6. A simply supported beam with a span of 6 m whose cross section shown in fig. (6). Calculate the instantaneous mid-span deflection if the beam is used to support a uniformly distributed dead load (including self-weight) of 30 kN/m, and uniformly distributed live load of 40 kN/m. Given: f =21 MPa, and f,=350 MPa, and n = 9. 150 150 150

6. A simply supported beam with a span of 6 m whose cross section shown in fig. (6). Calculate the instantaneous mid-span deflection if the beam is used to support a uniformly distributed dead load (including self-weight) of 30 kN/m, and uniformly distributed live load of 40 kN/m. Given: f =21 MPa, and f,=350 MPa, and n = 9. 150 150 150

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

SOLVE THIS USING CBM. THANK YOU. The roof beam of a building is subjected to the loading shown. If a 3/8-in. deflection is permitted at the cantilever end before the ceiling & roofing materials would be damaged, determine the required moment of inertia for the beam. Use E = 29,000 ksi. 24 kips 0.72 kip/ft 0.48 kip/ft B
For the beam loaded shown below, evaluate the following: Moment Diagram of the Beam Using Conjugate Beam Method, determine the Rotation at C and Deflection at C assuming El is constant throughout the beam. 12 kN/m ... 20 kN A C 6 m 2 m
A simple supported beam made up of a material with the density of 2400kg/m3 has a rectangular cross section of 200mm x 450mm. In addition to the self weight, the beam is subjected at 2/3rd of the span (from left hand) with a point load of P kN. Find out the maximum deflection and slope if the span length of the beam is 3.5 m. (Where P is equal to 55). Consider the self weight of the beam in solving the question.
Q/ An overhanging beam is subjected to the combined loading shown in Figure below. Determine the slope at support 4 and the deflection at C. 50 KN 25 kN/m 50 kN C D m www 5m 5m 4 m
Determine the slope and deflection at point B of the beam shown if the figure. Let e= 29 106 ??? and i= 800??4
Q1: for the beam loaded as shown, if E-200 GPa, I=39*10 mm, using double integration method, compute: 1. Deflection equation. 2. Maximum deflection 3. The slop at the right support. 15 kN/m 20 kN -1.5 m- 3m B
Consider a 3 metre long uniform beam with flexural rigidity of 100 kNm². The beam is supported with a fixed (clamped) support on the left, and a roller support 1 metre from the right hand side. 3m 2m A 1kN/m point load is applied 1 metre from the left hand side. If we find the deflection for this beam, using the boundary conditions for the fixed (clamped) end and for the roller support, we get the equation. y(z) 9600 ((16³-48x² +48r - 16) H(r− 1) - 112³ +18r²) (you do not need to calculate this yourself, but you may verify it if you wish) Have Desmos (or any other computer graphing system you like) draw a picture of the beam under load. Make sure the picture is accurate, and is zoomed appropriately to see the actual bends in the curve. What is wrong with the deflection function to the right of the roller support? b) Solve the deflection for this beam in two parts, as if there were two separate beams: 3m Om 2m 2m For the roller support use the following boundary conditions: y (2)= 0 and…
A beam is loaded as show in the figure. Using Moment-Area Method determine the following: a. Slope at A b. Location of the maximum deflection c. Maximum deflection A 1.70 kN/m 3m Use E = 10 GPa and I = 30 x 10 mm B 1.51 -2m 2.40 kN/m
6. A simply supported beam with a span of 6 m whose cross section shown in fig. (6). Calculate the instantaneous mid-span deflection if the beam is used to support a uniformly distributed dead load (including self-weight) of 30 kN/m, and uniformly distributed live load of 40 kN/m. Given: f =21 MPa, and f,=350 MPa, and n = 9. 150 150 150 50 ppening/ 150 629 400 6#29 bars 100 Fig. (6) All dimensions in mm
Determine the location and magnitude of the maximum absolute deflection in AB between A and the center of the beam. (b) Assuming that beam AB is a W460 *113 rolled shape, M0 = 224 kN·m, and E = 200 GPa, determine the maximum allowable length L so that the maximum deflection does not exceed 1.2 mm.
For the beam and loading shown, use discontinuity functions to compute: (a) the deflection VA of the beam at A, and (b) the deflection vmidspan of the beam at midspan (i.e., x = 2.4 m). Assume a constant value of EI = 1660 kN-m2 for the beam; MA = 9.3 kN-m, Wo = 19.5 kN/m, LAB = 1.1 m, LBC = 2.6 m. wo MA |A B LAB LBC Answer: (a) VA = mm. mm. (b) Vmid =
For the beam and loading shown, use discontinuity functions to compute: (a) the deflection vA of the beam at A, and (b) the deflection vmidspan of the beam at midspan (i.e., x = 3.2 m). Assume a constant value of El = 1750 kN-m2 for the beam; MA = 9 kN-m, wo = 20.4 kN/m, LAB = 1.4 m, LBc = 3.6 m. Wo MA B LAB LBC Answer: (a) Va = mm. (b) Vmid mm. %D