6. Figure 4 shows a segment gate of semicircular cross section which is 10 ft long and 8 ft in diameter. Water stands at a depth of 8 ft on the left-hand side and 4 ft on the right-hand side. Determine both the magnitude and the direction of the total (net) bydrostatic force on the gate. బ

6. Figure 4 shows a segment gate of semicircular cross section which is 10 ft long and 8 ft in diameter. Water stands at a depth of 8 ft on the left-hand side and 4 ft on the right-hand side. Determine both the magnitude and the direction of the total (net) bydrostatic force on the gate. బ

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Please help me with thise one
Water 10m Air pressure = 40 kPa eg o- Fair persare 5m • eg Sm hinge support 13. Calculate the horizontal reaction at the hinge. a. 680.48 kN b. 677.29 kN c. 640.59 kN d. 659.24 kN 14. Obtain the location of the total hydrostatic force from the bottom of the gate. Denote as "x" a. 2.375 m b. 2.030 m c. 2.292 m d. 2.044 m 15. Determine the location of the hinge support (measured from the bottom) to hold the gate in position. Denoted as "z" a. 2.375 m b. 2.030 m c. 2.292 m d. 2.044 m
A water tank, 22 ft in diameter, is made from steel plates that are ½ inch thick. Find the maximum height to whichthe tank may be designed if the stress of the wall is limited to 1 ksi. Assume that the pressuredistribution varies linearly.
2
Question 01. For the concrete gravity wall shown below: a. Determine the magnitude, direction, and sense of the resultant force./ b. Determine where the resultant intersects the base of the wall with respect to point A (horizontally)./ 2 m 70 kN 1 m 6 m 53 kN 21.0 kN 2 m 1 m 4.5 m
2. A circular gate 1.5 m in diameter is inclined at an angle of 45 deg. Fresh water stands on one side of the gate to a height of 10 m above the center of the gate. The gate is hinged at the top, compute the required force normal to the gate at the bottom that will require to open it in KN 10 m AK 1.5 m
Draw shear diagram .please explain it
A vertical rectangular gate is 1.5m wide and 3m high. The top of the gate is 2m below the water surface. Solve the distance of the resultant hydrostatic force from the center of gravity of the gate. 0.125m 0.214m O 0.182m 0.256m
4.2m SCHAIN A CHINGE) GATE c.g. 2600 1m The 1 meter diameter gate shown weighs 450N and is hinged at "A" and can be opened by force "T" thru the chain weighing 60N. The center of gravity of the valve 4.2m below the water surface and the dam is inclined by 600 from the horizontal. Determine the force "T" required to open the gate. (Notes: Hydrostatic force "F" is always perpendicular to the plane surface) (A) 30.56 KN B No answer among the choices 33.49 KN D) 39.67 KN (E) 36.24 KN
Situation 11. A rectangular vertical gate, 0.60 m wide and 2.45 m high and weighing 1.78 kN, is hinged at the bottom. There is water on both sides of the gate, 4.9 m on one side and 1.80 m on the other. The gate, however, is held in place by a horizontal force F applied at the top of the gate. Under the above conditions, determine the horizontal force F and the amount and direction of the reaction at the hinge. Assume weight of water to be 9.81 kN/cu.m. 0.60 m 2.45 m 2.45 m W.S. BA 1.78 kN P₁ hinge F water surface -P₂ 1.80 m
Nilo .p