1. Figure 2 shows a cross section of an improved river channel for flood protection. At what flow rate would the levees be overtopped? Assume the channel has a uniform longitudinal slope of 0.008 and that Manning's n is 0.06 and 0.04 for the overbank and the main channel, respectively. 3m4 60m 4.5m 4.5 m 60 m 4.5 m 60 m

1. Figure 2 shows a cross section of an improved river channel for flood protection. At what flow rate would the levees be overtopped? Assume the channel has a uniform longitudinal slope of 0.008 and that Manning's n is 0.06 and 0.04 for the overbank and the main channel, respectively. 3m4 60m 4.5m 4.5 m 60 m 4.5 m 60 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A channel is 6.00 m wide at depth and n=0.005. According to these data, find: a. The average normal slope for a flow of 18 m3 /s and a depth equal to 1.30 m. b. The critical slope for a depth of 1.20 m and the expense corresponding to said depth and slope
In a rectangular channel two reaches A and B in series, with reach A being upstream of reach B, have the following characteristics:
All information given... Please solve clearly
3 A triangular channel with apex angle 60° is carrying a uniform flow of 4.25 m/s with a depth of flow of 1.45 m. Calculate the slope required to sustain the flow if the manning's roughness coefficient is 0.013.
Question 21 of 23 An open channel is to be designed to carry 1 m3/s at a slope of 0.0065. The channel material has n = 0.011. What is the optimum depth for a rectangular section? Select the correct response: 0.48 0.46 0.43 0.69
A triangular threshold is used to control the water depth which tends to be constant upstream of an open channel. Water flows on a V-notch weir with = 90^o and the magnitude of gravity is 9.81 m/s^2. What is the water discharge upstream of the threshold when conditions are normal with a water level of 0.24 m and during a flood with a water level of 1 m?
2. A 1.50 m diameter circular channel flowing at maximum velocity is to be replaced by a trapezoidal channel of the most efficient section with one side slope at 2V:3H and the other at 4V:3H. The two channels have the same longitudinal slopes of 0.010 and the same roughness coefficient, n = 0.030. Determine the dimensions of the trapezoidal channel using Manning's equation. need complete solution with illustrations
At what depth will water flow in a 4-m wide rectangular channel if n=0.018 so 0.0009 and Q=7 meter cube/sec
Question: The project flow rate determined according to the stream yield will be transmitted through a rectangular channel in the shape of Q = 10 m3 /s. The Manning coefficient was determined as n = 0.04 according to the covering material of the channel and the longitudinal base slope of the channel was determined as 10 = 0.0015 according to the topographic characteristics of the land. Determine the channel bottom width (B) and flow depth (h) with the concept of the most appropriate cross section. h В
A trapezoidal channel having side slopes of 1:1 and bed slope of 1 in 845 is required to carry a discharge of 211.25m3/min. Find the dimensions of the channel for minimum cross-section. Take Chezy’s constant as 50