2. Magnetic Resonance Imaging (MRI) is a medical technique for producing pictures of the interior of the body. The patient is placed within a strong magnetic field. One safety concern is what would happen to the positively and negatively charged particles in the body fluids if an equipment failure caused the magnetic field to be shut off suddenly. An induced emf could cause these particles to flow, producing an electric current within the body. Suppose the largest surface of the body through which flux passes has an area of 0.032 m and a normal that is parallel to a magnetic field of 1.5 T. Determine the smallest time period during which the field can be allowed to vanish if the magnitude of the average induced emf is to be kept less than 0.010 V.

2. Magnetic Resonance Imaging (MRI) is a medical technique for producing pictures of the interior of the body. The patient is placed within a strong magnetic field. One safety concern is what would happen to the positively and negatively charged particles in the body fluids if an equipment failure caused the magnetic field to be shut off suddenly. An induced emf could cause these particles to flow, producing an electric current within the body. Suppose the largest surface of the body through which flux passes has an area of 0.032 m and a normal that is parallel to a magnetic field of 1.5 T. Determine the smallest time period during which the field can be allowed to vanish if the magnitude of the average induced emf is to be kept less than 0.010 V.

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

QUESTION 23 In generating electricity, a magnet, surrounded by wires connected to the electrical grid, will be made to spin, using wind, a steam turbine, or moving water. Which answer best explains what is happening in the wires during this process. a. The magnet does not need to move, and still has the capability to make electrons move in the wires that surround it. b. An induced voltage and current flow is set up in the wires surrounding a magnet due to changes in magnetic temperature. c. A magnetic field surrounds the rotating magnet, pushes on the electrons in the wires, thus giving those electrons energy per charge (voltage). d. Light from the magnet is able to push electrons out of the material that makes up the wires. In so doing, the wires are made to have a flowing electrical current.
1 Which of the following is incorrect. Earth's magnetic poles and geographic poles differ. They want to minimize the magnetic potential energy by aligning the magnetic dipole moment with the external magnetic field. The Lorentz force is the sum of the electric and magnetic forces. If the velocity of the charged particles is perpendicular to the magnetic field, it rotates. The work done by the magnetic force is not always zero.
How will you change the magnitude of the magnetic field? I. Increasing/decreasing the number of turns of wire. II. Increasing/decreasing the surface area. III. Use an insulator. IV. Increasing/decreasing the length of conductor. a I, II, and IV only b II, III, and IV only c I, II and III only d I, III, and IV only
4. An electron is accelerated from rest by a potential difference of 1000 V. It then enters a uniform magnetic field of magnitude 200 mT with its velocity perpendicular to the field. Calculate the radius of its path and period in the magnetic field.
Which statement is correct about antiferromagnetic materials? а. Metal centers have no interaction with each other b. Magnetic dipoles are aligned in the same direction. С. Neighboring magnetic dipoles are aligned in opposite direction d. Antiferromagnetic materials are attracted to the magnetic field of a magnet.
2. An electron has a speed of 1.4 x 106 m/s. It travels through a 3.8 T magnetic field that is perpendicular to its velocity. An electric field is perpendicular to the B field and the velocity of the electron. The electron's velocity is constant. Find the magnitude of the electric field.
3. DETAILS MY NOTES You are working during the summer at a company that builds theme parks. The company is designing an electromagnetic propulsion system for a new roller coaster. A model of a substructure of the device appears in the figure below. The rod is of length d = 1.00 m and mass m = 0.700 kg. The rod carries a current I = 100 A in the direction shown and rolls along the rails of length L = 15.0 m without slipping. The entire system of rod and rails is immersed in a uniform downward-directed magnetic field with magnitude 8 = 1.90 T. The electromagnetic force on the rod is parallel to the rails, causing the rod to roll to the right in the figure. When a full-scale device is produced, this rod will represent the axle of wheels on which the car and i on the grounds of the company. By projecting the rod from the rails in a horizontal direction from a height h = 1.80 m, the projection speed can be determined from how far from the ends of the rails the rod hits the ground. Your…
13. You have the apparatus shown in Figure P21.13. A circular metal plate swings past the north pole of a permanent magnet. The metal consists of a series of rings of in- creasing radius. Indicate the direction of the current in one ring (a) as the metal swings down from the left into the magnet- ic field and (b) as the metal swings up to- ward the right out of the magnetic field. Use Lenz's law to justify your answers. Figure P21.13 Metal plate Magnet N
7. A very long thin wire produces a magnetic field of 0.002 x 10-4 T at a distance of 1.0 mm from the wire. What is the magnitude of the current? = 4 x 10-7 T.m/A) (Mo a) 1.0 mA b) 2.0 mA c) 4000 mA d) 3100 mA 8. An ideal solenoid having 200 turns and carrying a current of 2.0 A is 25 cm long. What is the magnitude of the magnetic field at the center of the solenoid? (но = 4 x 10-7 T.m/A)
2. A distance of 3 cm separates two straight, parallel, current-carrying wires with currents 18 500 A and 19 350 A, respectively. What is the force per unit length exerted by the two wires upon each other? a. 4456.31Nm b. 2387.29Nm c. 23.871Nm d. 44.563Nm
1. An alpha particle is accelerated from rest through a potential difference of 5 kV. It is sent into a mass spectrometer with magnetic field of 0.1 T. What is the radius of its path through the mass spectrometer?