4.3 A steel cylinder having a mass of 120 kg is supported by two inclined planes, as shown. Sketch the free-body diagram for the cylinder. **Problem 4.3: Steel Cylinder on Inclined Planes****Description:**A steel cylinder with a mass of 120 kg is supported by two inclined planes. The task is to sketch the free-body diagram for the cylinder.**Diagram Explanation:**- The diagram showcases a large circle representing the steel cylinder, labeled with point \( O \) at its center.- Two contact points \( A \) and \( B \) are shown where the cylinder rests on the inclined planes.- The inclined plane on the left has dimensions forming a right triangle with vertical height 4 units and base 12 units.- The inclined plane on the right also forms a triangle, with a greater vertical height of 7 units and the same base of 12 units.- These planes are depicted with normal reaction forces at points \( A \) and \( B \).- The inclined planes are drawn with hatching lines indicating the incline direction and surface texture.- The task is to sketch the forces acting on the cylinder, such as gravitational force, normal forces at points \( A \) and \( B \), and any other forces present.

Answered: 20 kg is supported by two inclined…

Engineering

Mechanical Engineering

20 kg is supported by two inclined planes, as shown. Sketch

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: Instruction: Present the solution as instructed and draw the free body diagram. PS NO. 1. Determine…

A: Consider the reaction at the hinge point B is RB. The free-body diagram of the section AB is shown…

Q: 390 lb 1312 800 lb · ft - 8 ft- -4 ft- 3 ft 30°% BO 8 to 10. Draw the free-body diagram of member…

Q: E C В l3

Q: The tailgate OBC is attached to the rear of a trailer via hinges at O and two restraining cables AB.…

Q: 6 The figure shows a plana hat is held in static equilibrium two supports at joints A and G. The…

Q: (6) The 68 lb uniform square plate is suspended by three vertical wires as shown so that the plate…

A: Given:- Weight of the plate (W) = 68 lb Suspended by three vertical wires A, B and C To Find:-…

Q: Problem 4.2 - Bar AB is 4 feet long and weighs 20 lbs. It is supported by two cords and by smooth…

Q: Q.4) A basketball player weighing 200 lb hangs on the rim of the basketball hoop shown below. The…

A: Given: weight of basketball player=200 lbweight of the vertical post ABCD=100 lbweight of the…

Q: A uniform horizontal strut weighs 370.0 N. One end of the strut is attached to a hinged support at…

Q: A crane boom of mass 450 leg with its center of mass at C is stabilized bytwo cables AQ and BQ (Ae =…

A: Given, Mass of crane boom, m=450kgAe=304mm2P=20KNWeight of the crane boom,W=mgW=450×9.81W=4414.5N a)…

Q: 4.12 Calculate the force in cable AB and the angle 0 for the su port system shown. A 0 B W F = 100…

Q: 4.) Calculate the pin reactions at A, B, and C for the system shown. Assume all structural members…

Q: Q.2) Member ABC is supported by arm BD (pin connections at B and D) and a pin support at A. Member…

Q: center at G. Determine the force in the hydraulic cylinder AB (positive if in tension, negative if…

Q: 4.30 Calculate the force in the tie rod BC and the reaction at the pinned support at point A for the…

A: The force in the rod BC and the reaction at the point A. FBD: The free-body diagram is shown below.

Question

4.3 A steel cylinder having a mass of 120 kg is supported by two inclined planes, as shown. Sketch the free-body diagram for the cylinder.

**Problem 4.3: Steel Cylinder on Inclined Planes**

**Description:**

A steel cylinder with a mass of 120 kg is supported by two inclined planes. The task is to sketch the free-body diagram for the cylinder.

**Diagram Explanation:**

- The diagram showcases a large circle representing the steel cylinder, labeled with point \( O \) at its center.
- Two contact points \( A \) and \( B \) are shown where the cylinder rests on the inclined planes.
- The inclined plane on the left has dimensions forming a right triangle with vertical height 4 units and base 12 units.
- The inclined plane on the right also forms a triangle, with a greater vertical height of 7 units and the same base of 12 units.
- These planes are depicted with normal reaction forces at points \( A \) and \( B \).
- The inclined planes are drawn with hatching lines indicating the incline direction and surface texture.
- The task is to sketch the forces acting on the cylinder, such as gravitational force, normal forces at points \( A \) and \( B \), and any other forces present.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

The truss is subjected to the system of forces as shown in the foitowing figure. The truss is supported by a pin at C and a pin at D. The force in member (AB) is equal to. 2 m A E 1.5 m 2 m 6 kN 8 kN Select one: a. 8 kN - Compression b. 7.5 kN - Tension c. 7.5 kN- compression d. 10.6 kN - Tension
A basketball player weighing 200 lb hangs on the rim of the basketball hoop shown below. The vertical post ABCD is fixed at support D and weighs 100 lb with its center of gravity at point C. The backboard hoop assembly weighs 60 lb with its and its center of gravity is located at point G. Determine the support reactions at D and forces acting at pins E and F. Neglect the weights of members AE, IF, and IJ.
Please show clear work and free body diagram if possible
The structure shown below is a simplified tower crane. It carries a shipping crate suspended from B that has a weight of 116 kN . The main jib DCB (in green) has a weight of 17 kN concentrated in the center of the beam. This is pinned to the main body at D and is supported by a cable that is routed through pulleys at F and G and is attached to a concrete counterweight J. The main body AEFG (in yellow) is fixed to the ground at A. Various geometry: h1= 26.5 m h2= 3.9 m h3= 5.1 m l1= 12.8 m l2= 17 m l3= 4.3 mm θ= 57.6 degrees Assumptions : The main body AEFG can be considered massless. The cable CFGJ is massless. The pulleys at F and G can be considered massless, frictionless, and of negligible diameter. All bodies are considered rigid. Questions: Determine the weight of counterweight J in order for the main jib DCB to be horizontal. Determine the magnitude of the x and y components of force at pin D. Determine the reactions at fixed support A.
I need the answer as soon as possible
2.3.1
A luggage trasport truck is used to raise and lower luggage from an aircraft. A piece of laggage weighing 450 Ibs. is supported in the tension shown with a center of gravity at point G. The raising and lowering mechanism are connected to the truck bed by a pin support at F and a roller support at H, and to the luggage platform by a pin support at C and roller support at D. The hydraulic strut AB is pinned at either end and used to raise and lower the mechanism are negligible, that point C is vertically aligned with F, point D is vertically aligned with H, and that strut AB is vertically oriented. (a) Determine the support Reaction at F and H in the stationary position shown. (b) Determine the force in the hydraulic strut AB and state weather it is in tension or compression. Please draw separate diagram for every step.