4-26 Steel rods (p = 7832 kg/m³, c, = 434 J/kg -K, and k = 63.9W/m-K) are heated in a furnace to 850°C and then quenched in a water bath at 50°C for a period of 40 s as part of a hardening process. The convection heat transfer coefficient is 650 W/m² K. If the steel rods have diameter of 40 mm and length of 2 m, determine their average temperature when they are taken out of the water bath.

4-26 Steel rods (p = 7832 kg/m³, c, = 434 J/kg -K, and k = 63.9W/m-K) are heated in a furnace to 850°C and then quenched in a water bath at 50°C for a period of 40 s as part of a hardening process. The convection heat transfer coefficient is 650 W/m² K. If the steel rods have diameter of 40 mm and length of 2 m, determine their average temperature when they are taken out of the water bath.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A piece of chromium steel of length 7.4 cm (density = 8780 kg/m³, K = 50 W/m.K, and Cp = 200 j/kg.K) with mass 1.27 kg, is rolled into a solid cylinder with the same length and heated to a temperature of 600 C and quenched in oi at 36 C. You may take the convective heat rate coefficient between the oil and the cylinder at 280 W/m².K. a) Show that the lumped capacitance system analysis is applicable by calculating the Bi Number b) Find the temperature of the cylinder after 4 min. c) Find the total energy loss during this period. The temperature of the cylinder after 4 min is: The Bi Number is: The total energy loss during this 4 min period is: Choose Choose Choose
Steam condenses at 100°C on the outer surface of a pipe with a thermal conductivity of 180 J/ms°C. The surface heat transfer coefficient of the water flowing in the pipe is 4000 J/m²s°C, and the heat transfer coefficient created by the steam condensing outside is 10000 J/m²s°C. The length of the pipe is 5 m and the thread diameter is 25 mm. Since the pipe thickness is 1 mm, calculate the total heat transfer coefficient and the rate of heat transfer from the condensed steam to the water at 15 °C
6. 1 - J: Water is passed through a 3 cm internal diameter, 8 m long tube is heated from 15 °C to 75°C . The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of 8 L/min, determine the power rating of the resistance heater. Also, estimate the inner surface temperature of the pipe at the exit. L 3 p= 990.1kg/m? k = 0.637 W/m.°C v = u/p=0.602 x10-6 m²/s C, = 4180 J/kg.°C Pr = 3.91
In an aluminum container weighing 0.30 kg are 0.70 kg of water in thermal equilibrium at a temperature of 70°C. Container and water temperature together cool at a rate of 2.5 K/min. What is the heat flux leaking from the container?
A 0.025-mm-diameter stainless steel wire having K =16 W/m • C is connected to two electrodes. The length of the wire is 80 cm and it is exposed to a convection environment at 20 •C with h = 500 W/m2 • •C. A voltage is impressed on the wire that produces temperatures at each electrode of 200 -C. Determine the total heat lost by the wire in cal/hr.
A long 3-mm diameter rod of steel (ρ = 7840 kg/m3, c = 460 J/kgK, k = 43 W/mK)has a uniform initial temperature of 650C. The rod is then suddenly immersed in alarge container of 25C water. The hot rod causes the water immediately surroundingthe rod to boil, giving rise to a heat transfer coefficient of 5600 W/m2K. The boilingstops when the rod reaches a temperature of 100C, at which time the heat transfercoefficient becomes 750 W/m2K. Find the time period during which boiling occursand the total time required for the rod to reach a temperature of 40C. Use acharacteristic length for this problem.
Please solve this prob, Thank you
A brass wire of 0.8 mm in diameter and 12 m long is annealed in an annealing furnace at a temperature of 400°C. Find the time required for the wire to reach the temperature of 150°C if the temperature of the wire before placing it inside the furnace is 30°C. Take h = 35 W/m2 K. Density = 8500 kg/m3. Specific heat = 0.335 kJ/kg K.
Design a solar chimney to cover 75% of total heating losses, where U value for the chimney=0.5 W/m2.K and the total wall area of the spaces equal 70m2 and the temperature outside are 5oC at night and 8oC at day and the temperature for the interior is 24 oC.
a wire is submerged in a liquid at 110 degrees Celsius where the convective heat transfer coefficient is 4000 W/m^2K Determine the temperature at the center of the wire in degrees celsius