10. A winter air conditioning system maintains a building at 210C and 40% RH. The outdoor conditions are OoC (DBT) and 100% RH. The sensible load load on the building is 100 kW, while the latent heating load is 25 kW. In the air conditioning system, 50% of the outdoor air (by mass) is mixed with 50% of the room air. The mixed air is heated in a pre-heater to 250C and then required amount of dry saturated steam at 1 atm. pressure is added to the pre-heated air in a humidifier. The humidified air is then heated to supply temperature of 450C and is then supplied to the room. Find a) The required mass flow rate of supply air, b) Required amount of steam to be added, and c) Required heat input in pre-heater and re-heater. Barometric pressure 1atm..

10. A winter air conditioning system maintains a building at 210C and 40% RH. The outdoor conditions are OoC (DBT) and 100% RH. The sensible load load on the building is 100 kW, while the latent heating load is 25 kW. In the air conditioning system, 50% of the outdoor air (by mass) is mixed with 50% of the room air. The mixed air is heated in a pre-heater to 250C and then required amount of dry saturated steam at 1 atm. pressure is added to the pre-heated air in a humidifier. The humidified air is then heated to supply temperature of 450C and is then supplied to the room. Find a) The required mass flow rate of supply air, b) Required amount of steam to be added, and c) Required heat input in pre-heater and re-heater. Barometric pressure 1atm..

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What are the Difference of a Open Heater to a Closed heat exchanger?
subject (thermo 2)
The following image describe a single-flash geothermal power plant. We have the follow informations about the system: The flash chamber (throttling valve) is a isenthalpic device The system is adiabatic The power generated by the turbine is 10kW The pressure and temperature at point 4 are 50 kPa and 100°C respectively The pressure at separator is 500 kPa The separator has the function of separating the phases of a saturated mixture The mass that exits the system through the separator is 5 times the mass that exits the turbine. The pressure at point 1 is 1 MPa If all the information is sufficient, fill in the table below and plot all the points on a T x v graph.
A refrigeration unit with COP = 3.8 is being used to remove heat from a particular machine by 0.42 kg/s of water (C, = 4.18 kJ/kg.K) at 20 °C that is chilled from 40 °C as shown in the Figure. What is the power input (in kW) to the refrigeration unit? Select one: O 11.15 1 2 10.97 9.24 REF TH O 13.26 QH O 14.63 O 12.32
In the closed cycle Ocean Thermal Energy Conversion system. I. surface water of the ocean is used to eaporate the working fluid IL the deep water of the ocean is used as working fluid 日. I and II are false O b. I and I are true Oc. Onlyl is true O d. Only II is true
Can you also show the T-S and P-H diagram? REF134A A Single Stage Vapor Compression (SSVC) refrigeration system has a cooling capacity of 6 tons. The discharge of the evaporator is at -20°C & 0.1 MPa and the discharge of the condenser is at 30°C & 1.0 MPa. Determine the following: (a) the COP of the system, (b) the Energy Efficiency Ratio in kJ/hr/W, (c) the HP/ton of the system, (d) the Refrigerating Efficiency of the system.
A heat machine works according to a Carnot cycle with a 75% meltout Calculate the COP value of a cooling machine that works according to the same cycle. TL=0 °C.
A R22 refrigeration system is used to operate between 45degC and -30degC. The total cooling capacity is 350 kW. a. What is the ideal COP of the system? b. What is the heat rejected by the system? c. What is the total power consumed by the system? There are several steps made to improve the performance of the system. What happens to the COP, heat rejected and power consumed by the system when: d. For the same evaporator and condenser pressure, the temperature at the entrance of the compressor is -20degC, and the inlet to the expansion valve is subcooled by 5degC. Due to the wide temperature gap, it is decided to use a two-stage refrigeration system using flash gas removal and optimal intercooling operation in a flash chamber. What happens to the COP, heat rejected and power consumed by the system when: e. Having a low pressure and high-pressure compression. f. Two evaporators and two compressors, with the lower temperature evaporator having a cooling capacity of 225 kW. Notes: The…
A power plant was analysed based on Carnot cycle, the evaporator supplie 553 kJ of heat per cycle at 522°C and condenser cooling fluid was maintained1- at 26°C. Determine the thermal efficiency of this Carnot engine in percentage? Provide answer to 1 decimal place and insert the unit symbol. 1 °C is 273K in this question if required.