85. Within the elasic limit, elongation is proportional to the applied force. This law is ascribed to Faraday Henry Newton Hooke 86. Which of the followingnis not true of thecunit impilse function? The area under the curve is 0. Its value at t=0 is infinity The area under the curve Its laplace transformmis 1.is 1. 87. Consider a series connection of R=2 Ohms, C-3F, a switch, and a voltage source, E=12 Volts. Assume that the capacitor is initially uncharged. If the switch is flipped on at t=0, what will be the charge on the capacitor immediately after the switched is closed? 5C 6C OC 1.5 C

85. Within the elasic limit, elongation is proportional to the applied force. This law is ascribed to Faraday Henry Newton Hooke 86. Which of the followingnis not true of thecunit impilse function? The area under the curve is 0. Its value at t=0 is infinity The area under the curve Its laplace transformmis 1.is 1. 87. Consider a series connection of R=2 Ohms, C-3F, a switch, and a voltage source, E=12 Volts. Assume that the capacitor is initially uncharged. If the switch is flipped on at t=0, what will be the charge on the capacitor immediately after the switched is closed? 5C 6C OC 1.5 C

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter29: Dc Generators

Section: Chapter Questions

Problem 5RQ: What are interpoles, and what is their purpose?

See similar textbooks

Similar questions

i need the answer quickly
Pb-7d.
What's the rise time for this system with its closed-loop poles as shown? 14 -6 -4 12 -j6 Select one: a. 0.607 sec b. 3.14 sec C. 1.80 sec d. 0.254 seC e. 0.554 sec
Please solve the problem
7. A coil having a resistance of 20 ohms and an inductance of 0.75 henry is connected in series with a 30-ohm resistor and to a 120-volt d-c source. A switch across the series resistor is then closed, and the circuit is assumed to be in a steady-state condition. At the instant the switch is opened, what will be the rate of current change and the power delivered by the magnetic field.
A coil that con sists of 450 windings is wound aroundabakelite ring. The mean diameter of the ring is 100 mm and the diameter of the bakelite core is 20 mm. The currentthrough the coil is 3 A. Determine: 1.1 a) the field stren gth b) the flux den sity c) the total flux A ringhas two halves. The onehalf is made from Cast iron, while the other is made from Cast steel. The two halves are held 1 mm apart with the aid of a paper disc. The cross-section al area and mean circumference of the ringis 345 mm? and0.6 m respectively. Therelative permeability of cast iron is 2400, while that of cast steel is 600. The ring has a coil with 200 win dings. The currentflow through the coil causes a flux den sity of 0.48T. 1.2 Calculate the: a) mmi b) currentflow Ignore the effects of fringing andleakage.
Choose the correct answer. *Please answer it ASAP if you can
A toroidal coil, with a circular cross-sectional area of 0.2m2. The coil inductance is 0.28H. The coil has 500 turns. How much current should flow in the coil to get a flux linkage of 498? a. 498.000 A b. 140.000 A c. 1778.571 A d. 249000.000 A e. 889285.714 A
In part 1 of this lab you will move a coil from well above to well below a strongpermanent magnet. You will measure the current in the loop during this motion using acurrent sensor. The program will also display the flux “measured” through the loop, eventhough this value is never directly measured. In this problem you will understand how.(a) Starting from Faraday’s Law and Ohm’s law, write an equation relating thecurrent in the loop to the time derivative of the flux through the loop.(b) Now integrate that expression to get the time dependence of the flux through theloop Φ(t) as a function of current I(t). What assumption must the software make (whatvalue must it arbitrarily set) before it can plot flux vs. time?
Please solve it step by step and each step explain to me, please
Show your detailed soln.
Pls show the complete neat solution Thank you.