1. Air at a rate of 1000cfm is cooled from 80°Fdb and 70°Fwb until it is saturated at 5S'F. Determinethe amount of maisture removed (Ib/min), sensible heat removed (BTU/min), total heatremoved (BTU/min), and the sensible heat factor.2. Outdoor air initially at 30°Cdb and 25°Cwb, is mixed with room air at 22°C and 50%RH. Themixture is to cansist of 75% room air and 25% outdoor air. Determine the resulting dry bulbtemperature and wet bulb temperature.

Answered: Image /qna-images/answer/afdd12d6-1b7d-4cbc-b33a-768264ca3a3c.jpg

1. Air at a rate of 1000cfm is cooled from 80°Fdb and 70°Fwb until it is saturated at 55°F. Determi the amount of maisture removed (Ib/min), sensible heat removed (BTU/min), total heat removed (BTU/min), and the sensible heat factor. 2. Outdoar air initially at 30°Cdb and 25'Cwb, is mixed with room air at 22°C and 50%RH. The mixture is to consist of 75% room air and 25% outdoor air. Determine the resulting dry bulb temperature and wet bulb temperature.

1. Air at a rate of 1000cfm is cooled from 80°Fdb and 70°Fwb until it is saturated at 55°F. Determi the amount of maisture removed (Ib/min), sensible heat removed (BTU/min), total heat removed (BTU/min), and the sensible heat factor. 2. Outdoar air initially at 30°Cdb and 25'Cwb, is mixed with room air at 22°C and 50%RH. The mixture is to consist of 75% room air and 25% outdoor air. Determine the resulting dry bulb temperature and wet bulb temperature.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

14.An office is occupied by 30persons who each produce 58 kW of sensible heat and 0.1 kg/h of moisture. The office is to be maintained at 22 oC and 50% RH. Conditioned of supply air at 15 oC DBT to meet the sensible and laten loads. What is the SHR to meet the load, what must the humidity ratio and mass flow rate of supply air.
There are 300 cubic meter/min of atmospheric air initially at 25 C wet bulb temperature and 60 % RH flowing thru air duct header junction mixed with 400 cubic meter/min of cold air at 18 C dry bulb temperature and 10 C wet bulb temperature. After the adiabatic mixing, determine for the mixture:a) relative humidity b) specific humidityc) dewpoint temperatured) plot the process on the psychrometric chart and label completely
Q4: moist air pass on cooling coil at 20 °C DBT and 70% RH and then exit at 90% RH if dew point for device 7°C calculate B.F. & C.F. *
Moist air initially at T1 = 140°C, p1 = 4 bar, and φ1 = 62% is contained in a 2.0-m3 closed, rigid tank. The tank contents are cooled to T2 = 35°C. a) Determine the temperature at which condensation begins, in °C. (i got 121.2 C which is correct) b) Determine the heat transfer, in kJ.
An air-conditioning system to be installed in a factory with sensible and latent cooling loads of 175 KW and 65 KW, respectively. Assume that the relative humidity of supply air is 90%. The inside state is at 21 °C DB and 70% RH. What is the approximate required dry-bulb temperature in °C of the supply state of air? Select one: O a. 17 b. 16 O c. 18 O d. 14.5 Oe. 14 L
PROBLEM: IIC - 12 BOOK: ENGINEERING THERMOFLUIDS, M. MASSOUD
Q2/ In AC system, 540 L/s of the outdoor air at 32C db, 23C wb mixes with 2850 L/s of the return air at 24C db, 50% RH. The mixture cools through the cooling load and leave it at 90% RH. If the room SHF is 70%. Calculate: 1. Conditions of the air leaving the coil. 2. Cooling coil capacity. 3. Sensible load, latent load and total load of the room.
H.W: - Steam at 7 bar & relative humidity 0.08 throttle to 0.05 bar, determine the steam condition after throttle.
Need asap show complete solution
Q1: Moist air at 40°CDBT, 20°CWBT, and standard atmospheric pressure is humidified adiabatically to 25 CDBT and 70% RH. Find the amount of moisture and heat added per Kg of air. (answer without using of psychrometric chart). Q2: A room is to be maintained at 22°C db and 50%RH has total heat loss of 7.5 kW of which 80% is sensible heat, when outdoor at 5 °C and 80% RH. If the design difference between supply and room air temperature is 10°C DBT and 50% fresh air, find the capacities of heating coil, and humidifier used a tap water at 10 "C. Q3: A room is maintained at 22°C and 50%RH has a wall consist of common brick finished internally with gypsum plaster and externally with 15mm cement plaster. The outside conditions are 2°C, 75% RH. Find the thickness of common brick required for preventing moisture condenses on the wall.
Gas-Vapor Mixtures (Properties of atmospheric air) 20. Find the humidity ratio of an air that has tdb = 27 °C and twb = 20 °C with arelative humidity of 55%. (Use PB = 100 KPa)a. 0.0124 lbv/lbab. 0.24 lbv/lbac. 0.133 Kgv/Kgad. 0.0133 Kgv/Kga
! Required information Problem 14.095 - Evaporative Swamp Cooler NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air enters an evaporative cooler at 1 atm, 40°C, and 20 percent relative humidity at a rate of 7 m³/min, and it leaves with a relative humidity of 90 percent. Use data from the psychrometric chart. 1 atm 40°C 20% Air Water mw K K Humidifier √2=90% Problem 14.095.b - Evaporative Swamp Cooler Determine the required rate of water supply to the evaporative cooler. The required rate of water supply to the evaporative cooler is kg/min.