3) For the following system, the rod is uniform and weighs 1200N and the sign weighs 2000N. The diameter of the cylindrical supporting steel cable is 4.00cm. a) Determine the tension needed in the steel cable to keep the system in equilibrium. b) Determine the horizontal and vertical forces on the rod due to the pivot. c) Determine the fractional change in the steel cable.

3) For the following system, the rod is uniform and weighs 1200N and the sign weighs 2000N. The diameter of the cylindrical supporting steel cable is 4.00cm. a) Determine the tension needed in the steel cable to keep the system in equilibrium. b) Determine the horizontal and vertical forces on the rod due to the pivot. c) Determine the fractional change in the steel cable.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A horizontal boom 11.5 M in length, AE is supported by guy wires from A to B,C and D. If the tensile…

A: Given: Fad = 360kN Resultant is horizontal at A To find: Tension in wires AB,AC and resultant

Q: The 6 m uniform rod as shown below weighs 1000 N. Segment AB and BC is 4 m long. The cable acts at a…

A: To find: The reaction at point A, D and C. Given: The length of rod is l=6 m. The weight of the rod…

Q: QUESTION 4 Determine the equivalent mass (meq) to be located at C for the transitional masses…

Q: The 6 m uniform rod as shown below weighs 1000 N. Segment AB and BC is 4 m long. The cable acts at a…

Q: Problem 2. Considering a 20 kg bar as shown in the figure: a) find angle theta and the reactions to…

A: Consider NA as the reaction at point A, NB as the reaction at point B, fB be the frictional force…

Q: 1. Figure Q1 shows an illustration of a bell crank mechanism that is in a state of static…

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: For the following diagrams, determine the perpendicular component F, for each force shown, as well…

Q: 2.) A person uses a force P to keep the pulley system in equilibrium. The mass shown is 10 kg. Note…

Q: Q2/From the figure below for 100 kg cylinder, find the magnitude of unit vector of line AB and line…

Q: An elastic string of natural length 4l and modulus of elasticity 4mg is stretched between two points…

Q: The rails of a 50 m long steel railroad is initially at a temperature of 20°C and laid with a…

Q: Determine the magnitude of the force in member FD. b) Determine the magnitude of the force in…

Q: L2 L3 D A -La Find the magnitude of the force exerted on bolt A, given: P= 100 lb, L1 = 1.4 in, L2 =…

Q: A block of mass 40 kg is resting on an inclined surface as shown in figure 4. A) Draw the free body…

A: Given:- M=40kg Angle = 25 degree To find:- a) Free body diagram of block b) Conditions for static…

Q: A sandwich board advertising sign is constructed as shown in the figure below. Hinge- 0.50m Chain…

A: Given Data: m=7.2 kg To Find: (a) The tension in the chain. (b) Force exerted by each side on the…

Q: 1. The boom of the wall crane 4m long is held at right angles to the wall by a wire that is attached…

A: “Since you have asked multiple question, we will solve the first question for you. If youwant any…

Q: 2. For the crank-slider machine shown below, the collar at A is frictionless. The vertical applied…

Q: Q1-A- A man stands on the middle rung of a 250 N ladder resting on a smooth floor and against a wall…

Q: Determine the angle α ,and then the tensile strength in the two cables ,Tca and Tcb, for which the…

A: To find angle alpha and tension in cable AB and AC

Q: Q3: Replace the three forces acting on the rod shown in Fig.3 by a single equivalent force R.…

A: given; vertical force in upward (F1)=500Nvertical force in downward(F2)=600Nhorizontal…

Q: in the figure below weighing 99 kg/m^2, is lifted slowly by the cables AC and BC. For equilibrium,…

Q: A uniform ladder 8 meters long and weighing 350 N rest against a smooth vertical wall at an angle of…

A: Free Body diagram Let F is the horizontal force necessary at the base to keep the ladder from…

Q: A motorized cable car weighs 1 MT, carrying a loadP is traveling along a straight horizontal cable…

A: given; ⇒mass of car (m)=1MT =1000kg⇒weight of car (w)=mg…

Q: 1) Determine the tension in cable AB and the force developed in struct AC. 7 ft 13 ft 4700 Ib 16 ft

A: It is required to determine tension in cable AB and the force developed in struct AC.

Q: The 13m uniform rod as shown below weighs 1020 N. Segment AB and BC is 6m long. The cable acts at a…

Q: Q1. Two masses are suspended by the cable system as shown in Figure Q1. The cable BC is horizontal.…

Q: The traffic light shown below is supported by a system of cables. Points A and B are in a vertical…

Q: 4.) Calculate the pin reactions at A, B, and C for the system shown. Assume all structural members…

Q: a) Find the tension in the string. b) Determine the normal force on the 5.0 kg block.

A: To find Tension in string normal force

Q: QI: Find the magnitude and the direction of the result of the system force shown in figure below. F2…

Q: Three hydraulic cylinders control the motion of the backhoe arm and bucket in the given figure. In…

Q: Determine the force in the spring with stretched length 3 inches and a spring potent of 2.10 Jhift…

Q: 3. A uniform, 200-kg plate is kept in static equilibrium by two hinges, A and B, and a single cable,…

A: The mass of plate is DCE is a single cable.

Q: Find the true magnitude and direction of the forces at all the supports A and B of the truss at…

Q: Evaluate the fo Kowing limils 1- h メ-3x ターク 4x+5 (勢学。 8、し子x B h-(5+ マーのる) 9-人メー→(3×+ (4x+1 2x²+ t…

Q: The bent rod is supported as shown in the figure by a smooth surface at B and by a collar at A,…

A: F = 120 lbM = 400 lb⋅ft

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

3) For the following system, the rod is uniform and weighs 1200N and the sign weighs 2000N.
The diameter of the cylindrical supporting steel cable is 4.00cm.
a) Determine the tension needed in the steel cable to keep the system in equilibrium.
b) Determine the horizontal and vertical forces on the rod due to the pivot.
c) Determine the fractional change in the steel cable.
Supporting Cable, with tension FT
3/4L
25°/0
L
Pivot
x=90°
A sign
B = 65°

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Given

VIEW

Step 2: To calculate all the tension in steel cable using equillibrium condition

VIEW

Step 3: To calculate the horizontal and vertical forces

VIEW

Step 4: To calculate the fraction change in steel

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 5 steps with 6 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A 4.2‑kg brown hare walks on a horizontal beam (the beam's mass m = 2.8 kg and length a = 2.4 m). The beam is suspended with two ropes attached to the ends of the beam. What should be the distance between the hare and the left end of the beam so that the tension in the left rope is three times as big as the tension in the right rope? 1. The distance from the left end, b = If the hare is at the distance found in the previous question, calculate the tension in each rope. 2. The tension in the left rope, T1 = 3. The tension in the right rope, T2 = ------------------------------------------------------------------ A bike wheel has a radius of R = 0.62 m and a mass of m = 2.6 kg spins at 270 rpm. What is the angular momentum of the wheel? Assume that the wheel has a shape of a ring. The angular momentum of the wheel, L ? A typical bowling ball might have a mass of 7 kg and a radius of 12 cm. How fast the ball should spin to have the same angular momentum as the wheel from the…
Two bodies is connected in point C, are supported by rigid underlay at an angle α. F is the force acting on right body. We are considering the weight of bodies G and the friction between the bodies and the underlay. Length of bodies l=2000mm.    G1= 160 N, G2= 180 N, α = 30° Find:  1.) Find the magnitude of the force so that it slips on the underlay 2.) Draw the dependence of the force F as a function of the coefficient of friction f (in the range 0-0.5)
3) A machine weighing 1500 N is supported by two chains attached to some point on the machine. One of these ropes goes to the eye bolts in the wall and is inclined 30°to the horizontal and other goes to the hook in ceiling and is inclined at 45°to the horizontal. Find the tensions in the two chains.
4. A uniform ladder 10m long and weighing 350N rests against a smooth wall at an angle of 30° with the wall. A 700N man stand 6m up from the bottom of the ladder. Find the horizontal force necessary at the base to keep the ladder from slipping.
Please use the Rigid Bodies method from vector dynamics.
Two weights, A and C, are fixed to a bar, B. Their masses are: A = 60 kg, B = 230 kg,C = 45 kg. B is, in turn, connected to a fixed vertical post by a hinge and a support cableD. The geometry of the system is shown at right. Treat weights A and C as point masses a)What is the tension in support cable D? Be sure to include a detailed freebody diagram to accompany your analysis.b) What is the magnitude of the force provided by the hinge?c) What is the moment of inertia of the A + B + C as a rigid system, for rotationabout the hinge? For analysis, break the beam into a short piece to the left of thehinge, and a separate longer piece to the right of the hinge. If the support cable D on should break,d) what is the angular acceleration of the beam and weights at the moment the cable breaks?e) what is the magnitude of the linear acceleration experienced by each of the weights, A and C, at moment the cable breaks?
Complete all parts for upvote
a garage door 15 ft long and 8 ft high weighs 80 lbs. the hinges are 1.5 ft from the upper and lower sides respectively and the upper hinge carries the entire weighs of the door. find the reaction of the upper hinge.
a garage door 20 ft long and 10 ft high weighs 90 lbs. the hinges are 2 ft from the upper and lower sides respectively and the upper hinge carries the entire weighs of the door. find the reaction of the upper hinge.
Fast please give me all answers please
The Cylinder weighs 1000 kg, rest on an plane which is inclined at 34° from the horizontal. The normal force acting on a plane to the cylinder is 10 KN. Assume smooth surface, the cylinder leaned to a vertical rod of 8m long and has a weight of 5 KN which was supported by a cable and a hinged (as shown). Find the tensile force of the cable holding the rod and the reactions of hinged to support the cylinder from sliding.
9 in. 30° x 6 in. 3 in. * B 3 in. 3 in. 4 in. The top cylinder weighs 100 lbs., the middle cylinder weighs 150 lbs. and the bottom cylinder weighs 200 lbs. A) Compute the forces on the L shaped support rack from each cylinder. Include free body diagram of each cylinder. B) Compute the reactions on the L shaped support rack at A and B. Include a free body diagram of the support rack.