23-25 PCE1-(2PXf(3) Mc FT PS Queu | Enginhttps://drive.google.com/file/d/17vbsQL0m-OgzrkIZY6...an unsupported mode, 11 Lile capeofA0.045 cm2 and weighs 0.90 kg. Assume that the tape isexactly 30.0 m when supported throughout its length under astandard pull of 6.0 kg, and its modulus of elasticity is2.10 x 106 kg/cm².C Untitl21. NORMAL TENSION. A 30-m steel tape supported at its ends.weighs 0.03 kg/m and is of standard length under a pull of6.5 kg. If the elastic modulus of steel is 2.0 X 106 kg/cm²and its weight density is 7.9 X 103 kg/cm³, determine thetension at which the effect of sag will be eliminated bythe elongation of the tape due to increased tension.22. COMBINED CORRECTIONS. A 30-m tape weighs 12.5 g/m andhas a cross section of 0:022 cm². It measures correctlywhen supported throughout under a tension of 8.0 kg and ata temperature of 20 c. When used in the field, the tape isonly supported at its ends, under a pull of 9.0 kg, and atan average temperature of 28°C. Determine the distance24. MEASURING ANGLES WITH1063.55, 1840.33,measure27°CRain comingNew +ofbetween the zero and 30-m marks.23. COMBINED CORRECTIONS. A line was found to be 2865-35 mlong when measured with a 30-m tape under a steady pull of6.5 kg at a mean temperature of 30°C. Determine the correctlength of the line if the tape used is of standardat 20°C under a pull of 5.5 kg.lengtharea of tape to be 0.025 cm²,kg/cm² " and coefficientAssume the cross-sectionalelastic modulus as 2.10 X 106thermal expansion to be0.0000116/1°c.PRODUCO Search527TAPE. The sides of a triangleand 1325.05 m. Determine the00IMI FT_PS| Queu | Engin C Untitlhttps://drive.google.com/file/d/17vbsQLOm-OgzrkIZY6...A tolong when measured with a 30-m tape under a steady pull ofPDF PCE1 Problem Set_2.pdfiean temperat Open with C. Deteinethe Forrectlength of the line if the tape used is of standard lengthat 20°C under a pull of 5.5 kg. Assume the cross-sectionalarea of tape to be 0.025 cm², elastic modulus as 2.10 X 106kg/cm²and coefficientof thermal expansion to be0.0000116/1°c.PCE1-PXf mga t24. MEASURING ANGLES FITH1063.55, 1840.33,three angles in the triangle.measure27°CRain comingCo25. OBSTRUCTED DISTANCES. In the accompanying sketch it isrequired to determine the distance between points A and Bwhich spans a wide and deep river.measure385.75 m and 529.05 m,perpendicular to line ABC.Lines BD and CE, whichrespectively, are estab-If points D and E arelishedlined up with A and the length of BC=210.38 m, determinethe required distance.90°Page 4/4TAPE. The sides of a triangleand 1325.05 m. Determine theVO SearchNew +E+0RHI IMI

Answered: Image /qna-images/answer/e930c35e-6a46-41c3-81bb-9912d2eab2ad.jpg

Engineering

Civil Engineering

23

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: one help please can you help me to draw an isometric view of the bridge (truss)

Q: The front and side views are given. Use this to create the top view.

A: Hi! Thank you for the question As per the honor code we are allowed to answer only 1 question at a…

Q: 6. Using the equation of the magnetic field due to a single ring of charge, derive the formula for…

A: Step 1: Step 2: Step 3:don't forget to upvote :) thank you and comment if doubt exists Step 4:

Q: structural drawing please indicate a details in this image

A: The structural diagram is shown in the above figure. We have to indicate a details in this image.

Q: Draw the front, Side and top

A: For this, we can draw the diagram in Autocad. I have used the same to draw the diagram and have…

Q: 6-2, 6-3, 6-4, and 6-5 Compute $V for the cross sections shown in Figs. P6-2, P6-3, P6-4, and P6-5.…

Q: 1.2.7 show all work

A: Step 1: dear students yours questions is insufficient please full question upload then answers Step…

Q: 4) A precast T beam with the dimensions shown below is to be a used as a bridge over a small…

A: As per Bartleby's guidelines we are supposed to answer only first three questions. Kindly repost…

Q: d²y ¸ dy + 7. - бу 3D 36х dx² dx

Q: Draw the sectional view indicated by the cutting plane A-A SA AL

A: ASKED: To draw the sectional view produced by the plane A-A. To draw the sectional view using…

Concept explainers

Types of Composite

Composite materials are formed by merging two components that have different chemical and physical properties. The merged output is termed as a composite, whose properties are completely different from the individual components. Composite materials also have better strength than the individual components.Composite materials usually have two main parts, reinforcement material, and matrix material. The matrix material acts as a binder and surrounds the fiber of another material that bears a much higher strength. This material is known as the reinforcement material. The matrix materials are usually high-strength additives resins, while the fibers of the reinforced material can be random, oriented, and in a mat format.Composite materials are also known as fiber-reinforced composite polymers because they are composed of the polymer matrix which is reinforced to laboratory-created fibers or naturally occurring fibers, such as glass fibers, carbon fibers, or aramid fibers. Under the application of external loads, the matrix material absorbs and transfers the loads to the fibers, these fibers in return provide good compressive strength, tensile strength, and stiffness to the fiber-reinforced composite materials.Depending upon the matrix and the reinforcement material, different properties can be induced to the fiber-reinforced composite materials, including good corrosion resistance properties. The most common matrix material is the resin while the glass fibers act as the reinforcement material. Strong fibers provide strength and stiffness to the composite materials while, a soft and flexible resin provides shape to the composite materials.

Question

23-25

PCE1-
(2
PX
f(3) Mc FT PS Queu | Engin
https://drive.google.com/file/d/17vbsQL0m-OgzrkIZY6...
an unsupported mode, 11 Lile cape
of
A
0.045 cm2 and weighs 0.90 kg. Assume that the tape is
exactly 30.0 m when supported throughout its length under a
standard pull of 6.0 kg, and its modulus of elasticity is
2.10 x 106 kg/cm².
C Untitl
21. NORMAL TENSION. A 30-m steel tape supported at its ends.
weighs 0.03 kg/m and is of standard length under a pull of
6.5 kg. If the elastic modulus of steel is 2.0 X 106 kg/cm²
and its weight density is 7.9 X 103 kg/cm³, determine the
tension at which the effect of sag will be eliminated by
the elongation of the tape due to increased tension.
22. COMBINED CORRECTIONS. A 30-m tape weighs 12.5 g/m and
has a cross section of 0:022 cm². It measures correctly
when supported throughout under a tension of 8.0 kg and at
a temperature of 20 c. When used in the field, the tape is
only supported at its ends, under a pull of 9.0 kg, and at
an average temperature of 28°C. Determine the distance
24. MEASURING ANGLES WITH
1063.55, 1840.33,
measure
27°C
Rain coming
New +
of
between the zero and 30-m marks.
23. COMBINED CORRECTIONS. A line was found to be 2865-35 m
long when measured with a 30-m tape under a steady pull of
6.5 kg at a mean temperature of 30°C. Determine the correct
length of the line if the tape used is of standard
at 20°C under a pull of 5.5 kg.
length
area of tape to be 0.025 cm²,
kg/cm² " and coefficient
Assume the cross-sectional
elastic modulus as 2.10 X 106
thermal expansion to be
0.0000116/1°c.
PRODUC
O Search
527
TAPE. The sides of a triangle
and 1325.05 m. Determine the
00
IMI

FT_PS| Queu | Engin C Untitl
https://drive.google.com/file/d/17vbsQLOm-OgzrkIZY6...
A to
long when measured with a 30-m tape under a steady pull of
PDF PCE1 Problem Set_2.pdfiean temperat Open with C. Deteinethe Forrect
length of the line if the tape used is of standard length
at 20°C under a pull of 5.5 kg. Assume the cross-sectional
area of tape to be 0.025 cm², elastic modulus as 2.10 X 106
kg/cm²
and coefficient
of thermal expansion to be
0.0000116/1°c.
PCE1-
PX
f mga t
24. MEASURING ANGLES FITH
1063.55, 1840.33,
three angles in the triangle.
measure
27°C
Rain coming
Co
25. OBSTRUCTED DISTANCES. In the accompanying sketch it is
required to determine the distance between points A and B
which spans a wide and deep river.
measure
385.75 m and 529.05 m,
perpendicular to line ABC.
Lines BD and CE, which
respectively, are estab-
If points D and E are
lished
lined up with A and the length of BC=210.38 m, determine
the required distance.
90°
Page 4
/4
TAPE. The sides of a triangle
and 1325.05 m. Determine the
V
O Search
New +
E
+
0
R
HI IMI

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions