12. Imagine a solar collector for hot tap water in a hot climate. De outdoor temperature is 22 degree Celsius. De tank of the solar collector is placed outside, and the cold water temperature to the collector is 20 degree Celsius. De water flow rate through the collector is 45 liter/hour. De collector is 2 [m2] and the average solar radiation in the time period considered is 1000 [W/m2]. What is the temperature of the hot water to the tank? The efficiency of the collector can be assumed to be 0.7 (we neglect the dependency to the water temperature) (multiple choice, one answer) 34 [OC] O 47 [OC] 54 [OC] 67 [OC]

12. Imagine a solar collector for hot tap water in a hot climate. De outdoor temperature is 22 degree Celsius. De tank of the solar collector is placed outside, and the cold water temperature to the collector is 20 degree Celsius. De water flow rate through the collector is 45 liter/hour. De collector is 2 [m2] and the average solar radiation in the time period considered is 1000 [W/m2]. What is the temperature of the hot water to the tank? The efficiency of the collector can be assumed to be 0.7 (we neglect the dependency to the water temperature) (multiple choice, one answer) 34 [OC] O 47 [OC] 54 [OC] 67 [OC]

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Feeding Rate (R) [g/h] 6 5 1 0 A B 0 1 U 2 3 E D F 4 5 6 7 8 9 Time (t) [h] 10 11 12 13 14 The feeding rate in grams per hour is displayed as a function of time in hours [h] for a bioreactor. Select the phrase that makes the following sentences true. Between points C and D, the feeding rate [Select ] Between points D and E, the feeding rate [Select] The mass of feed in grams [g] added to the bioreactor between points F and G is [Select ] The mass of feed added to the bioreactor between points E and F is zero The mass of feed added to the bioreactor between points H and I is [Select] grams [g].
Example 1.3: A cylindrical core having a radius 2.54 102 [m] and length of 0.3 [m], was flooded with brine at a steady rate of 1.100 [m³s¹], the differential pressure across the core was 10 [bar]. Calculate the absolute permeability of the core. Assume brine viscosity 0.001 [Pa.s].
An ideal gas flows through a horizontal tube at steady state. No heat is added, and no shaft work is done. The cross-sectional area of the tube changes with length and this causes the velocity to change. (a) Derive an equation relating the temperature to the velocity of the gas.(b) If nitrogen at 150 [°C] flows past one section of the tube at the velocity of 2.5 [m/s], what is the temperature at another section where its velocity is 50 [m/s]? Let Cp = 7/2R.
2. Determine the moment values about the wrist, elbow, and shoulder for a person holding a 5 [lb] weight in their hand with an out stretched arm at 35 [degrees] from a vertical reference frame. The dimensional values are SE= 11 [in]; EW = 10 [in]; WB = 2 [in] Shoulder, S 35* Elbow, E Wrist, W Ball, B
Air at a temperature of 26.85 ° C and a pressure of 200 kPa in a 1 m closed container has. Air at a temperature of 26.85 ° C is generated at 600 K by heat transfer from a reversible heat pump heated up to temperature. The heat pump takes heat from the surrounding environment at a temperature of 300 K. Heat Calculate the amount of work that needs to be supplied to the pump as [kJ].
Compute the amount of cooling water required to chill 300 kg of pineapple from 23.0C to 9.00C. The cooling water temperature increases from 1.00 to 6.50 C. [Cp,pineapple = 3.85 kJ/kg-C]
A freezer with dimensions of 4 m wide, 7 m long and 3 m high is under construction. The walls and ceiling are composed of 1.7 mm stainless steel (k = 15 W / [m ° C]), 10 cm thick foam insulation (k = 0.036 W / [m ° C]), a specific thickness of corkboard (k = 0.043 W / [m ° C]), and 1.27 cm thick wood (k = 0.104 W / [m ° C]). The inside of the freezer is maintained at -35 ° C. The ambient air outside the freezer is 32 ° C. The convective heat transfer coefficient is 5 W / (m K) on wooden walls and 2 W / (m² K) on stainless steel surfaces. If the outside air has a dew point of 29 ° C, calculate the thickness of the corkboard insulation that will prevent moisture condensation on the outer walls of the freezer. Calculate the heat transfer rate through the walls and ceiling of this freezer. Ignore heat transfer from floors and corners of buildings. a. Thickness of corkboard insulation = Answer cm. b. Heat transfer rate through walls and ceiling = Answer watts.
Houses .18 A deep geothermal system delivers 50000 [MWh] heat at 60 [oC] yearly. The average heating demand of a house in a new-built district equipped with floor heating is 10000 [kWh]. How many houses can be heated by this geothermal ?system 5 O 500 O 5000 50000 O
Suppose you're converting a bill of materials for machining feedstock from the British gravitational (U.S. system) of units to International System (SI) units. Your goal is to have all of the material quantities in kilograms. Your bill of materials lists values for required weights of brass rod in pounds. To convert to these values to kilograms you first you divide by gravitational acceleration in feet per second squared to get a mass in slugs, then convert slugs to kilograms using standard conversion factors. Group of answer choices True False