A 15 mm 3 15 mm silicon chip is mounted such that the edges are flush in a substrate. The chip dissipates 1.4 W of power uniformly, while air at 20°C (1 atm) with a velocity of 25 m/s is used to cool the upper surface of the chip. If the substrate provides an unheated starting length of 15 mm, determine the surface temperature at the trailing edge of the chip. Evaluate the air properties at 50°C

Q: Air at 1 atm and 40°C is flowing over the top surface of a 0.2 m x 0.5 m-thin metal foil. The air…

A: Given data: Air at 1 atm pressure and temperature,, is flowing over a thin metal foil of surface…

Q: A long aluminum wire of diameter 3 mm is extruded at a temperature of 280°C. The wire is subjected…

A: To find:The rate of heat transfer from the wire to the air per meter length when it is first exposed…

Q: Water at 43.3°C flows over a large square plate at a velocity of 28 cm/s. The plate is 1.2 m long…

A:

Q: The average convection heat transfer coefficient during this cooling process is ____ W/m2·°C

A: Given DataThe steel ballDensity ρ = 8055 kg/m3Specific heat cp = 480 J/kg·KThe diameter  D =0.15…

Q: A manufacturing plant produces an efluent as a waste product. As part of a waste heat recovery…

A: Firstly, convert all temperatures in oC The temperature of the system, The temperature of water at…

Q: ir at 3*10-4 kg/s and 27°C enters a rectangular duct that is 1 m long and 4 mm x 16 mm on the sides.…

A: Given: m˙ = 3×10-4 kg/s Tm,i=27oC=300K L =1 m W = 16mm=0.016m h = 4mm=0.004m qs˙= 600 W/m2

Q: Use the following air properties to solve the problem: p = 1.2kg/m³, μ = 1.8 10-5kg/ms, C₂ = 1007…

A: Given: Air Properties Air temperature T∞=20oC Average speed V∞=1m/s Heat flux q˙s=200 W/m2 To…

Q: Oranges of 2.5-in-diameter (k= 0.26 Btu/h·ft·°F) and α= 1.4 10-6 ft2/s) initially at a uniform…

A:

Q: The cake mix, whose initial temperature is 25°C, will be baked at 120°C in a cylindrical mold. It…

A: Given: The initial temperature is Ti=25°C. The baking temperature of cylindrical mold is Tf=120°C.…

Q: Air at 206.8 kPa and at an average temperature of 200 oC is being heated as is flows through a tube…

A: Given data  Pressure = 206.8 kpa Average temperature= 200°C Inside diameter of pipe = 40mm Velocity…

Q: Consider a 50-mm-diameter and 25-m-long smooth tube that is maintained at a constant surface…

A:

Q: Compute the Nu numbers for air at 40°C flowing with 4 m/s speed over the following: 1) A Copper…

A: Given: The temperature of air, T = 40 C The air speed, v = 4 m/s The surface temperature, Ts = 80ᵒC…

Q: The airflow at 1 atm has a free stream velocity and temperature of 5 cm/s and 25°C, respectively.…

A: Heat transfer coefficient:The quantity of heat energy that is moved from one surface to another as…

Q: Consider a 26-cm x 31-cm printed circuit board (PCB) that has electronic components on one side. The…

A: Given:- Tf=32.5°C Ts=45°C T∞=20°C Q=8W To find:- Average hot surface temperature

Q: The upper surface of a 1 mx 1 m ASTM B152 copper plate is being cooled by air at 20°C. The air is…

A:

Q: Water at 43.3°C flows over a large square plate at a velocity of 20 cm/s. The plate is 2 m long (in…

A:

Q: SITUATIONAL PROBLEM I: A composite wall constructed of 2.5 cm of steel (k= 60.5 W/m-K) and 5.0cm of…

A:

Q: An average person body surface is approximately 2.0 m². Its skin temperature is 33°C. The convection…

A: Find convective heat transfer .

Q: Calculate the convective heat transfer rate from a 40-cm diameter horizontal pipe whose surface is…

A: Given data as per the question Diameter of pipe =40 cm Surg=face temperature of pipe =950 c The…

Q: ! Required information Air flows in a pipe under fully developed conditions with an average velocity…

A: To find: The wall temperature at the exit. Given: The average velocity of the air is vavg=1.25 m/s.…

Q: Thermodynamics problem. A membrane type electrical heater of 20,000 w/m? capacity is sandwiched…

A: