11. a heat pump using R-717 as a refrigerant operates between saturated temperature of 6 oC and 38 oC. the refrigerant is compressed isentropically from dry saturated and there is 6 K of under cooling in the condenser. Calculate P.F and the mass flow rate of refrigerant and the heat available per kW input. (8.8, 25.065 kg/hr, 8.8kW)

11. a heat pump using R-717 as a refrigerant operates between saturated temperature of 6 oC and 38 oC. the refrigerant is compressed isentropically from dry saturated and there is 6 K of under cooling in the condenser. Calculate P.F and the mass flow rate of refrigerant and the heat available per kW input. (8.8, 25.065 kg/hr, 8.8kW)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Refrigerant 22 is the working fluid in a Carnot vapor refrigeration cycle for which the evaporator temperature is -30°C. Saturated vapor enters the condenser at 36°C, and saturated liquid exits at the same temperature. The mass flow rate of refrigerant is 10 kg/min. Determine the quality of refrigerant at inlet of compressor,
The evaporator and condenser is isobaric with a net heat transfer 250 W in a vapor-compression refrigeration cycle. The cycle operates with R-134a working fluid at a steady state. The compressor's isentropic efficiency is at 60% with a high pressure of 16 bar and low pressure of 1 bar during the cycle. Solve for the mass flow rate, coefficient of performance, and draw the T-s diagram.
Q.13 A vapour compression refrigeration system using refrigerant F-12 is employed to produce 8640 kg of ice per day. The condensing and evaporating temperature of refrigcrant are 48°C and-20°C respectively. Saturated liquid leaves the condenser and saturated vapour leaves the evaporator. Compression is isentropic, water at 35°C is used to form the ice. The temperature of ice should be-8°C. Heat flow into the brine tank from surroundings may be taken as 10% of total heat absorbed from water to form ice. Determine the power required to drive the compressor. Take specific heat of ice 2.26 kJ/kg-K. Latent heat of ice = 335 kJ/kg. Specific heat of water = 4.2 kJ/kg-K. The following data may be used: %3D Temp. Pressure Enthalpy Entropy °C bar kJ/lg kJ/kg-K Liquid Vapour Liquid Vapour 48°C 11.64 82.83 205.83 0.2973 0.6802 -20 1.51 17.82 178.74 0.0731 0.7087 Specific heat of vapour 0.82 kJ/kg %3D
An r-134a refrigerator operates a simple vapor compression cycle (SVCC). The evaporatoroperates at -10 °C, while the condenser operates at 1 MPa. R-134a flows around the system at 10 g/s.a. Graph the cycle in a P-h diagram and calculate the temperature at the exit of the compressor, assuming it is 100% isentropicallyefficient.b. Calculate the power required by the compressor (in W) and the cooling effect of the refrigerator (in kW) c. Compute for the COP of the system. What is its percent difference from the reversible efficiency?
In a R-134a based refrigeration system the cycle operates in the temperature range of 40°c and - 20°c. Find COP of the system if the vapor is dry and saturated .hile entering the compressor. Assume mass flow rate of refrigerant is 1 kg/s.
Q.5 A standard vapor compression cycle uses R134a as the refrigerant. The condensing and evaporating temperatures are 40°C and 0°C respectively. The isentropic efficiency of the compressor is 80%. The refrigerant flow rate is 0.35 kgs. Calculate (i) the heat absorption rate, (ii) the work input to the compressor, and (iii) the COP of the cycle. Answers: (i) 49.7 kW, (ii) 11.33 kW, (iii) 4.39| Nihal E wijeysuuга Heabins principles of ventilation air conditio win and
ercise 6 6.1 A surface condenser is fitted with separate air and condensate outlets. A portion of the cooling surface is screened from the incoming steam and the air is passes over these screened tubes to the air extraction and becomes cooled below the condensate temperature. The condenser receives 20 000kg/hr of dry saturated steam at 36.2°C. At the condensate outlet the temperature is 34.6°C TK and at the air extraction the temperature is 29°C. The volume of air and vapour leaving the condenser is 3.8m3/min. Assume constant pressure throughout the condenser, calculate: 6.1.1 the mass of air removed per 10 000kg of steam (2.63kg); 6.1.2 the mass of steam condensed in the air cooler per minute (0.5kg/min)%3B 6.1.3 the heat rejected to the cooling water (13451kW).
An ammonia ice plant produces ice from water at 30°C to ice at -5°C. It works on standard vapour compression cycle, dry saturated conditions at compressor inlet. The enthalpies at compressor inlet and condenser exit are 1443.9 kJ/kg and 366.1 kJ/kg. Mass flow rate of the refrigerant is 180 kg/h. The ice produced is. tons per day. Specific heat of water = 4.186 kJ/kgK; Specific heat of ice = 1.94 kJ/kgk Latent heat of water at 0°C = 335 kJ/kgK
Q.6 A vapor compression cycle uses R134a as the refrigerant . The vapor condenses at 40 degrees * C and is subcooled to 35 degrees * C before entering the expansion valve . The evaporating temperature is - 5 degrees * C . The vapor leaving the evaporator is superheated to 5 degrees * C at entry to the compressor . The heat absorption rate is 13 kW and the compression process is isentropic . Calculate (i) the refrigerant flow rate, (ii ) the work input , and ( iii ) the COP . Answers: () 0.0837kg * s ^ - 1 , (ii) 2.63 kW , (iii) 4.95
Que: The temperature in the evaporator of a home air conditioner using R134A as the refrigerant is 261 K, and the temperature in the condenser is 325 K. The refrigerant leaves the evaporator at 12 K above saturation temperature and its mass flow rate is 22 kg/h. When a compressor with 80% efficiency is used; a) The power of the compressor (kW), b) the cooling capacity of the air conditioner (kW), and c) Find the coefficient of performance. 3. 325 4, 261 Qu 2.
11. A vapour compression refrigeration plant uses ammonia. The compressor takes vapour from the evaporator at 207.7kPa and -8°C and delivers to the condenser at 1470kPa and 113°C. The temperature of the liquid leaving the condenser at a rate of 12kg/min is 38°C. Calculate: (a). the dryness of the refrigerant entering the evaporator (b). the cooling load (c). the power to the compressor (d). coefficient of performance (e). plant capacity
Question 2 of 4 - / 25 An office building requires a heat transfer rate of 30 kW to maintain theinsidetemperature at 21°Cwhen theoutsidetemperature is O°C. Avapor-compression heat pump with Refrigerant 134a astheworkingfluid isto beused to provide the necessary heating. The compressoroperates adiabatically with an isentropic efficiency of 82%. Determine appropriate evaporator and condenser pressures of a cyclefor this purpose assuming ATcond = ATevap = 10°C, as shown in the T-sdiagram. The refrigerantexitstheevaporator assaturated vapor and exitsthecondenser as saturated liquid at the respective pressures. AT cond Outside air 21°C 0°C Inside air ATent Condenser Evaporator Expansion valve Compressor Step 1 Determinethe mass flow rate of refrigerant, in kg/s. m = kg/s Attempts: unlimited Submit Answer Save for Later Using multiple attempts will impact your score. 5% score reduction after attempt 2 Step 2 The partsof thisquestion must becompleted in order. This partwill be availablewhen…