Homework Help is Here – Start Your Trial Now!
Engineering
Mechanical Engineering
1. Tires Table 12.1 Principal Chassis Tuning Items a. Different designs, sizes and front/rear combinations b. Tire pressures/tire temperatures c. Stagger (different tire circumference) frequently used across an axle d. Rim widths and offsets (possible track change) e. Static alignment (toe, camber, caster) 2. Static Wheel Loads a. Longitudinal CG location (shifting ballast) b. Lateral CG location (shifting ballast) c. Wedge, diagonal weight jacking, or warp (changes in spring preload) 3. Lateral Load Transfer Distribution (LLTD) a. Roll couple distribution front to rear b. Roll center heights (front and/or rear) c. Ride spring rates d. Anti-roll bars or Z-bars e. Progressive rate springs, linkages and bump stops (Notes: Coupling occurs with ride height changes when progressive rate linkages are used. Cockpit adjustment of LLTD may be provided.) 4. Ride Height and Body Attitude (Roll and Pitch) a. Wheel orientation changes via suspension geometry • Camber curves • Ride (bump)/roll steer • Anti-dive/squat • Steering geometry • Wheel travel b. Aerodynamics (function of ride height and body attitude) Table 12.2 Additional Principal Chassis Tuning Items 1. Aerodynamic Forces and Moments a. Lift/downforce b. Drag c. Pitching and yawing moments (Note: As affected by size, shape, angle of wings, car shape/underbody, internal air flow, etc.) 2. Brakes a. Distribution, front to rear b. Cooling 3. Driveline a. Gearing b. Differential(s), type and functional behavior c. Spool d. Engine performance characteristics 4. Dampers 5. Driver/Vehicle Interface a. Steering ratio b. Pedal forces and movements c. Force feedbacks (kickback, oscillations) 6. Compliances a. Chassis and suspension stiffness maximized by design b. Suspension compliances are not adjustable for tuning (as in road cars)

1. Tires Table 12.1 Principal Chassis Tuning Items a. Different designs, sizes and front/rear combinations b. Tire pressures/tire temperatures c. Stagger (different tire circumference) frequently used across an axle d. Rim widths and offsets (possible track change) e. Static alignment (toe, camber, caster) 2. Static Wheel Loads a. Longitudinal CG location (shifting ballast) b. Lateral CG location (shifting ballast) c. Wedge, diagonal weight jacking, or warp (changes in spring preload) 3. Lateral Load Transfer Distribution (LLTD) a. Roll couple distribution front to rear b. Roll center heights (front and/or rear) c. Ride spring rates d. Anti-roll bars or Z-bars e. Progressive rate springs, linkages and bump stops (Notes: Coupling occurs with ride height changes when progressive rate linkages are used. Cockpit adjustment of LLTD may be provided.) 4. Ride Height and Body Attitude (Roll and Pitch) a. Wheel orientation changes via suspension geometry • Camber curves • Ride (bump)/roll steer • Anti-dive/squat • Steering geometry • Wheel travel b. Aerodynamics (function of ride height and body attitude) Table 12.2 Additional Principal Chassis Tuning Items 1. Aerodynamic Forces and Moments a. Lift/downforce b. Drag c. Pitching and yawing moments (Note: As affected by size, shape, angle of wings, car shape/underbody, internal air flow, etc.) 2. Brakes a. Distribution, front to rear b. Cooling 3. Driveline a. Gearing b. Differential(s), type and functional behavior c. Spool d. Engine performance characteristics 4. Dampers 5. Driver/Vehicle Interface a. Steering ratio b. Pedal forces and movements c. Force feedbacks (kickback, oscillations) 6. Compliances a. Chassis and suspension stiffness maximized by design b. Suspension compliances are not adjustable for tuning (as in road cars)

Elements Of Electromagnetics
Elements Of Electromagnetics
7th Edition
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Sadiku, Matthew N. O.
ChapterMA: Math Assessment
Section: Chapter Questions
Problem 1.1MA
See similar textbooks
icon
Related questions
Question
100%

Summarize chassis configuration and adjustments for race cars emphasizing the data from the tables below:

1. Tires Table 12.1 Principal Chassis Tuning Items a. Different designs, sizes and front/rear combinations b. Tire pressures/tire temperatures c. Stagger (different tire circumference) frequently used across an axle d. Rim widths and offsets (possible track change) e. Static alignment (toe, camber, caster) 2. Static Wheel Loads a. Longitudinal CG location (shifting ballast) b. Lateral CG location (shifting ballast) c. Wedge, diagonal weight jacking, or warp (changes in spring preload) 3. Lateral Load Transfer Distribution (LLTD) a. Roll couple distribution front to rear b. Roll center heights (front and/or rear) c. Ride spring rates d. Anti-roll bars or Z-bars e. Progressive rate springs, linkages and bump stops (Notes: Coupling occurs with ride height changes when progressive rate linkages are used. Cockpit adjustment of LLTD may be provided.) 4. Ride Height and Body Attitude (Roll and Pitch) a. Wheel orientation changes via suspension geometry • Camber curves • Ride (bump)/roll steer • Anti-dive/squat • Steering geometry • Wheel travel b. Aerodynamics (function of ride height and body attitude) Table 12.2 Additional Principal Chassis Tuning Items 1. Aerodynamic Forces and Moments a. Lift/downforce b. Drag c. Pitching and yawing moments (Note: As affected by size, shape, angle of wings, car shape/underbody, internal air flow, etc.) 2. Brakes a. Distribution, front to rear b. Cooling 3. Driveline a. Gearing b. Differential(s), type and functional behavior c. Spool d. Engine performance characteristics 4. Dampers 5. Driver/Vehicle Interface a. Steering ratio b. Pedal forces and movements c. Force feedbacks (kickback, oscillations) 6. Compliances a. Chassis and suspension stiffness maximized by design b. Suspension compliances are not adjustable for tuning (as in road cars)
Transcribed Image Text:1. Tires Table 12.1 Principal Chassis Tuning Items a. Different designs, sizes and front/rear combinations b. Tire pressures/tire temperatures c. Stagger (different tire circumference) frequently used across an axle d. Rim widths and offsets (possible track change) e. Static alignment (toe, camber, caster) 2. Static Wheel Loads a. Longitudinal CG location (shifting ballast) b. Lateral CG location (shifting ballast) c. Wedge, diagonal weight jacking, or warp (changes in spring preload) 3. Lateral Load Transfer Distribution (LLTD) a. Roll couple distribution front to rear b. Roll center heights (front and/or rear) c. Ride spring rates d. Anti-roll bars or Z-bars e. Progressive rate springs, linkages and bump stops (Notes: Coupling occurs with ride height changes when progressive rate linkages are used. Cockpit adjustment of LLTD may be provided.) 4. Ride Height and Body Attitude (Roll and Pitch) a. Wheel orientation changes via suspension geometry • Camber curves • Ride (bump)/roll steer • Anti-dive/squat • Steering geometry • Wheel travel b. Aerodynamics (function of ride height and body attitude) Table 12.2 Additional Principal Chassis Tuning Items 1. Aerodynamic Forces and Moments a. Lift/downforce b. Drag c. Pitching and yawing moments (Note: As affected by size, shape, angle of wings, car shape/underbody, internal air flow, etc.) 2. Brakes a. Distribution, front to rear b. Cooling 3. Driveline a. Gearing b. Differential(s), type and functional behavior c. Spool d. Engine performance characteristics 4. Dampers 5. Driver/Vehicle Interface a. Steering ratio b. Pedal forces and movements c. Force feedbacks (kickback, oscillations) 6. Compliances a. Chassis and suspension stiffness maximized by design b. Suspension compliances are not adjustable for tuning (as in road cars)
AI-Generated Solution
AI-generated content may present inaccurate or offensive content that does not represent bartleby’s views.
steps

Unlock instant AI solutions

Tap the button
to generate a solution

SEE SOLUTION
Similar questions
  • SEE MORE QUESTIONS
Recommended textbooks for you
Elements Of Electromagnetics
Elements Of Electromagnetics
Mechanical Engineering
ISBN:
9780190698614
Author:
Sadiku, Matthew N. O.
Publisher:
Oxford University Press
Mechanics of Materials (10th Edition)
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:
9780134319650
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:
9781259822674
Author:
Yunus A. Cengel Dr., Michael A. Boles
Publisher:
McGraw-Hill Education
Control Systems Engineering
Control Systems Engineering
Mechanical Engineering
ISBN:
9781118170519
Author:
Norman S. Nise
Publisher:
WILEY
Mechanics of Materials (MindTap Course List)
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:
9781337093347
Author:
Barry J. Goodno, James M. Gere
Publisher:
Cengage Learning
Engineering Mechanics: Statics
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:
9781118807330
Author:
James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:
WILEY
SEE MORE TEXTBOOKS