If the given beam section is used for a simply supported beam 5.0 m span, using fc = 21 MPa and fyt = 280 MPa:10-mm-dia425 mm@ 200 mm500 mm-275 mm75 mm25. Calculate the nominal shear strength of concrete, using simplified formula of NSCP 2015. =kN26. Calculate the nominal shear strength of the stirrups, Vg =kN.27. Calculate the design sectional shear strength of the beam =kN28. Determine the maximum factored uniform load in that can be sustained based on shear strength of the cross-section only. =kN/m29. Determine the maximum live load in that can be sustained based on shear strength of the cross-section only. =kN/m30. If the total factored uniform load is 60 kN/m, calculate the ultimate shear force at critical section for shear in kN. =kNINPUT ALL ANSWERS ROUNDED TO WHOLE NUMBER

fc'=21 MPafy=280 MPad=425 mmbw=275 mm10 mm 2-legged stiruppsspacing=200 mmAs per the company's…

25. Calculate the nominal shear strength of concrete, using simplified formula of NSCP 2015. = kN 26. Calculate the nominal shear strength of the stirrups, Vs = kN. 27. Calculate the design sectional shear strength of the beam = kN

25. Calculate the nominal shear strength of concrete, using simplified formula of NSCP 2015. = kN 26. Calculate the nominal shear strength of the stirrups, Vs = kN. 27. Calculate the design sectional shear strength of the beam = kN

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Reinforce Concrete Design The beam section shown in the Figure 3 will carry the same loading…

A: Given values: Pu = 175 KN f' c = 30 MPa fy = 345 MPa b = 305 mm d = 510 mm Steel reinforcement: 5-25…

Q: What is the threshold torsion (kN-m) of a rectangular beam with a width of 403 mm and an over-all…

A: Given Data: The width of a rectangular beam is b=403 mm. The overall-depth of a rectangular beam is…

Q: The compressive strength of concrete cube is 2.67 N/mm^2. Calculate the load acting on the cube…

A: Given:Compressive strength of the concrete cube,σc=2.67 N/mm2side of the cube, a=15 cm or 150 mm

Q: PLEASE WRITE THE COMPLETE SOLUTION NEATLY: A rectangular beam has b = 250 mm and an effective depth…

A: b = 250 mm d = 490 mm fc' = 20.7 MPa fy = 420 MPa As = 3-20mm diameter bar Calculate ultimate…

Q: The permissible bending compressive strength for M 25 grade of concrete is 8.5 N/ mm². Its…

A: Given- M25 grade of concretePermissible bending compressive strength-σcbc=8.5 N/mm2It is needed to…

Q: What is the threshold torsion (kN-m) of a rectangular beam with a width of 402 mm and an over-all…

A: Given Data: The width of a beam is b=402 mm. The overall depth of a beam is D=571 mm. The distance…

Q: Question 19 A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with…

A: Given:- b=230mm d=500mm 4-20mm diameter bars top of 2-16mm bars concrete cover to bar centroid at…

Q: A reinforced concrete beam that has a width of 280 mm and an effective depth of 520 mm. It is…

A: The given values are shown below,Width =280mmEffective depth =520mmf;c=21MPafs=128MPan=9To find…

Q: Consider the prestressed concrete beam and prestressing steel stress-strain diagram given below. The…

A: Given- Ultimate strain capacity - 0.003 in/in Concrete strength - 4000 psi Fse - 137 ksi Ec - 3850…

Q: Assuming the concrete is uncracked, compute the bending stresses in the extreme fibers of the beam…

A: Given

Q: 5. Given fc’ = 35 MPa, solve for the modulus of elasticity of concrete a. 27,800.00 MPa b. 27,805.57…

A: Thank you for the question . As per honour code we will answer the first question since exact one…

Q: CAN SOMEONE HELP ME SOLVE THIS REINFORCED/PRESTRESSED CONCRETE PROBLEM. USE NSCP 2015 A concrete…

A: We calculate the neutral axis x by equating compression force equals to tension force and then put…

Q: Determine the nominal bending strength of the beam section shown in the figure below. The overall…

A: fc = 49 MPa fy = 420MPa h(D) = 700mm d = 700 -80 = 620mm b = 200mm

Q: A rectangular beam has a width of 260 mm and an overall depth of 470 mm. concrete cover is 60 mm…

A: Appreciate if there is detailed work with explanation and finds you helpful for ease of…

Q: A rectangular beam has b = 250 mm and an effective depth of 490 mm. 28th day compressive strength of…

A: A rectangular beam of Width (b) = 250 Effective depth (d) = 490 mm Compressive strength of concrete…

Q: Referenced concrete When designing the same bim Why is the load in the case of moment greater than…

A: Moment plays an important role in the designing of structures including Beams, Slabs etc., To…

Q: Awall form 14 ft high is filled with 160 lb per cu ft concrete at a tem perature of 70°F. The…

Q: The 20mmØ bottom bars in the figure are epoxy coated. Assuming normal weight concrete, fy= 420 MPa,…

Q: 3. A column shown below has tie reinforcement conforming to ACI 25.7.3. Assume normal- weight…

A: Given: concrte stress fc'=6000 psi allowed stress in concrete fc=60002=3000 psiand for steel grade…

Q: 2. In the beam flexural test of concrete shown, calculate the flexural strength, 100 mm 100 mm…

Q: Calculate the area of reinforcement required for the beam.

Q: If the compressive strength of the concrete is 4 ksi and the yield strength of steel is 60 ksi, the…

Q: • A rectangular beam has the dimensions b=250mm, h=650mm, and d=600mm and is reinforced with three…

Q: If a concrete column 200 x 200 mm in cross- section is reinforced with four steel bars of 1200 mm²…

A: given area A=200×200 mm21200 mm2 cross sectional areastress in concrete=5 N/mm2Es=15Ec

Q: 1. Which of the following is the compressive strength of concrete if β1=0.65. a) 60 MPa

A: compressive strength of concrete= 21Mpa

Q: for rectangular reinforced Con crete sectim t h= 680MMg d=600mm, b= 330mm, As = 6$16mm fx=22 MP ,…

A: Solution Given data: Dimension of rectangular reinforced section: Height(h)=680 mm effective…

Q: 1.) Given the following properties of a rectangular concrete beam: b = 280mm, d = 480 mm, f'c = 21…

Q: The T-section shown is subjected to a design ultimate moment of M = 180kN.m. Find the require area…

A: Given data: fc=30 MPafy=450 MPabf=400 mmbw=200 mmDf=100 mmd=350 mmMu=180 KN-m We need to calculate…

Q: 2nd: A simply supported 14-m span beam, 300-mm wide by 540-mm deep, is pre- stressed by straight…

Q: A hollow concrete masonry unit has an actual dimension of 150mm x 200mm x 400mm (W x H x L). The…

Q: Design the Beam AB Below by using Working Stress Method ;

A: Compressive stress is the force that deforms the material in a way that reduces the volume of the…

Q: Using the same concrete dimensions as were used for the second solution of Example 3.6 (b = 10 in.,…

A: Given data, b = 10 in d = 17.5 in Mu = 1300 in-kips fy = 50 ksi (Considering) fc = 4 ksi…

Q: A rectangular beam has a width of 260 mm and an overall depth of 470 mm. concrete cover is 60 mm…

A: We have to find shear and flexure of beam and axial compression force of beam is 80 KN.

Q: A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars,…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars.…

Q: A continuous beam 250 mm x 450 mm carries 6 numbers of 12 mm diameter longitudinal bars as shown.…

Q: Using the following details, Design the shear reinforcement along the length of the beam if it is…

A: Shear reinforcement is used to withstand shear forces that are greater than the concrete's shear…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

If the given beam section is used for a simply supported beam 5.0 m span, using fc = 21 MPa and fyt = 280 MPa:
10-mm-dia
425 mm
@ 200 mm
500 mm
-275 mm
75 mm
25. Calculate the nominal shear strength of concrete, using simplified formula of NSCP 2015. =
kN
26. Calculate the nominal shear strength of the stirrups, Vg =
kN.
27. Calculate the design sectional shear strength of the beam =
kN
28. Determine the maximum factored uniform load in that can be sustained based on shear strength of the cross-section only. =
kN/m
29. Determine the maximum live load in that can be sustained based on shear strength of the cross-section only. =
kN/m
30. If the total factored uniform load is 60 kN/m, calculate the ultimate shear force at critical section for shear in kN. =
kN
INPUT ALL ANSWERS ROUNDED TO WHOLE NUMBER

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1 Given

VIEW

Step 2 Solution

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Question 33 A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 21 MPa and steel yield strength fy = 350 MPa for 20-mm bars and fy = 275 MPa for 16-mm bars. Determine the maximum steel ratio if the beam is singly reinforced in negative bending with the given material strengths and the tensile strain is limited to 0.004 upon crushing of concrete. Write the answer in 5 decimal places only.
1.) Given the following properties of a rectangular concrete beam: b = 280mm, d = 480 mm, f'c = 21 MPa, fy = 414 MPa. The beam is reinforced for tension only. Determine the design strength under the following conditions. a.) When the beam is reinforced with three 25 mm diameter bars. b.) When the beam is reinforced with four 25 mm diameter bars. c.) When the beam is reinforced with seven 25 mm diameter bars.
A group of concrete cubes mixed with different water ratios .. The group with water ratio W / c = 0.3The maximum load was testedFailure causes every cube in the group Required:1- Finding the stress rate for each group in unit N / mm2 with discussing the results and the effect of the water w / c ratio on the compressive strength of the group.
Please give me the correct solutions and answer of this problem in principles of reinforced/prestressed concrete
A rectangular beam has the following properties. Assume 12 mm stirrups. Assume a single layer of reinforcements. Calculate Mu. Given: Width of the beam, = 300 mm Over-all depth, h = 425 mm Tension reinforcements = 5 pcs 28 mm dia Comp reinforcements = 4 pcs 20 mm dia Specified strength of concrete, f'c = 28 Мра Steel yield strength, fy = 345 MPа Note: Round off your final answer in 3 decimal places. No need to type the units.
Calculate the uniform load w (in addition to the beam weight) that will cause the section shown to begin to crack if used as a 28-ft simply supported beam. Use normal weight concrete with L=4000 psi. f = 60,000 psi, E₁=29,000 ksi, and the reinforced concrete weight = 150 lb/ft³. 4 in. 28 ft 4 in. 22 in. 30 in. 2 in. 2 in. 3 #9 ● ||—12 in—-|
Question 31 A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the top with 2-16-mm bars. Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 21 MPa and steel yield strength fy = 350 MPa for 20-mm bars and fy = 230 MPa for 16-mm bars. Determine the design moment capacity in kN∙m of the beam in negative bending. Write the answer in 2 decimal places only.
Q2- A cylindrical concrete specimens 150 mm in diam. and 300mm high each were tested in split tensile test, the following results were observed, determine the tensile strength of concrete and estimate the compressive strength. S.N 1 3 4 7 Load, kN 267.3 269.4 260.5 255.4 287.2 291.4 282.5 (Load+5x18
CAN SOMEONE HELP ME SOLVE THIS REINFORCED/PRESTRESSED CONCRETE PROBLEM. USE NSCP 2015 A concrete beam has a width of 304.8 mm and an effective depth of 495.3 mm. It is reinforced with 14.194 cm2 steel bars with fc′ = 17,237.5 kPa (n = 10). Determine the flexural stresses caused by a bending moment of 84.1 kN·m
Correct solution
I need to solve this question in concrete