A 16-cylinder, 39.37cm x 55.88cm x 327-rpm, 4-cycle stationary, diesel engine is connected to a 3,125 KVA (80% Power Factor) generator. It also drives a 30-kW exciter. Assume a generator efficiency of 92% and determine the Break-Mean-Effective-Pressure (BMEP), in kg/cm2, at rated load.

A 16-cylinder, 39.37cm x 55.88cm x 327-rpm, 4-cycle stationary, diesel engine is connected to a 3,125 KVA (80% Power Factor) generator. It also drives a 30-kW exciter. Assume a generator efficiency of 92% and determine the Break-Mean-Effective-Pressure (BMEP), in kg/cm2, at rated load.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Q2/ A three-phase, 0.8 MVA, 3.3 kV, star connected synchronous generator has 5 Ohm per phase synchronous reactance and negligible armature resistance. Find the: a- Percentage voltage regulation at 0.8 lcading power factor at full load b- Load angle at unity power factor. c- Excitation voltage when the generator operating at half the full load with 0.8 lagging power factor.
A 381 V, 50 Hz, Y-connected, eight poles synchronous generator has the OCC given in tabular form below (Phase Voltage versus the field current). The generator has a per-phase synchronous reactance of 0.2 Q, and a negligible armature resistance. At full-load: The machine supplies 500 A armature current at 0.8 PF lagging. How much field current must be supplied to the generator to make the terminal voltage 380 V? EA. (V) 65 125 260 290 320 350 380 420 450 470 IF. (A) 0.00 0.5 1.0 2.0 2.25 2.55 2.7 3.0 3.7 4.1 4.25 Select one: O a. Ip = 1.8 A O b. Ip = 4.1 A O c. None O d. IF = 2.25 A Clear my choice
(021) Q21) A 5-k VA, 220-V, Y-connected, three-phase, salient-pole synchronous generator is used to supply power to a unity pf load. By means of a slip test, the direct-axis synchronous reactance is found to be 122 and the quadrature-axis synchronous reactance 792. Assume that rated current is delivered to the load at rated voltage and that armature resistance is negligible. (a) Compute the corresponding value of the excitation voltage. (b) What is the value of the internal phase displacement angle Y. (c) What is the value of the power angle? (d) Draw a carefully labeled phasor diagram. Q22) Repeat Prob.21 for the case where the load pf is 0.8 lagging. Q23) Repeat Prob.21 for the case where the load pf is 0.8 leading.
Please solve it quickly
A three-phase, Y-connected, 220-V synchronous generator has an armature resistance of 0.22 Q/phase and a synchronous reactance of 5.2 Q/phase. At the rated voltage, the generator delivers 9.7-kVA to a load at a power factor of 0.83 lagging. A. Determine the excitation voltage, EA. B. Determine the efficiency of the generator if the friction and windage losses are 0.29 KW and the core losses are 0.45 KW. Ignore stray losses. Insert the efficiency below (numbers only):
Electrical Engineering Topic. Please help to provide neat and correct solution for the given problem below. Thank you.
Q2. a) A 415V, 50Hz, 3-phase induction motor supplies its rated power to a load. The rated speed of the motor is 980 rpm. b) Two synchronous generators, G2 and G2, are connected parallelly supplying a load. Generator G1 has a no-load frequency of 50.5 Hz and a slope of 300 MW/Hz. Generator G2 has a no-load frequency of 50.2 Hz and a slope of 500 MW/Hz. The load consumes 250 MW real power. (i) At what frequency does this system operate, and how much power is supplied by each of the two generators? (ii) An additional 100 MW load is added to this power system. What is the new system frequency, and how much power do G1 and G2 supply? (iii) The governor set point of G2 is changed to control system frequency back to 50 Hz. Determine the G2 governor set point.
Terminal voltage of shunt G1 generator in idle operation is 500 V. The terminal voltage of the G1 generator drops to 470 V if it delivers a load current of 600 A. The idle operating voltage of the shunt G2 generator is 505 V. G2 generator terminal voltage drops to 470 V in case of 400 A load current. These two generators are connected in parallel to feed a load of 400 kW. Voltage-power characteristics of generators are linear. According to this; a. Draw the connection diagram given in the question. b. Obtain the network voltage and the powers of the generators. c. Calculate the current given by each generator to the load.