6. Diffusivity. the diffusivity of volatile solvents is frequently measured using an Arnold cell. Here, a vertical glass tube 10 cm in length with a surface area (S =1 cm²) is filled to the top with dichloromethane and placed at 24°C and standard atmospheric pressure while dry air is blown over the top. The entire column of dichloromethane takes 12 hrs to evaporate. a) b) c) What is the diffusion coefficient of dichloromethane in air under these conditions? Useful info: the vapor pressure of dichloromethane at 24°C is 400 mmHg (53.3kN/m²), MW=84.9 g/mol, pa = 1.33g/cm³. Would the results in part (a) change if the tube had a larger cross-sectional surface area? Explain. Based on your results in part (a), what would be the diffusivity of dichloromethane be in air at 50°C?

Q: Calculate the r/min required for finish turning

A:

Q: In an orthogonal cutting operation an 8 mm deep groove is to be turned on a 50 mm diameter steel…

A:

Q: A cutting tool (0.250 in wide, rake angle 5°) is used to machine in orthogonal mode at 0.010 inch…

A:

Q: If a fairing operation is executed at a rotational speed of 40.0 rev / min, the feed is 0.015 in /…

A: As the outer and inner diameter is not given so I am assuming it as D0 and Direspectivelya)…

Q: A cylindrical work part 200 mm in diameter and 700mm long is to be turned in an engine lathe.…

A: Given:D=200 mmL=700 mmV=2.3 m/sf=0.32 mm/revd=1.8 mm

Q: A slab milling operation is performed to finish the top surface of a steel workpiece 250*75 mm*mm.…

A:

Q: ......... is used in automatic machining system where a tool is activated when the presence of work…

A:

Layout

The layout is a way of organizing the elements, products, and raw materials in a design. The layout is the representation of information in a structural, logical, descriptive, coherent form.The layout is a mapping of various equipment arrangements, workstations, machinery, plants, and more. It secures the continuous movement of a product quantity along with the quality.