Answered: 4. A businessman from Zimbabwe buys a… | bartleby

Related questions

Question

4. A businessman from Zimbabwe buys a transformer so that he can use his own electric
appliances on a trip to the United States. The input coil has 60 turns while the output coil
has 110 turns. Assuming the input voltage is 120 volts, what is the output voltage
necessary for his appliances to work properly? (This is the standard household output
voltage in Zimbabwe.)

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

7. An inductor and a resistor are connected in series to a battery as shown in the figure below, where V0 = 15 V, L = 3 H and R = 7Ω. What is (i) the maximum current in the circuit and (ii) the maximum energy stored in the inductor?
The primary coil of a transformer has 100 loops and is connected to a circuit with 120 volts (primary voltage). What is the output voltage (secondary voltage) if the secondary coil has 50 loops?
From the diagram, the primary voltage is Vp = 2.10 V and the secondary voltage is Vs = 41.2 V Based on the given voltmeter readings, the number of turns and current through the primary and secondary coil can be found. The relationship is given below N subscript s over N subscript p equals V subscript s over V subscript p equals I subscript p over I subscript . How do they know which voltmeter measures primary voltage and which one measures secondary voltage?
15. A power generator produces 2.00 kA of current at 500 V. Electric power must be transmitted with 1.00% loss in transmission lines of 95.00 total resistance. To achieve this, the voltage is stepped up by a transformer with 32 turns in its primary coil. a. How much voltage is carried by the transmission lines? b. How many turns are in the transformer's secondary coil?
2. An AC generator has 75 rectangular loops on its armature. Each loop is 14.0 cm long and 10.0 cm wide. The armature rotates at 1300 rpm about an axis parallel to the long side. If the loop rotates in a uniform magnetic field of 0.700 T, which is perpendicular to the axis of rotation, what will be the maximum output voltage of this generator? Volts
A plug-in transformer supplies 9.00 V to a video game system. (a) How many turns are in its secondary coil if its input voltage is 120 V and the primary coil has 423 turns? turns(b) What is its input current when its output is 1.33 A? A
The transformer on a utility pole steps the voltage down from 10000 V to 220 V for use in a college science building. During the day, the transformer delivers electric energy at the rate of 10.0 kW. a) Assuming the transformer to be ideal, during that time, what are the primary and secondary currents in the transformer? b) If the transformer is only 90 % efficient (but still delivers electric power at 10.0 kW), how does its input current compare to the ideal case? c) At what rate is heat lost in the nonideal transformer? d) If you wanted to keep the transformer cool and to do this needed to dissipate half of the joule heating of part c) using water cooling lines (the other half is taken care of by air cooling), what should be the rate of flow (in liters per minute) of water in the lines? Assume the input cool water is at 68∘∘F and the maximum allowable output water temperature is 98∘∘F} .
1. An AC generator has 85 rectangular loops on its armature. Each loop is 11 cm long and 8 cm wide. The armature rotates at 1500 rpm about an axis parallel to the long side. If the loop rotates in a uniform magnetic field of 0.8 T, which is perpendicular to the axis of rotation, what will be the maximum output voltage of this generator? Volts