3. What is adiabatic temperature in a combustion?Please select all answers that apply:a) Adiabatic flame temperature is the maximum flame temperature for gaseous HC burning in oxygen or air.b) Adiabatic flame temperature is the same as total temperature.c) Adiabatic flame temperature is achieved when kinetic energy reduces to a small values.d) Adiabatic flame temperature is achieved when kinetic energy reduces to zero.e) Adiabatic flame temperature is achieved when there is no heat transfer. 4. Describe heat of reaction.Please select all answers that apply:a) Heat of reaction is the amount of heat occurring during a chemical reaction at a given temperature.b) It equals the enthalpy of reaction for a constant pressure process.c) It is negative for all exothermic processes; it is positive for all endothermic processes.d) Heat of reaction is the amount heat liberated by the chemical reaction.e) Under constant pressure and temperature, the heat changes for a chemical reaction are definite.

Adiabatic Temperature ***As per our company policy we are supposed to do only 1 question if you need…

3. What is adiabatic temperature in a combustion? Please select all answers that apply: a) Adiabatic flame temperature is the maximum flame temperature for gaseous HC burning in oxygen or air b) Adiabatic flame temperature is the same as total temperature. c) Adiabatic flame temperature is achieved when kinetic energy reduces to a small values. d) Adiabatic flame temperature is achieved when kinetic energy reduces to zero. e) Adiabatic flame temperature is achieved when there is no heat transfer.

3. What is adiabatic temperature in a combustion? Please select all answers that apply: a) Adiabatic flame temperature is the maximum flame temperature for gaseous HC burning in oxygen or air b) Adiabatic flame temperature is the same as total temperature. c) Adiabatic flame temperature is achieved when kinetic energy reduces to a small values. d) Adiabatic flame temperature is achieved when kinetic energy reduces to zero. e) Adiabatic flame temperature is achieved when there is no heat transfer.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water enters a steam boiler at 10 bar pressure, 80°C temperature and 4 kg/s mass flow and leaves the boiler at the same pressure and 250°C temperature. Liquid fuel with a calorific value of 40,000 kJ/kg is burned with 80% efficiency. ; A) What is the thermal power transferred to the water in the boiler? B) What is the hourly fuel consumption of the boiler?
Convert the total kilowatts per year for all appliances into equivalent amounts (pounds) of oil burned to generate this energy. (It takes about 5.4 pounds of fuel oil to generate one kilowatt of energy. So, pounds of fuel oil per year = kilowatts per year * 5.4) __________________ Pounds fuel oil per year
Question 4: A fire in a 4 m x 5 m compartment can be representative of a "medium" f-fire. This compartment has wood (with a moisture content of 12%) as fuel. The peak heat release rate to be achieved is 10 MW. Assuming the calorific value of dry wood is 16.7 MJ/kg, the fuel load (on floor area) is 30 kg/m2. Find the duration of the steady-state burning phase and the total duration of the fire buning due to dry wood.
Question No. 12: Methane CH4 is burned with stoichiometric amount of air during a combustion process. Assuming complete combustion, determine the air-fuel and fuel-air ratios.
7. Describe the difference(s), if any, between pre-mixed and diffusion type combustion. Please select all answers that apply: a) In pre-mixed type combustion, the fuel and oxidizer are mixed before entering the combustion chamber. b) In diffusion type combustion the fuel and oxidizer enter the combustion chamber from two separate inlet streams. c) In pre-mixed combustion the fuel and oxidizer enter the combustion chamber through a single stream. d) In diffusion combustion, the fuel is injected through a nozzle. e) In diffusion combustion, the oxidizer swirls around the fuel nozzle.
9. Adiabatic Flame Temperature is achieved when (a) the combustion heat is the maximum (c) the combustion heat is the minimum (b) there is no loss in the heat to the surroundings (d) all products are at the same temperature has the most affinity to water to form sulfuric acid. (b) SO₂ (d) SO 10. Among all sulfur compounds, (a) SO3 (c) SO4² 11. When comparing the performance of SI engines, the (a) Indicated -efficiency is used as the measure. (b) Thermal (d) volumetric (c) mechanical 12. For a complete combustion, the reaction time should be longer than the physical time. (a) True (b) False
.) A 300 MW pulverized coal-fired power plant of 42% efficiency uses coal with an ash content of 19% and a neating value of 24,000 kJ/kg. Assume 28% of the ash content goes up the stack as particulate matter in the flue gas. The PM emission is controlled by an ESP which has the following efficiencies and weight distribution in the given size ranges. Find the fly ash emitted in g/s. size efficiency (%) wt% in flue gas 0-5 70 7 5-10 92.5 19 10-20 96 21 20-40 99 24 >40 100 29
Which of the following statement(s) is(are) correct? Group of answer choices A. N B. The pressure, volume, and temperature of the steam are not connected by simple equations unlike ideal gases. C. An irreversible adiabatic process is a constant entropy process. D. The vaporization process of steam is isobaric in nature. E. The general energy equations for ideal gas are analogous to the equations for the processes of vapors.
The ignition quality of petrol is expressed by, (A) Cetane number (B) Octane number (C) Calorific value (D) All of these