16-81 An engine block with a surface area measured to be 0.95 m² generates a power output of 50 kW with a net engine efficiency of 35%. The engine block operates inside a compartment at 157°C and the average convection heat transfer coefficient is 50 W/m².K. If convection is the only heat transfer mechanism occurring, determine the engine block surface temperature. Answer: 841°C

16-81 An engine block with a surface area measured to be 0.95 m² generates a power output of 50 kW with a net engine efficiency of 35%. The engine block operates inside a compartment at 157°C and the average convection heat transfer coefficient is 50 W/m².K. If convection is the only heat transfer mechanism occurring, determine the engine block surface temperature. Answer: 841°C

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

16.- Consider a person standing in a breezy room at 22°C. Determine the total rate of heat transfer from this person if the exposed surface area and the average outer surface temperature of the person are 1.6 m2 and 29°C, respectively, and the convection heat transfer coefficient is 10 W/m2.K.: (* l
Heat is removed from an L-shaped area by convection. The heat transfer coefficient is hand the ambient temperature is T. Surface temperature varies according to T(x) = To ex 0 a x 2a a where c and To are constants. Determine the rate of heat transfer from the area. a 2a
Q) An apple has been put into a freezer at (-18°C) to be cooled. Initially, the apple is at a uniform temperature of 17°C. The convection heat transfer coefficient on its surface is 6 W/m2°C. Assuming the apple as a sphere having a diameter of 10-cm and taking its properties as p = 750 kg/m³, p = 2850 J/kg°c, and k = 0.450 W/m°C, determine; (a) the center temperature of the apple in 45 minutes, (b) the actual amount of heat transfer from the apple, and (c) the final equilibrium temperature of the apple. Hint: consider the temperature is a function of location and time.
Required information A cylindrical fuel rod (k = 30 W/m K) of 2 cm in diameter is encased in a concentric tube and cooled by water. The fuel rod generates heat uniformly at a rate of 100 MW/m³, and the average temperature of the cooling water is 80°C with a conveçtion heat transfer coefficient of 2500 W/m K. The operating pressure of the cooling water is such that the surface temperature of the fuel rod must be kept below 200°C to avoid the cooling water from reaching the critical heat flux (CHF). The critical heat flux is a thermal limit at which a boiling crisis can occur that cause overheating on the fuel rod surface and lead to damage. T(r.) é sen = 100 MW/m³ 3. Cooling water Fuel rod D=D2 cm 2500 W/m2-K Determine the temperature at the centerline of the rod. (Round your answer to the nearest whole number) (You must provide an answer before moving to the next part.) 5 6 18°C Clear へロ註EN N
What is the approximate temperature difference between a hot plate and the surrounding air if the heat flux from the plate is 800 W/m2? Assume that the air is flowing past the surface with a velocity of 5 m/s giving a heat transfer coefficient of 20 W/(m2K).
asap
9- Consider a flat plate solar collector placed at the roof of a house. The temperatures at the inner and outer surfaces of glass cover are measured to be 28°C and 25°C, respectively. The glass cover has a surface area of 2.2 m and a thickness of 0.6 cm and a thermal conductivity of 0.7 W/m C. Heat is lost from the outer surface of the cover by convection and radiation with a convection heat transfer coefficient of 10 /m2 °C and an ambient temperature of 15°C. Determine the fraction of heat lost from the glass cover by radiation.
Q1- An industrial freezer is design to operate with an internal air temperature of -20 °C when the external air temperature is 25 °C and the internal and external heat transfer coefficient are 12 W m?/K and 8 W m?/ K, respectively. The walls of the freezer are composite construction, comprising of an inner layer of plastic (k= 1 W/m K, and thickness of 3 mm), and an outer layer of stainless steel (k=16 W/m K, and thickness of 1 mm). Sandwiched between these two layers is a layer of insulation material with k=0.07 W/m K. Find the width of insulation that is required to reduce the convection heat loss to 15 W/m?. Support the solution by drawing. (25mark)
16-90 An electric heater with the total surface area of 0.25 m² and emissivity 0.75 is in a room where the air has a temperature of 20°C and the walls are at 10°C. When the heater consumes 500 W of electric power, its surface has a steady temperature of 120°C. Determine the temperature of the heater surface when it consumes 700 W. Solve the problem (a) assuming negligible radiation and (b) taking radiation into consideration. Based on your results, comment on the assumption made in part (a). We Too, h FIGURE P16-90 Ts Α, ε Qconv Qrad Tw
Consider a long, insulated cable supplying power to a community. It is elevated in the air by using poles. The ambient air temperature is 20oC and the convective heat transfer coefficient is h = 20 W/m2.K. Radiation exchange between the cable surface and the environment can be neglected. Make your calculations considering per meter-length. The wire carries 500 Amp current and has a resistance of 0.0001 Ohm/m. The diameter of the solid core wire is 1.0 cm and has a thermal conductivity of k = 20 W/m.K The electrically insulating material covering the wire-core has a thickness of 0.5 cm with a thermal conductivity of k = 0.01 W/m.K a) What is the rate of heat loss from the cable to the environment in kW/meter? b) What is the outside surface (exposed to air) temperature of the cable? c) What is the temperature of the interface between the insulation sleeve and the core-wire carrying the electric power? If the sleeve material has to remain below 100 oC for the long term, would this…
Calculate the temperature in an unheated space (Tunc) adjacent to a conditioned room with three (3) common surface areas of 175-ft2, 190-ft2, and 210-ft² with an overall heat transfer coefficient of 0.21, 0.27, and 0.32 Btu/h-Ft2 °F, respectively. The surface areas of the unheated space exposed to the outdoors are 175-ft² and 210-ft² with corresponding overall heat transfer coefficients of 0.21 and 0.40 Btu/h- Ft².°F. The sixth (6th) surface is on the ground and can be neglected for this example as can be the effect of any outdoor air entering the space. Inside & outside design reference temperatures are 70°F & -10°F, respectively. Tunc = 37°F Tunc = 36°F Tunc = 30°F Tunc = 35°F
A furnace wall comprises three layers of thickness 250 mm, 100 mm, and 150 mm with thermal conductivities of 1.65, k and 9. W/m K respectively. The inside is exposed to gases at 1250 ˚C with convection of 25 W/m2K, and the inside surface is at 1100 ˚C, the outside surface air at 25 ˚C with convection of 12 W/m2K. Determine the overall heat transfer coefficient in W/m2-K to 2 d.p. ?