12.2 ASCE Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) provide provisions for determining design seismic force for buildings and other structures. Select the correct statement(s) from the following: • Design base shear is calculated using ASCE equations that account for site acceleration, building fundamental period, and type of lateral force-resisting system. • Ground acceleration parameters (SDS and SD1) vary for different regions, and they shall be taken from US Geological Survey (USGS) maps. • An Importance factor (1) is used to increase the seismic design forces for schools, hospitals, high-occupancy buildings and other critical facilities.

12.2 ASCE Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) provide provisions for determining design seismic force for buildings and other structures. Select the correct statement(s) from the following: • Design base shear is calculated using ASCE equations that account for site acceleration, building fundamental period, and type of lateral force-resisting system. • Ground acceleration parameters (SDS and SD1) vary for different regions, and they shall be taken from US Geological Survey (USGS) maps. • An Importance factor (1) is used to increase the seismic design forces for schools, hospitals, high-occupancy buildings and other critical facilities.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Calculate/plot the radial pressure and displacement curves for a 1.85 m radius tunnel subjected to a…

A: Given data: Radius of tunnel, R=1.85 m Hydrostatic stress = 20 MPa Concrete lining radius = 1.70 m…

Q: What four things must an analysis of a lateral load system consider according to the AISC code?

A: The things an analysis must consider for a lateral load system according to the AISC code are:

Q: Seismic Principle Candidate Questions. 7. Type of earthquake waves, list most destructive wave. 8.…

A: Sometimes the structure has to face different types of earthquake waves. The structure over this…

Q: of failure envelope ar ers through failure enve

Q: It is assumed that the fundamental period of reinforced concrete frame structure is located between…

Q: Explain the significance of the minimum residual stability requirements in the damaged condition…

A: Intact Stability 1. Original GM or metacentric height should not be less than 0.15 m.2. The right…

Q: 1. A soil anchor 12" in diameter is placed in soil having shear strength of 2.1 tons/sq. ft. The…

Q: Design spectra are based on the response spectrum for a single representative earthquake at the…

A: Design spectra is used to design a new structure based on response spectrums of an earthquake in…

Q: 1. What is the difference between pre-tensioning and posst-tensioning in terms of prestress…

A: As per guidelines we need to answer only 1st question so please repost rest questions separately

Q: Computations indicate that a planned building loading will cause the principal stresses in the soil…

A: Given: The major principle of stress is 4500 psf. The minor principle stress is 1500 psf. The angle…

Q: Find the building's Seismic Response Coefficie

A: This question is from structural dynamics.

Q: State the method to determine the N-value of soil and the normal N-value required for supporting…

A: Concept- N-Value of the soil- It is a very important parameter for the determination of the shear…

Q: Regarding geotextiles used in separation, what is the required burst pressure of a geotextile…

A: Given, Maximum size of the stone, Da= 75 mm Tire inflation pressure, Pt=1000 kPa Cumulative…

Q: Problem #2: Design a (One Way Slab) slab whose clear length is 20 ft x 12 ft which is subjected to a…

A: Clear length of a slab = 20 ft x 12 ft Live distributed load = 150 psf It is asked to Design a One…

Question

12.2 ASCE Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) provide provisions for determining
design seismic force for buildings and other structures. Select the correct statement(s) from the following:
Design base shear is calculated using ASCE equations that account for site acceleration, building fundamental period,
and type of lateral force-resisting system.
Ground acceleration parameters (SDS and SD1) vary for different regions, and they shall be taken from US Geological
Survey (USGS) maps.
An Importance factor (1) is used to increase the seismic design forces for schools, hospitals, high-occupancy buildings
and other critical facilities.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Use the ASCE 7 equations for building vibration period and base shear and calculate the design base shear for the following building. Building information: Building height:Location:Function:Total building weight:Structural system: 160-ft tallSanta Monica, CA (Seismic Design Category E)Hospital (Importance factor, I =1.5)7,400 kipsSteel eccentrically braced frame (R= 8)
QUESTION 40 1. Transient analysis and limit stability analysis mean the same thing and thus can be used interchangeably. True False QUESTION 41 1. Tension cracks would usually occur first on the ground surface thus indicating the onset of slope instability. True False QUESTION 43 1. The retaining wall worked as a barrier against excessive groundwater loss and safeguarded the buildings located behind it. True False QUESTION 30 1. The sea water level causes the groundwater table to fluctuate on site. True False
For each of the building properties listed below, identify which parameter from the base shear equations shall apply. Building occupancy and function Seismic Base Shear In accordance ASCE-7 code, buildings must be designed to withstand lateral forces that are generated during a severe earthquake. The minimum required design force is given in several equations. Design Base Shear, V= C, W Seismic response coefficient, C,, is the smaller value from two equations: In these equations: C₂ = C₂ < Sp! R Spy R Sor & Spare Seismic Acceleration Parameters from USGS maps is Importance Factor Tis Period of Vibration, (depends on building height & must be calculated) Ris Response Modification Factor from ASCE Table Wis the Effective Seismic Weight of the building. SD1 and SDs, seismic acceleration parameters R, response modification factor I, importance factor T, period None of these
Use the ASCE 7 equations for building vibration period and base shear and calculate the design base shear for the following building. Building information: Building height:Location:Function:Total building weight:Structural system: 160-ft tallSanta Monica, CA (Seismic Design Category E)Hospital (Importance factor, I =1.5)7,400 kipsSteel eccentrically braced frame (R= 8)
What do you means by the term unconsolidated–undrained (U–U) shear tests?
After the soil samples are taken and the soil properties determined, the engineer must design the foundation. It typically takes the engineer 4.75 days to design a foundation with a standard deviation of 0.83 days. Use this information and the information provided in Problem I to answer the following questions: a. What is the probability of completing all of the work (field sampling, testing, and design) within 43.5 days? b. The engineer completes the field sampling and testing in 36 days. What duration of the design work should be planned in order to ensure with 85% confidence that all of all of the work will be completed within 43.5 days?