-state conditions and a thermal conductivity of k 1.5 W/m-K. a. Determine the…

A: Heat Transfer: It is normally from a high-temperature object to a lower temperature object. This has…

Q: A piston-cylinder assembly has 1 kg of air at 700 kPa and 400C. The piston cross-sectional area is…

A: This problem is based on the concept of ideal gas law. The data given : Initial temperature ,T1 =…

Q: Q2-A hollow stainless-steel cylinder having an inside diameter of 4 cm and thickness of 1 cm is…

A: Assumptions Steady state heat transfer takes place inside the cylinder. The cylinder has heat…

Q: 1/6 Convection Ex. 3.15: air at 101.325 kPa and 308 K (35 °C) flows across a 50 mm diameter cylinder…

A: Given Diameter of cylinder D = 50 mm Density d = 0.966 Conductivity k = 0.0312 NPr = 0.695

Q: The double pipe 1 m length heat exchanger is essentially a set of concentric pipes. One fluid flows…

A: Let's find LMTD to know the average of the temperature difference between  the hot and cold ends of…

Q: A shaft of 0.06-m diameter is heat treated in a gas-fired furnace whose gases is at 1200 K and…

A: Given information: Shaft diameter, d = 0.06 m Gas temperature, T∞ = 1200 K Convection coefficient, h…

Q: Initially 10°C water is heated to 80°C as it flows with a mass flow rate of 0.0825 kg/s through a…

A: