Answered: 1. A force of 5000N is applied… | bartleby

Related questions

Question

1. A force of 5000N is applied outwardly to each end of a
5 m long rod with a radius of 34 cm and a Young's
modulus of 125×10' N/m². The elongation of the rod is:

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

A man with a mass of 68.3 kg stands on one foot. His femur has a cross-sectional area of 8.00 cm2 and an uncompressed length 50.4 cm. Young’s modulus for compression of the human femur is 9.40 × 109 N/m2. What is the fractional length change of the femur when the person moves from standing on two feet to standing on one foot?
80. Between each pair of vertebrae in the spinal column is a cylindrical disc of cartilage. Typically, this disc has a radius of about 3.0 X 10-² m and a thickness of about 7.0 x 10-3 m. The shear modulus of cartilage is 1.2 × 10' N/m². Suppose that a shearing force of magnitude 11 N is applied parallel to the top surface of the disc while the bottom surface remains fixed in place. How far does the top surface move relative to the bottom surface?
Ehulakah.hsh
Consider a square-faced beam supporting a section of a building. a) Before installation, the length of the beam is found to be l0 = 15.02 m (figure a). After installation and construction, the length is remeasured and found to be l = 14.98 m (figure b). Determine Young's Modulus Y in N/m2 for the beam if it supports a mass m = 35000 kg and has a side length d = 1.9 m. b) Suppose that after the beam is installed it needs to be repaired. The weight it supports is removed and replaced with a new mass m2 (figure c). After the new mass is supported, the side length is remeasured and found to be larger with a difference of Δd. Assuming that this side length deformation is uniform and small, write an expression for determining Poisson's ratio v for this beam if its Young's modulus Y is known.
7. A wire of length 6.5 m with a cross-sectional area of 0.14 cm2 stretches by 4.5 mm when a load of 0.800 kN is hung from it. What is the Young's modulus for this wire?
A steel rod has length 60.3 cm and radius 2.20 cm. An aluminum rod has length 20.0 cm and radius 2.20 cm. The rods are joined end to-end. When compressive forces of magnitude 5.40 are applied to the ends, by how much does the total length of the rods decrease? Young's modulus of steel is 200 * 10 ^ 11 * N / (m ^ 2) and Young's modulus of aluminum is 700 * 10 ^ 10 * N / (m ^ 2) m