4) A long solenoid has n=1000 turns per meter and a current I = 5 sin(wt). Inside the solenoid with a= 0.5 m and coaxial with it is a coil that has a radius of b = 0.2 m and consists of Nc = 300 turns in Figure. Circuit has a variable resistor, and at t=2 s resistor has 2 Q. (a) Find the induced emf in the coil as a function of time if f=10 Hz. (b) Find the self-inductance of solenoid. (c) Find the current Irms of the circuit. (d) Write the expressions for E and B generated by solenoid in the form E = 5 sin(kx – wt) and B = Bmax sin(kx – wt) with numerical values for Bmaxs k, and w when the wavelength 2 150 m, and the periot T=3 s. (µo = 4n × 10-7 T. m/A, c = 3 × 10® m/s) %3D %3D Coil, No turns with radius b = 0.2 m Solenoid, n turns per meter ja I = 5 sin(wt) I = 5 sin(wt) V = 10 sin(wt) Variable resistor

4) A long solenoid has n=1000 turns per meter and a current I = 5 sin(wt). Inside the solenoid with a= 0.5 m and coaxial with it is a coil that has a radius of b = 0.2 m and consists of Nc = 300 turns in Figure. Circuit has a variable resistor, and at t=2 s resistor has 2 Q. (a) Find the induced emf in the coil as a function of time if f=10 Hz. (b) Find the self-inductance of solenoid. (c) Find the current Irms of the circuit. (d) Write the expressions for E and B generated by solenoid in the form E = 5 sin(kx – wt) and B = Bmax sin(kx – wt) with numerical values for Bmaxs k, and w when the wavelength 2 150 m, and the periot T=3 s. (µo = 4n × 10-7 T. m/A, c = 3 × 10® m/s) %3D %3D Coil, No turns with radius b = 0.2 m Solenoid, n turns per meter ja I = 5 sin(wt) I = 5 sin(wt) V = 10 sin(wt) Variable resistor

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Related questions

Q: The current in a coil changes steadily from 1.3 A to 2.5 A in the opposite direction, in 0.12 s. The…

Q: The switch S is open for a long time and then closed at t = 0. a) Find the current in the inductor…

Q: In the figure, a 150-turn coil of radius 1.9 cm and resistance 5.90 is coaxial with a solenoid of…

Q: Two coils, 1 and 2, are separated in space, and have a fixed distance between them. When coil 2 has…

A: Given the emf in the second coil ε2 = 30 mV = 30×10-3 V The rate of change of current in the first…

Q: A flexible loop has a radius of 12.0 cm and is in a magnetic field of magnitude 0.150 T. The loop is…

A: Given data The radius of the flexible loop is: R = 12 cm = 0.12 m The magnitude of the magnetic…

Q: . A large research solenoid has a self-inductance of 20.0 H. What induced emf (in V) opposes…

A: Inductance of an inductor L = 20.0 H Current passed through…

Q: A generator rotates its 200 turn, d = 0.19 m diameter coil at f = 3400 rpm in a B = 0.75 T field.…

A: The objective of the question is to calculate the peak voltage of a generator given the number of…

Q: A long solenoid has n = 380 turns per meter and carries a current given by I = 31.0(1 – e-1.60t ),…

Q: Plz don't use chat gpt plz

A: Thank you,Please rate my response.

Q: An "infinite" solenoid has 968 turns/m and circular cross section of radius 15.3 m. A small circular…

A: According to Faraday's law of electromagnetic induction The induced emf through a coil is given by…

Q: In the figure, a 110-turn coil of radius 2.10 cm and resistance 6.80 N is coaxial with a solenoid of…

A: Number of turns , N = 110 Radius , r = 2.1 cm = 0.021 m Resistance , R = 6.8 Ω Number of turns per…

Q: a) Calculate the self-inductance (in mH) of a 49.0 cm long, 10.0 cm diameter solenoid having 1000…

A: Length of the solenoid () = 49.0 cm = 0.49 mDiameter of the solenoid () = 10.0 cm = 0.1 mNumber of…

Q: Two coils close to each other have a mutual inductance of 29 mH. The current in one coil decays…

A: Given :- L = 29 mH I = I0 e-αt Io = 6A α = 1.5 * 10^3 s-

Q: The self-inductance of the circuit in the figure below is 1.10 x 10-7H. Find the back emf when the…

A: Given: The inductance of the circuit is 1.1x10-7 H. The rate of current increasing at the rate of…

Q: 4) A long solenoid has n=1000 turns per meter and a current I = 5 sin(wt). Inside the solenoid with…

A: Given: n = 1000 turns per meter; I = 5 sin(wt) a = 0.5 m; b= 0.2 m; Nc = 300 turns; t = 2s; R = 2…

Q: A coil of 15 turns and radius 10.0cm surrounds a long radius of 1.90 cm and 1.00*10^3 turns/meter.…

A: Induced emf ε=-Ndϕdt=-NddtBA=-Nddtμ0nIA=-Nμ0nAdIdt=-Nμ0nAddt7.00sin120t=-154π×10-7 Hm1.00×103…

Q: As the coil of wire in the generator spins, an output potential difference is induced. Explain how…

A: Given that As the coil of wire in the generator spins, an output potential difference is induced. To…

Q: a) Calculate the self-inductance (in mH) of a 54.0 cm long, 10.0 cm diameter solenoid having 1000…

A: Length of the solenoid () = 54.0 cm = 0.54 mDiameter of the solenoid () = 10.0 cm = 0.1 mNumber of…

Q: A 150 turn coil of radius 2.0 cm and resistance 5.5 Q is coaxial with a solenoid of 220 turns/cm and…

A: Solenoid.

Q: An inductor in the form of a solenoid contains 430 turns and is 17.4 cm in length. A uniform rate of…

Q: The magnetic flux through a coil is 2.50 mWb. The current in the coil is 1.00 A and has 100 turns…

Concept explainers

Voltage Across Inductor

An actor is a passive electrical component that consists of a coil bent in the form of wire which uses electromagnetism to produce electric current through the coil. When the electric current flows through a conductor that is the coil, a magnetic flux is developed around the conductor. This flow of current through the coil creates a magnetic field based on Fleming's Right-hand thumb rule. If there is any decrease in the current passing through the inductor, then the magnetic field will also decrease and energy is released through the generation of electric current. There is also a secondary voltage inducing in the same coil due to the magnetic flux, since it opposes any changes in the electric current flowing through the circuit. An inductor is also called choke, coil, or solenoid. A choke is designed to block certain frequencies when the DC current passes. A winding coil is coated with insulation to give extra insulation and protect the circuit. They are usually tightly wrapped around a central core which is cylindrical in nature so that the magnetic flux can be induced. The solenoid is a three-dimension coil that is used to exhibit electromagnetism when the magnetic field is developed due to the current flowing through the coil. The sign convention of the inductor is the same as the power dissipating device. When the current flows into the positive side of the voltage across the inductor, the value is positive and the inductor dissipates power whereas when the inductor releases the power back to the circuit, the current has a negative sign convention. 

Question

4) A long solenoid has n=1000 turns per meter and a current I = 5 sin(wt). Inside the solenoid
with a= 0.5 m and coaxial with it is a coil that has a radius of b = 0.2 m and consists of N. = 300
turns in Figure. Circuit has a variable resistor, and at t=2 s resistor has 2 Q.
(a) Find the induced emf in the coil as a function of time if f=10 Hz.
(b) Find the self-inductance of solenoid.
(c) Find the current Irms of the circuit.
(d) Write the expressions for E and B generated by solenoid in the form E = 5 sin(kx – wt) and
B = Bmax sin(kx – wt) with numerical values for B, k, and w when the wavelength 2
150 m, and the periot T=3 s. (H.
max
= 4n × 10-7 T. m/A, c = 3 × 108 m/s)
Coil, No turns with radius b = 0.2 m
Solenoid, n turns per meter
I = 5 sin(wt)
I = 5 sin(wt)
V = 10 sin(wt)
2 Ω
Variable resistor

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A 365 pF capacitor is charged to 115 V and then quickly connected to a 225 mH inductor. Determine the frequency of oscillation. Determine the peak value of the current. Determine the maximum energy stored in the magnetic field of the inductor.
In the figure below the switch S is closed, Supppose the emf of the ideal battery is 12.0 V, the inductance of the ideal inductor L = 30.0 mH, and the resistance R2 = 4.34 ohms and the resistance R2 = 2.17 ohms. When i = 0.17 A 1. how much energy is delivered by the battery? 2. how much of this energy is stored in the magnetic field of the inductor? 3. how much of this energy is dissipated by both resistors? 4. what is the rate dibat/dt at t = 0, t = 0.82 s and t after a long time?
In the figure, a 140-turn coil of radius 3.3 cm and resistance 6.9 Q is coaxial with a solenoid of 240 turns/cm and diameter 4.1 cm. The solenoid current drops from 1.7 A to zero in time interval At = 28 ms. What current is induced in amperes in the coil during At? Coil Solenoid Number i Units
In a well-designed transformer with an iron core, the secondary coil has twice as many turns as the primary coil. Which one of the followi statements concerning this transformer is true? OA This is a step-down transformer because the current in the secondary coil is less than that in the primary coll. OB The effect of the iron core is to reduce the magnetic field passing through the coils. C The induced emf generated in the secondary coil is twice as large as that generated in the primary coil. 9:44 PM O D. The flux that passes through each turn of the primary coil is twice the flux that passes through the secondary coil.
A toroidal solenoid has 800 turns, cross-sectional area of 16.25 cm^2, and an average radius of 14.00 cm.a) Calculate the self-inductance of the coil.b) If the current decreases uniformly from 15.00 A to 12.00 A In 3.00 ms, calculate the self-induced electromotive force in the coil.c) Current is directed from terminal a of the coil to terminal b. Is the direction of the induced electromotive force from a to b, or from b to a? Why?
A solenoid inductor is 4.0 cm long and has a cross sectional area of 1.2 cm2. When the current through thesolenoid decreases at a rate of 12 A/s, the induced emf is 20 mV. Find the number of turns of the solenoid. A) 1330B) 3324C) 230D) 665E) 2561
Remove the inductor from the circuit in the figure and set R = 216 Q, C = 18.6 µF, fd = 60.0 Hz, and &m = 36.0 V. What are (a) Z, (b) , and (c) I? 90 R L 000 (a) Number Units (b) Number Units (c) Number Units
Problem 1. The wire is moving to the left with a linear velocity of 10 m/s as shown. Determine the magnitude and direction of the emf induced in the wire. Include a brief explanation. X X 45° Xv = 10 m/s 1=0.25 m X, X B= 02 T, into the page XE X
What is the induced emf in the coil at t=25 ms