Unit 1 Milestone 6

What is ampere circuital law?

i need the answer quickly

6) Build an Arduino code that has keypad, LCD display. In this code you are required to: (Void Setup and Loop only) 1- Show "Hello Ardunio" blinking on LCD display with delay 1sec when pushing key I from the keypad and the LED is OFF. 2- Make a LED blinking with delay 1sec when pushing key 2 from the keypad and the LCD display is empty 7)An image of 250x250 elements (pixels) what is the memory size of the image if: a)Unit 8 b) Unit 16 c) Black & Whi 8) The game port register is used for two different purposes that are: 1- 2- 9) What is the FPGA device? 10) chose the correct answer for the following: 1- What is a result of connecting two or more switches together? a) The size of the broadcast domain is increased. b) The number of collision domains is reduced. b) The size of the collision domain is increased. c)The number of broadcast domains is increased.

Answer please.

Refer to the National Electrical Code® or the working drawings when necessary. Where applicable, responses should be written in complete sentences. For problems 1 and 2, six luminaires, similar to Style E used in the Commercial Building, are to be installed in a room that is 12 ft x 18 ft (~3.7 m x ~5.5 m) with a 9 ft (2.8 m) floor-to-ceiling height. The spacing ratio for the luminaire is 1:0. 1. The maximum distance that the luminaires can be separated and achieve uniform illuminance is ft ( m). For problems 2-5, two luminaires, 8 ft (2.5 m) and 4 ft (1.2 m) in length with dimensions as shown in Figure 15-7, are to be installed in tandem (end to end). The end of the long luminaire is to be 2 ft (600 mm) from the wall. 2. The center of the outlet box should be roughed in at ft ( m) from the wall. 3. The first support should be installed at the wall. ft ( m) from 4. The second support should be installed at from the wall. ft ( m) 5. The final support should be installed at the wall. ft…

Hi for case 3 is explain on which question ? either (a) positive or negative or for question (b) pls assist

Please write me the correct multiple choice and a short explanation. Thanks in advance.

4. Do some search about the functionality of Airport Metal Detectors. Explain your answer in a paragraph.

The hole on the drawing below is required to be perpendicular to the bottom surface and centrally located on the plate regardless of the size of the feature and regardless of the sizes of the datum features. In order of precedence, which datum features are missing in the feature control frame? (select all correct answers) Ø2.505 -2.510 0.005 E C A B Odatums A, D, E Odatums A, D Odatum A O datums D, E, A O datums A, E, D 1 I 6.00 4.00 1.00

Please Solve these two questions for me.

Explain briefly about the the circuit diagram and explanation of the analysis of equations.