6- 6-A turbine receive steam at 1.38 bar, 0.143 m²/kg internal energy 2590 kJ/kg and 30 m/s. At leaving the condenser are 0.35 bar, 4.37 m²/kg, internal energy 2360 kJ/kg and 90 m/s. Heat is lost to the surroundings at 0.25 kJ/s. If the rate of steam flow is 0.38 kg/s. What is the power developed by the turbine? (102.8kW)

6- 6-A turbine receive steam at 1.38 bar, 0.143 m²/kg internal energy 2590 kJ/kg and 30 m/s. At leaving the condenser are 0.35 bar, 4.37 m²/kg, internal energy 2360 kJ/kg and 90 m/s. Heat is lost to the surroundings at 0.25 kJ/s. If the rate of steam flow is 0.38 kg/s. What is the power developed by the turbine? (102.8kW)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

2. A surface condenser serving a 50,000-kW steam-turbo generator unit receives exhaust steam at the rate of 200,000 kg/hr. Vacuum in condenser is 0.88025 bar. Sea water for cooling enters at 27°C and leaves at 40°C. For steam turbine condenser as heat given up to cooling water. Calculate the LMTD.
Steam expands in a turbine from 5 MPa and 500°C to 0.6 MPa and 300°C at a rate of 1360 kg/h. Heat is lost from the turbine at a rate of 27 kJ/s during the process. The power output of the turbine is a. 295 KW b. 114 KW c. 109 KW d. None of these e. 157 KW f. 245 KW
4.) Steam with a flow rate of 3000 Ilb„/hr enters an adiabatic nozzle at 200 psia, 600 ft/min, with a specific volume of 2.36 ft’/lbm, and a specific internal energy of 122.7 Btu/lbm. The exit conditions are p = 20 psia, specific volume = 17.6 ft’/lbm, and internal energy = 973 Btu/lbm. Determine the exit velocity.
Q3. Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.20 MPa and -5 C at a rate of 0.07 kg/s, and it leaves at 1.2 MPa and 70 C. The refrigerant is cooled in the condenser to 44 C and 1.15 MPa, and it is throttled to 0.21 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor, (b) the isentropic efficiency of the compressor, and (c) the COP of the refrigerator. Solve this question using both tables and P-h chart.
Q4/ A particular power plant operates with a heat source reservoir at 350 °C and a heat sink reservoir at 30 °C. It has a thermal efficiency equal to 55% of the Carnot engine therma' efficiency for the same temperatures. 1. What is the thermal efficiency of the plant? 2. To what temperature must the heat source reservoir be raised to increase the thermal efficiency of the plant to 35%?
f. A water-jacketed compressor receives 140 L/s air at 100 kPa and 21 deg C and discharges the air at 140 deg C. Cooling water entering at 16 deg C and leaving at 21 deg C is circulated at the rate of 0.18 L/s. Determine the power required for the driving motor for this compressor, assuming the friction losses with rotating parts account to 5% of the total power required. a. 10 kW b. 15 kW c. 20 kW d. 25 kW
A power plant operates in an idealized Rankine cycle, using water as the working fluid (Figure 3). The steam at the exit of the boiler has a pressure of 6 MPa and temperature of 600 °C (point 1). The water at the exit of the condenser has a pressure of 15 kPa (point 3). The condenser employs a nearby river as the cooling source, which can be regarded to have a constant temperature of 25 °C. The mass flow rate of the steam is 80 kg/s. The hot reservoir has a temperature of 1400 K. Regard water as an incompressible liquid. During pumping, the density of water remains unchanged as Point 3 in Figure 3. Qin Boiler i wwwwww Pump Turbine Wp 3 Figure 3 W₁ Cooling water Condenser
Que: The temperature in the evaporator of a home air conditioner using R134A as the refrigerant is 261 K, and the temperature in the condenser is 325 K. The refrigerant leaves the evaporator at 12 K above saturation temperature and its mass flow rate is 22 kg/h. When a compressor with 80% efficiency is used; a) The power of the compressor (kW), b) the cooling capacity of the air conditioner (kW), and c) Find the coefficient of performance. 3. 325 4, 261 Qu 2.
Q5. A simple vapour compression refrigeration system of 60 kW cooling capacity that uses a water-cooled condenser. The power required by the compressor is 10 kW. The overall heat transfer coefficient of the condenser is 350 W/m².K and a heat transfer area of 17 m². If cooling water at a flow rate of 3.5 kg/s enters the condenser at a temperature of 31°C, what is the condensing temperature? Take the specific heat of water as 4.18kJ/kg.K. (20 Marka)
A steam power-plant, with a power of "Wnet", is working according to the Rankine cycle. Steam enters the system in "P3"MPa pressure and 500 C degree temperature, and cooled down in condenser at 10 kPa pressure. Take Source temperature as "TH", and sink temperature 290 K. According to the information given. P3 = 6 MPa, %3D Wnet = 201 MW, TH = 1600 K Determine: 1.Heat generated (MW)(Not Heat given) 2.Pump entrophy generation (MW/K) 3.Combustion chamber entrophy generation (MW/K) 4.Turbine entrophy generation (MW/K)
An air conditioner using refrigerant 134a as work fluid It is used to keep the temperature of a room at 23 ° C by giving heat to the environment. The house from the walls and heat gain from windows is 250 kJ / min ; 900 W of heat from computer, TV and lamps to the room spreads. The refrigerant is 100 L / min in the form of saturated vapor at 400 kPa pressure to the compressor entering with flow and it left from the compressor 1200 kPa pressure and 70 ° C. a) real COP value b) max COP value c) Calculate the min volumetric flow rate for the refrigerant can have for the same compressor inlet and outlet conditions
Steam at 20 bar and 3000C is supplied to a turbine in a cycle and is bled at 4 bar. The bled-steam just comes out saturated. This steam heats water in an open heater to its saturation state. The rest of the steam in the turbine expands to a condenser pressure of 0.1 bar. Assuming the turbine efficiency to be the same before and after bleeding, find: a) the turbine efficiency and the steam quality at the exit of the last stage; b) the mass flow rate of bled steam 1kg of steam flow at the turbine inlet; c) power output / (kg/s) of steam flow; and d) overall cycle efficiency.