A 20 cm thick slab of aluminums (k = 230 W/mK) is placed in contact with a 15 cmthick stainless-steel plate (k= 15 W/mK). Due to roughness, 40 percent of the area is in directcontact and the gap (0.0002 m) is filled with air (k = 0.032 W/mK). The difference intemperature between the two outside surfaces of the plate is 200°C Estimate (i) the heat flowrate, (ii) the contact resistance, and (iii) the drop in temperature at the interface.AlAir0603Steel

Given Data Thickness of slab is : L1=20 cm=0.2 m Thermal conductivity of aluminum is : kal=230…

A 20 cm thick slab of aluminums (k = 230 W/mK) is placed in contact with a 15 thick stainless-steel plate (k = 15 W/mK). Due to roughness, 40 percent of the area is in dir contact and the gap (0.0002 m) is filled with air (k = 0.032 W/mK). The difference temperature between the two outside surfaces of the plate is 200°C Estimate (i) the heat f rate, (ii) the contact resistance, and (iii) the drop in temperature at the interface. Al Air 06 1m

A 20 cm thick slab of aluminums (k = 230 W/mK) is placed in contact with a 15 thick stainless-steel plate (k = 15 W/mK). Due to roughness, 40 percent of the area is in dir contact and the gap (0.0002 m) is filled with air (k = 0.032 W/mK). The difference temperature between the two outside surfaces of the plate is 200°C Estimate (i) the heat f rate, (ii) the contact resistance, and (iii) the drop in temperature at the interface. Al Air 06 1m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a large plane wall of thickness 2L=20mm. Both surfaces of the wall are convectively cooled by the surrounding coolant at To = 250°C with a heat transfer coefficient of h= 1100 W/m².K. A fuel element of a nuclear reactor is considered in the shape of this large plane wall with given constant thermal properties as thermal conductivity k = 30 W/m.K and a = 5 x 10-6m²/s. It is known that heat is generated uniformly within the element at a volumetric rate of q = 1x 107W /m³. A departure from the steady-state conditions associated with normal operation will occur if there is a change in the generation rate. Consider a sudden change to q2 = 2 x 107W/m³. Assuming steady one-dimensional heat transfer along the wall, use the explicit finite- difference method to show how to calculate temperature To at 1.2 sec and temperature Ts at 1.5 sec. (show which equation to use and the calculations in details)
2. An 18-cm-long, 16-cm-wide, and 12-cm-high metal block (p = 8000 kg/m', c, = 400 J/kg°C, k=200 W/mK) initially at 20 °C is placed in an oven at 600 °C for heat treatment. The heat transfer coefficient on the surface of the block is 40 W/m "C. How long time is required for the iron block to reach a temperature of 400 °C? 1321 35°C Güneş 1407 20021
You are designing a small heatsink to cool a high-powered IC on a control unit PCB. The IC puts out 40,000 W/m2 and has a size of 40mm x 20mm. A fan blows 40 degrees C air across the IC at a speed of 4 m/s. The IC is well insulated on its back face. If the convection coefficient is 62 W/m2K, what is the surface temperature of the IC?
A horizontal pipe having a surface temperature of 67 °C and diameter of 25 cm is buried at a depth of 1.2 m in the earth at a location where k = 1.8 W/m-°C. The earth surface temperature is 15 °C. Calculate the shape factor if the pipe length is 10 m.
Troom = 25°C Problem-4: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k = 15 W/m-K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The walls of the room are also at 25°C. The outer surface of the tank is black (emissivity = 1), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m²-K and 10 W/m².K, respectively. Determine (a) the rate of heat transfer to the iced water in the tank and (b) the amount of ice at 0°C that melts during a 24-h period. The heat of the fusion of water at atmospheric pressure is hf5 333.7 kJ/kg. Iced water D D₁= 8 m Tin = 0°C 1.5 cm
Heat is generated inside a solid cylinder (D=30 cm, L=90 cm, k=5 W/m.K ) at q=6x104 W/m2. Determine the surface temperature of the cylinder if it is surrounded with a fluid with Ta=20 oC, and ha=50 W/m2.K). Note that at the surface Qcond=Qconv
The length of one side of a cube-shaped freezer cabinet is 11.8 m. your closetits base is perfectly insulated against heat transfer and the inner surface temperature is –5 °C, the outer surface temperatureand it is 59°C. To ensure that the thermal load of the cabinet is not less than 0.59 kWThe thickness of the styrofoam foam insulation (k=0.03 W/mK) to be applied to the upper and side surfacesWhat should be less?
Please answer all parts
The outside temperature on a particular winter's day is 0°C. Consider two identical houses, each of external surface area 200 m² and internal temperature 20°C. The walls of the first are constructed of a single layer of brick, of thermal conductivity 1 W m-1 °C-1 and thickness 20 cm. What is the heat flux Q out of this house? What is its rate of heat loss in Watts? The walls of the second house are constructed of two layers of brick, each 10 cm thick, and a layer of insulation, also 10 cm thick. The insulation is made mostly out of air, thermal conductivity 0.01 W m of heat loss from this house? How different would your answer be if you neglected the layers of brick in this calculation? -1 °C-1. what are the heat flux and the rate
0.809 and 0.795 3-176 The overall heat transfer coefficient of a wan s determined to be U= 0,425 W/m-°C under the condi- tions of still air inside and winds of 12 km/h outside. What will the U-factor be when the wind velocity outside is doubled? Answer: 0.428 W/m-°C ransler olls of
I need handwritten or I'll dislike