2. Below is a hydraulic lift. A hydraulic pump pushes hydraulic oil in Input Force F1,pressure form of 1500psi that pushes a car up to the Output Force F2. This OutputForce F2 is driven by the same hydraulic oil in Input Force F1 and having the samepressure. Output Force F2, the lifting force, was delivered by circular piston. The14.7psi 101326Pa4500kg car sits on a simplified circular disk and a plate. latm =What is the equivalent of 1500psi to atm?What is the equivalent of 4500kg in N?a.b.What is the diameter a simplified circular disk/circular piston (in m)?C.ingut ForceCutput Fore F.Hydraulic pumps can lift large objects, like thecar, by using a minimal force on the handle

Name: 2. Below is a hydraulic lift. A hydraulic pump pushes hydraulic oil i
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: 2. Below is a hydraulic lift. A hydraulic pump pushes hydraulic oil in Input Force F1,pressure form of 1500psi that pushes a car up to the Output Force F2. This OutputForce F2 is driven by the same hydraulic oil in Input Force F1 and having the same

Given Applied pressure = 1500 psi Mass of the car =4500 kg 14.7 psi = 1 atm 1 atm=101326 Pa

Science

Physics

2. Below is a hydraulic lift. A hydraulic pump pushes hydraulic oil in Input Force F1, pressure form of 1500psi that pushes a car up to the Output Force F2. This Output Force F2 is driven by the same hydraulic oil in Input Force F1 and having the same pressure. Output Force F2, the lifting force, was delivered by circular piston. The 101326PA 4500kg car sits on a simplified circular disk and a plate. latm 14.7psi What is the equivalent of 1500psi to atm? What is the equivalent of 4500kg in N? %3D a. b. What is the diameter a simplified circular disk/circular piston (in m)? C. t Force F Output For F Hydrauic pumps can lift large objects, like the car, by using a minimal force on the handle

2. Below is a hydraulic lift. A hydraulic pump pushes hydraulic oil in Input Force F1, pressure form of 1500psi that pushes a car up to the Output Force F2. This Output Force F2 is driven by the same hydraulic oil in Input Force F1 and having the same pressure. Output Force F2, the lifting force, was delivered by circular piston. The 101326PA 4500kg car sits on a simplified circular disk and a plate. latm 14.7psi What is the equivalent of 1500psi to atm? What is the equivalent of 4500kg in N? %3D a. b. What is the diameter a simplified circular disk/circular piston (in m)? C. t Force F Output For F Hydrauic pumps can lift large objects, like the car, by using a minimal force on the handle

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Question 5 1 pts F2 F3 600 1000 600 600 Consider the three hydraulic lifts shown above. Rank the forces requi on the input arm (F1, F2, F3) if you want to keep the input and output arms at the same height. The input pistons all have equal diameters. The output pistons all have equal diameters. O F2 > F1 = F3 O F3 > F2 > F1 O F3 = F2 > F1 O F2 > F3 > F1 O F1 = F2 = F3
1. It has been estimated that a man's heart is about 33xm below his brain. Considering the density of human blood to be 1.1x10³ kg/m³, what pressure must the heart produce to supply blood to the brain?. 2. A cylindrical tank is 6m high and is full of water. An orifice 1m from the top is opened. How fsr from the bottom of the tank will the jet strike the ground?
A large man sits on a four-legged chair with his feet off the floor. The combined mass of the man and chair is 95.0 kg. If the chair legs are circular and have a radius of 0.500 cm at the bottom, what pressure does each leg exert on the floor? Pa Need Help? Read It
1) Pistons are fitted to two cylindrical chambers connected through a horizontal tube to form a hydraulic system. The piston chambers and the connecting tube are filled with an incompressible fluid. The cross-sectional areas of piston 1 and piston 2 are A1 and A2, respectively. A force F1 is exerted on piston 1. Rank the resultant force F2 on piston 2 that results from the combinations of F1, A1, and A2 given from greatest to smallest. If any of the combinations yield the same force, give them the same ranking. (Use only ">" or "=" symbols. Do not include any parentheses around the letters or symbols.) F1 = 5.0 N; A1 = 0.9 m2; and A2 = 1.8 m2 F1 = 2.5 N; A1 = 0.9 m2; and A2 = 0.45 m2 F1 = 2.5 N; A1 = 1.8 m2; and A2 = 3.6 m2 F1 = 5.0 N; A1 = 0.45 m2; and A2 = 1.8 m2 F1 = 5.0 N; A1 = 0.45 m2; and A2 = 0.9 m2 F1 = 2.5 N; A1 = 1.8 m2; and A2 = 0.9 m2 2) A bicycle tire pump has a piston with area 0.43 in2. If a person exerts a force of 22 lb on the piston while inflating a tire,…
During heavy lifting, a disk between spinal vertebrae is subjected to a 5250-N compression force. a. What pressure is created on the disk, in pascals, assuming that the disk has a uniform circular cross section 2.2 cm in radius? b. What deformation is produced, in centimeters, if the disk is 0.65 cm thick and has a Young’s modulus of 1.65 × 109 N/m2?
You can chew through very tough objects with your incisors because they exert a large force on the small area of a pointed tooth. What pressure in Pa can you create by exerting a force of 460 N with your tooth on an area of 1.00 mm2? in Pa
25,708 E 8. Water at a pressure of 4.70 atm at street level flows into an office building at a speed of 0.80 m/s through a pipe 5.00 cm in diameter. The pipes taper down to 2.00 cm in diameter by the top floor, 22.0 m above. Calculate the water pressure in such a pipe on the top floor. Pa 27 R DI C F V 96 5 T G tv 6. B MacBook Air & 7 D N 34 8 M ( 9 K A O O W F10 P P zoom by mi 04 M vauies or the puffer s Am delete
A person is laying flat on their stomach while tanning at the beach. What is the force on the person's back from the pressure of the atmosphere? Approximate the surface of the person's back as a 0.6 m x 0.5 m rectangle and recall that atmospheric pressure is Patm = 1.01 x 105 N/m2.
A force of 120.0 N is applied to 2.000 cm diameter piston, which is in contact with a closed container of water (density of water = 1,000 kg/m3). A second piston, with a diameter of 25.00 cm and at the same height as the first piston, is also in contact with the water. What force does the water pressure exert on the second piston? Multiple Choice 10,450 N. 8,450 N. 18,750 N. 9,150 N. 9,500 N.
A dump truck uses a hydraulic cylinder, as the drawing illustrates. When activated by the operator, a pump injects hydraulic oil into the cylinder at an absolute pressure of 2.91 x 106 Pa and drives the output plunger, which has a radius of 0.180 m. Assuming the plunger remains perpendicular to the floor of the load bed, find the torque that the plunger creates about the axis identified in the drawing. 3.50 m Output plunger Axis Load bed Input for hydraulic oil
A 1800 N balloon is filled with 2800m^3 of hydrogen having a specific weight of 1.5 N/m^3 A. What lift does the balloon exert at the earth surface? Unit weight of air is 12.50 N/m^3. B. What lift does the balloon exert at an elevation of 8km, assuming that the volume has increased 5%? Unit weight of air is 4.50 N/m^3. C. What lift does the balloon exert at an elevation of 16km, assuming that the volume has increased 10%? Unit weight of Air is 2.50 N/m^3.
8. An air-plane has an effective wing surface area of 12.0 m² that is generating the lift force. In level flight the air speed over the top of the wings is 61.0 m/s, while the air speed beneath the wings is 44.0 m/s. What is the weight of the plane?(The density of air is 1.29 kg/m?) X(165790.8 N