Lab Report 7

Consider the RC circuit in Figure 2 below. Assuming the switch has been open for a long time before it is closed, fill in a table providing the current through each component and the voltage across each component immediately after the switch is closed, and a very long time after the switch is closed. Next, figure out the time constant for the circuit. (Hint: Assign currents to each branch. Set up the necessary KVL and KCL equations. Eliminate all but one variable to get an equation for just one of the currents. You shouldn’t have to solve this equation to recognize the time constant!)

Hello I need help solving this for the left and right side of this circuit. I have also provided a picture for reference.

With V1, voltage peak to peak is 10 volts, R1=200 Ohm, R2=1000 Ohm and C1= 300 nF. Find Vx, voltage across the the capacitor, C1 and R2 when the frequency is 1000 Hz and 10000 Hz

In general, the greater the absolute value of the impedance in a circuit:A. The greater the flow of alternating current.B. The less the flow of alternating current.C. The larger the reactance.D. The larger the resistance.

I need help understanding this question, what does this question is talking about

Q4

Kindly answer all of the questions please, I will rate you with like/upvote. Please answer all of the questions. Thank you so much.

Given the zener voltage at 9V and the zener power at 1W, what is the range of allowable values of Iz (operating values). Choices: 0.11A 22mA to 89mA 9A 0.11A to 9A Plss show complete solution

Circuits: What is the output voltage Vo? Here Vin is a 5 volt sine wave. When I simulated this circuit on CircuitLab it kept saying 5 volts sine wave, so am I wrong or is this software wrong?

need part a, b and c asap i willl give you upvote

3. The secondary voltage can rise above its rated value when the load is a. resistive. b. capacitive. C. inductive. d. an RL series combination.

Please show you detailed solution Number 10 A voltage of 250 volts at 50 Hz is impressed on a circuit having a 60-ohm resistor, 35-?F capacitor, and a 0.25-henry inductor in series. Determine power factor. A. 0.979 C. 0.924 B. 0.862 D. 0.707

A utility company plans to connect a total of 20uF of capacitance to a 7200 volt line. To make this connection four capacitors will be connected in series. What is the capacitance of each capacitor? Answer is 80uF. What is the minimum AC voltage rating of each capacitor? Answer is 1200 volts. What is the current flow through the circuit? And what is the minimum kVAR rating of each capacitor?