A 13.8 kg child sits on a 6.0 m long teeter-totter at a point 1.5 m from the pivot point (at the center of the teeter-totter). On the other side of the pivot point, an adult pushes straight down on the teeter-totter with a force of 180 N.Determine the direction the teeter-totter will rotate if the adult applies the force at a distance of each of the following from the pivot. (Assume the teeter-totter is horizontal when the adult applies the force and that the child's weight appliesa clockwise torque.)(a) 1.0 mO clockwiseO counterclockwise(b) 2.0 mO clockwiseO counterclockwise(c) 3.0 mO clockwiseO counterclockwise

Answered: Image /qna-images/answer/7db81bea-6329-4db0-aea3-15c4fd174c42.jpg

A 13.8 kg child sits on a 6.0 m long teeter-totter at a point 1.5 m from the pivot point (at the center of the teeter-totter). On the other side of the pivot point, an adult pushes straight down on the teeter-totter with a force of 180 N. Determine the direction the teeter-totter will rotate the adult applies the force at a distance of each of the following from the pivot. (Assume the teeter-totter is horizontal when the adult applies the force and that the child's weight applies a clockwise torque.) (a) 1.0 m O clockwise O counterclockwise (b) 2.0 m O clockwise O counterclockwise (c) 3.0 m O clockwise O counterclockwise

A 13.8 kg child sits on a 6.0 m long teeter-totter at a point 1.5 m from the pivot point (at the center of the teeter-totter). On the other side of the pivot point, an adult pushes straight down on the teeter-totter with a force of 180 N. Determine the direction the teeter-totter will rotate the adult applies the force at a distance of each of the following from the pivot. (Assume the teeter-totter is horizontal when the adult applies the force and that the child's weight applies a clockwise torque.) (a) 1.0 m O clockwise O counterclockwise (b) 2.0 m O clockwise O counterclockwise (c) 3.0 m O clockwise O counterclockwise

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

At what maximum speed can a car manage a turn on a wet, level road with coefficient of static friction 0.230 without sliding out of control? The radius of the turn is 25.0 m
A 10kg monkey climbs a uniform ladder with weight 120N and length 3m as shown in the figure. The ladder rests against the wall at an angle=60 degrees . The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that can support a maximum tension of only 80N. (a) Draw a free body diagram for the ladder. (b) Find the normal force exerted on the bottom of the ladder. (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. (d) Find the maximum distance that the monkey can climb the ladder before the rope breaks. (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem be changed and what other information would you need to answer parts (c) and (d)?
Alunch tray is being held in one hand, as the figure illustrates. The mass of the tray itself is 0.237 kg, and its center of gravity is located at its geometrical center. On the tray is a 1.19-kg plate of food and a 0.241-kg cup of coffee. Obtain (a) the force 7 exerted by the thumb and (b) the force exerted by the four fingers. Both forces act perpendicular to the tray, which is being held parallel to the ground. 0.400 m 0.380 m 0.240 m 0.100 m 0.0600 m henc henc
Consider the setup shown below. The blocks have masses 3.6 kg and 24 kg. The pulley has mass 7.4 kg, and is a uniform disc with radius 0.23 m. Assume the pulley to be fric- tionless, but the coefficient of friction between the block and the surface is 0.36. a T2 3.6 kg T1 = 0.36 22° 24 kg What is the acceleration of the blocks? As- sume the 24 kg mass is descending with accel- erațion a. The moment of inertia of the disk is - M R? and the acceleration of gravity is 2 9.8 m/s?. Answer in units of m/s?.
A 7-kg mass (m1) hangs from a cord that runs through a pulley and back down to attach to a 6-kg mass (m2) that is hanging from the other side. The pulley has a mass of 5.00-kg and a diameter of 20-cm. Find: A) the tension in the cord supporting m1 and the tension in the cord supporting m2; B) the tension in the cord supporting the pulley. C) Why is the answer to B) not equal to the sum of tensions in A)? Why is it not equal to the sum of the three weights?
A student gets his car stuck in a snow drift. Not at a loss, having studied physics, he attaches one end of a stout rope to the vehide and the other end to the trunk of a nearby tree, allowing for a small amount of slack. The student then exerts a force F on the center of the rope in the direction perpendicular to the car-tree line, as shown in the figure below. If the rope is inextensible and if the magnitude of the applied force is 504 N, what is the force on the car? (Assume equilibrium conditions.) KN 12 m Tree 0.50 m
7
8. A fisher slowly lifts a fish with a 6 m long fishing-rod, the mass of which 0.5 kg. One hand of the fisher holds grip at the end of the rod with a force 200 N, the other at a distance X from the end with a force 150 N. Find distance X and mass of the fish. Sketch the force diagram. Assume that the rod is a cylinder with uniform distribution of mass over its length.
1. Replace the assigned forces by a single force R at the rotation axis O.Determine:(a) the corresponding magnitude of R(b) the angle of R with respect to x-axis(c) the rotation of couple M2. from your answer above replace the force couple system by a single force.(a) Transmit the “tail” of the resultant R in the x-axis and determine the distance from tail to point O.(b) Transmit the “tail” of the resultant R in the y-axis and determine the distance from tail to point O. FORCES: F2=2N, F3=3N, F6=6N, F8=8N DEGREE: b= 20, c=25 SOLVE ONLY THE FOUR FORCES F2,F3,F6 AND F8 REFER TO THE IMAGES
It is sometimes important to determine the location of a person’s center of gravity(which coincides with the center of mass because the gravitational force is uniform at the scale of the human body). This can be done with the arrangement shown intheFigure below. A light (negligible mass) plank rests on two scales that read Fg1=380 N and Fg2=320 N. The scales are separated by a distance of 2.00 m. How far from the woman’s feet is her center of gravity?
14:09 P O J • Ziad Liu online i ols.liu. tem 25 A The wagon and the girl, shown in the following figure, has a weight of 100 N located at the center of gravity G. The front wheel is free to roll; the coefficient of friction for the rear wheel at 'A' is µA. If the applied force F = 50 N will cause the system just to move, the friction force at 'A' is: F (50 N) 30° 1 m 1m 0.5 m 0.5 m Select one: a. 43.3 N b. 0.938 N c. 50 N d. 46.13 N II
Can you also double check the answer. Thank you in advance