6.4-2 Network- and Link-layer addressing: an end-to-end-scenario (1b). Consider the network shown below. The IP and MAC addresses are shown for hosts A, B, C and D,as well as for the router's interfaces. Consider an IP datagram being sent from node B to node D. Match the source/destination network- or link-layer address at the location (4)by choosing a value from the pulldown list. [Note: You can find more examplesproblems similar to this here.]49-FA-BO-3C-E2-70128.119.50.6068-01-BC-58-AF-24128.119.50.1074C-9D-AA-74-D6-1F128.119.240.5277-34-F1-EF-14-72128.119.97.18(1)(2)(5)72-9E-4A-31-9C-42128.119.240.15D5-A0-EE-9A-73-D5128.119.240.116CC-A5-81-OB-AE-33128.119.97.194What is the source MAC address on the frame at point (4)?1.128.119.50.60* What is the destination MAC address on the frame at point (4)?2.72-9E-4A-31-9C-42e What is the source IP address of the datagram at point (4)?3. 128.119,50.107-What is the destination IP address of the datagram at point (4)?4. 128.119.240.155. D5-A0-EE-9A-73-D56.49-FA-B0-3C-E2-7C7.68-01-BC-58-AF-248. 128.119,240,1169. The MAC address of the switch between points (4) and (5)

Here is the answer with an explanation:-

6.4-2 Network- and Link-layer addressing: an end-to-end-scenario (1b). Consider the network shown below. The IP and MAC addresses are shown for hosts A, B, C and D, as well as for the router's interfaces. Consider an IP datagram being sent from node B to node D. Match the source/destination network- or link-layer address at the location (4) by choosing a value from the pulldown list. [Note: You can find more examples of problems similar to this here.] 49-FA-BO-3C-E2-7C 128.119.50.60 4C-9D-AA-74-D6-1F 128.119.240.52 68-01-BC-58-AF-24 128.119,50.107 (6) 77-34-F1-EF-14-72 128.119.97.18 (3) (2) (5) (4) D5-AO-EE-9A-73-D5 128.119.240.116 72-9E-4A-31-9C-42 128.119.240.15 CC-A5-81-OB-AE-33 128.119,97.194 e What is the source MAC address on the frame at point (4)? 1. 128.119.50.60 What is the destination MAC address on the frame at point (4)? 2.72-9E-4A-31-9C-42 O What is the source IP address of the datagram at point (4)? e What is the destination IP address of the datagram at point (4)? 3. 128.119.50.107 4. 128.119.240.15 5. D5-A0-EE-9A-73-D5 6.49-FA-BO-3C-E2-7C 7.68-01-BC-58-AF-24 8. 128.119.240.116 9. The MAC address of the switch between points (4) and (5)

6.4-2 Network- and Link-layer addressing: an end-to-end-scenario (1b). Consider the network shown below. The IP and MAC addresses are shown for hosts A, B, C and D, as well as for the router's interfaces. Consider an IP datagram being sent from node B to node D. Match the source/destination network- or link-layer address at the location (4) by choosing a value from the pulldown list. [Note: You can find more examples of problems similar to this here.] 49-FA-BO-3C-E2-7C 128.119.50.60 4C-9D-AA-74-D6-1F 128.119.240.52 68-01-BC-58-AF-24 128.119,50.107 (6) 77-34-F1-EF-14-72 128.119.97.18 (3) (2) (5) (4) D5-AO-EE-9A-73-D5 128.119.240.116 72-9E-4A-31-9C-42 128.119.240.15 CC-A5-81-OB-AE-33 128.119,97.194 e What is the source MAC address on the frame at point (4)? 1. 128.119.50.60 What is the destination MAC address on the frame at point (4)? 2.72-9E-4A-31-9C-42 O What is the source IP address of the datagram at point (4)? e What is the destination IP address of the datagram at point (4)? 3. 128.119.50.107 4. 128.119.240.15 5. D5-A0-EE-9A-73-D5 6.49-FA-BO-3C-E2-7C 7.68-01-BC-58-AF-24 8. 128.119.240.116 9. The MAC address of the switch between points (4) and (5)

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Related questions

Q: 1.4-6 Maximum end-end throughput (e). Consider the scenario below where 4 TCP senders are connected…

A: Given data : R = 1Gbps Rc = 300 Mbps Rs = 200 Mbps

Q: The figure shows a TCP transaction. Assume Host A always has data to send, and each packet has size…

A: A) Here since 2nd packet is lost, ACK#1 = ACK#2 = ACK#3 =100 (sequence number of 2nd packet)…

Q: 1.4-6 Maximum end-end throughput (e). Consider the scenario below where 4 TCP senders are connected…

A: The amount of data that is transferred from source to destination in a predetermined amount of time…

Q: Consider the datagrams of each layer in the TCP/IP model, e.g., Frame at the Link Layer, Packet at…

A: Note: As you have asked a multipart question, as per our policy, we will solve the first three parts…

Q: 6.4-11 Network- and Link-layer addressing: an end-to-end-scenario (3b). Consider the network shown…

A: A Media Access Control (MAC) address can be defined in such a way that it is a completely unique…

Q: Problem 3 Consider the problem of deciding whether to implement a virtual- circuit or a datagram…

A: Answer: a) packets arrive periodically= L/R L-packet size R- rate. 256/9600=0.026. b) The…

Q: For NAT Network Address Translation Scenario: Jenny Bello is a small business owner selling and…

A: We need to answer questions related to private IPv4 address.

Q: Consider the following design problem concerning implementation of virtual-circuit service. If…

A: The correct answer for the above mentioned question is given in the following steps for your…

Q: 2. Subnetting a subnet or using variable-length subnet mask (VLSM) was designed to maximize…

A: Subnetting is a process of dividing the large network into small subnetworks. Because of subnetting,…

Q: P9 Consider Figure 2.12, for which there is an institutional network connected to the Internet.…

A: In this question we have to calculate the total average response time for a network scenario…

Q: Referring to Diagram 1, Can Computer A send a Packet to Computer X? Select one: O a. Yes O b. No,…

A: Network subnetting means divinding a network into smaller networks. Those smaller networks inside…

Q: Software developers Please help me sort t

A: I'm sorry, but I cannot sort the models by your life experiences as I do not have access to…

Q: Show the difference between them by listing the input and output of mapping for a forwarding table…

A: Listing input and output of mapping In the diagrams, both the forwarding table and Address…

Q: Assume the network uses packet switching and 2 Kilobyte packets. Assume both L1 and L2 each have a…

A: The time required to send a 100 Kilobyte file from Node A to Node B depends on the speed of…

Q: c. Complete, by inspection, the following routing table for machine D, (where 1.* means all machines…

A: Ans a). Machine D sends packet to machine G as they both are connected to same network, so packetsa…

Q: A common protocol stack used by many applications is to use TCP at the transport layer and IP at the…

A: Step 1:- Introduction:- TCP stands for a connection-oriented protocol. In this, if the sender wants…

Q: ii)Detail the four abstraction layers that make up TCP/IP. ii) Provide a scenario in which two…

A: Four Abstractions Layers of TCP/IP 1. Link Layer 2. Internet Layer 3. Transport Layer 4.…

Question

6.4-2 Network- and Link-layer addressing: an end-to-end-scenario (1b). Consider the network shown below. The IP and MAC addresses are shown for hosts A, B, C and D,
as well as for the router's interfaces. Consider an IP datagram being sent from node B to node D. Match the source/destination network- or link-layer address at the location (4)
by choosing a value from the pulldown list. [Note: You can find more examples
problems similar to this here.]
49-FA-BO-3C-E2-70
128.119.50.60
68-01-BC-58-AF-24
128.119.50.107
4C-9D-AA-74-D6-1F
128.119.240.52
77-34-F1-EF-14-72
128.119.97.18
(1)
(2)
(5)
72-9E-4A-31-9C-42
128.119.240.15
D5-A0-EE-9A-73-D5
128.119.240.116
CC-A5-81-OB-AE-33
128.119.97.194
What is the source MAC address on the frame at point (4)?
1.128.119.50.60
* What is the destination MAC address on the frame at point (4)?
2.72-9E-4A-31-9C-42
e What is the source IP address of the datagram at point (4)?
3. 128.119,50.107
-
What is the destination IP address of the datagram at point (4)?
4. 128.119.240.15
5. D5-A0-EE-9A-73-D5
6.49-FA-B0-3C-E2-7C
7.68-01-BC-58-AF-24
8. 128.119,240,116
9. The MAC address of the switch between points (4) and (5)

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, computer-science and related others by exploring similar questions and additional content below.

Similar questions

Provide an overview of the four abstraction layers that make up TCP/IP. ii) Speculate on a scenario where two computers are transferring a video file via an unencrypted ftp connection using a weak TCP three-way handshake.
Consider the datagrams of each layer in the TCP/IP model, e.g., Frame at the Link Layer, Packet at the Internet Layer. Explain the functioning of the following protocols based on their datagram header fields only. Note: You do not need to describe the header field but based on the header field, explain how the protocol works, e.g., Acknowledgement field in a TCP Header is responsible for providing reliable data transfer and in case of data loss or ACK not received, segment is re-sent. You do not need to consider every field of the headers but wherever there are more than 4 fields, then based on 5 fields, describe its functioning, if less than or equal to 4 fields then consider all the fields. Ethernet Frame 11 Frame IPv4 Packet IPv6 Packet TCP Segment UDP Segment HTTP
Discrete Mathematic Question: Pretend we are defining a new class of networks: 1 byte for network IDs and 1 byte for hostID. The definition of class A is: networkdID is : 0xxx-xxxx and the one byte (8 bits) hostID cannot contain all 0s and 1s. The definition of class B is: networkdID is : 10xx-xxxx and the one byte (8 bits) hostID cannot contain all 0s and 1s The definition of class C is: networkdID is : 110x-xxxx and the one byte (8 bits) hostID cannot contain all 0s and 1s. How many total IP addresses can we have with the above definition?
Consider an Infrastructure BSS with an Access Point and two Mobile Stations, and let’s use AP, M1, and M2 to denote their MAC addresses. Both M1 and M2 are associated with the AP. Suppose M1 wants to send a data frame to M2. When this data frame is relayed by the AP, explain how the AP shall update the four address fields of the data frame.
2. For each of the following, write the ONE correct answer. a) TCP/IP layers are Internet (I), Transport (T), Application (A), Physical (P), Network Interface (N). Which layer deals with modulation in WiFi networks? The layer whose header contains the source MAC address is Answer= Answer= b) The leftmost and rightmost bits in a byte are MSbit and LSbit respectively. For the 2 bytes 10000000 00000001, assume that the first byte is MSbyte and the second byte is LSByte. Assuming that bits are transmitted from left to right, write the transmission order that is bit big endian and byte little endian: Answer= c) Let TP=unshielded twisted pair, CC=coaxial cable, F=fiber, L=lasercommunication. Which of these media Uses a shield for limiting interference Achieves the highest bandwidth across long distances Answer= Answer= d) Of FDMA, CDMA, TDMA and SM (statistical multiplexing), which method is multiplexing primarily based on in LTE networks? Answer= e) Which particular form of FDM is used over…
Please complete this program in C++ Please enusre that there is plenty of comments. PLENTY even if unessessary. Please include screenshots of actual code, screenshots of output, and code in the browser so I can copy and paste. Thank you.
ii)Detail the four abstraction layers that make up TCP/IP. ii) Provide a scenario in which two computers share a video file via an unencrypted ftp connection using a weak TCP three-way handshake.
A protocol stack used by many applications is to use TCP at the transport layer and IP at the network layer. The ICMP protocol is also used to report on problems encountered by IP. A) The IP protocol provides a service referred to as "best effort". Describe the services of IP and potentially ICMP protocol, with respect to flow control( ensuring the sender does not overwhelm the receiver). B) Describe the services TCP provides with respect to flow control and explain the mechanisms it uses to overcome the deficiencies of IP.
ii)Detail the four abstraction layers that make up TCP/IP. ii) Provide a scenario in which two computers share a video file via an unencrypted ftp connection using a weak TCP three-way handshake.
Networking & Data Communcations
ii)Detail the four abstraction layers that make up TCP/IP. ii) Provide a scenario in which two computers share a video file via an unencrypted ftp connection using a weak TCP three-way handshake.
ii)Detail the four abstraction layers that make up TCP/IP. ii) Provide a scenario in which two computers share a video file via an unencrypted ftp connection using a weak TCP three-way handshake.