For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model. Concept Introduction: Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR). VSEPR Theory: As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows, The first step is to draw the correct Lewis structure for the molecule. Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined. Finally, the geometry is predicted by using the orientation of atoms. The molecules with considering the domains of type AB 2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB 3 will have shape like trigonal planar, type AB 4 will have shape like tetrahedral or square planar, type AB 5 will have trigonal bipyramidal and AB 6 will have shape like octahedral respectively. Lewis structure for any molecule is drawn by using the following steps, First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it. Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell. Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents. To predict : The geometry for the given molecule.

Question

Want to see the full answer?

Answer 1

Question

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Students have asked these similar questions

my ccc edu - Search X Quick Access X D2L Homepage - Spring 2025 x N Netflix X Dimensional Analysis - A x+ pp.aktiv.com Q ☆ X Question 59 of 70 The volume of 1 unit of plasma is 200.0 mL If the recommended dosage for adult patients is 10.0 mL per kg of body mass, how many units are needed for a patient with a body mass of 80.0 kg ? 80.0 kg 10.0 DAL 1 units X X 4.00 units 1 1 Jeg 200.0 DAL L 1 units X 200.0 mL = 4.00 units ADD FACTOR *( ) DELETE ANSWER RESET D 200.0 2.00 1.60 × 10³ 80.0 4.00 0.0400 0.250 10.0 8.00 & mL mL/kg kg units/mL L unit Q Search delete prt sc 111 110 19

Identify the starting material in the following reaction. Click the "draw structure" button to launch the drawing utility. draw structure ... [1] 0 3 C10H18 [2] CH3SCH3 H

In an equilibrium mixture of the formation of ammonia from nitrogen and hydrogen, it is found that PNH3 = 0.147 atm, PN2 = 1.41 atm and Pн2 = 6.00 atm. Evaluate Kp and Kc at 500 °C. 2 NH3 (g) N2 (g) + 3 H₂ (g) K₂ = (PN2)(PH2)³ = (1.41) (6.00)³ = 1.41 x 104

Answer 2

Question

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 3

Question

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 4

Question

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 5

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 6

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 7

Chapter 7, Problem 7.11QP

(a)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 8

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 9

(b)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 10

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 11

(c)

Interpretation Introduction

Interpretation: For the given set of molecules the molecular geometry around the central metal should be predicted using VSEPR model.

Concept Introduction:

Molecular geometry: It is defined as unique three dimensional arrangements of atoms around the central metal present in the molecule which is determined by using spectroscopic techniques and also by using Lewis structure or the valence shell electron pair repulsion theory (VSEPR).

VSEPR Theory:

As the name itself indicates that the basis for this theory is the electron pair that is bonded electron present in either single or double bonds or lone pair electrons, present in the valence shell tends to repel each other which then the tends to be in position in order to minimize the repulsions. The steps involved in the theory in describing the geometry is as follows,

The first step is to draw the correct Lewis structure for the molecule.

Then, the electron domain around the central atom should be counted and the geometry that matches with that type of domain in VSEPR should be determined.

Finally, the geometry is predicted by using the orientation of atoms.

The molecules with considering the domains of type AB2 will tend to have shape like linear or bent if the central atom have lone pair of electrons with it, type AB3 will have shape like trigonal planar, type AB4 will have shape like tetrahedral or square planar, type AB5 will have trigonal bipyramidal and AB6 will have shape like octahedral respectively.

Lewis structure for any molecule is drawn by using the following steps,

First the skeletal structure for the given molecule is drawn then the total number of valence electrons for all atoms present in the molecule is determined

The next step is to subtract the electrons present in the total number of bonds present in the skeletal structure of the molecule with the total valence electrons such that considering each bond contains two electrons with it.

Finally, the electrons which got after subtractions has to be equally distributed such that each atom contains eight electrons in its valence shell.

Electron Domain: In VSEPR theory, both the lone pair and the bonded pair are together considered as electron domain regardless of the type of bond in which the bonded pair presents.

To predict: The geometry for the given molecule.

Answer 12

Expert Solution & Answer

Answer 13

Expert Solution & Answer

Answer 14

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 15

Ch. 7.1 - Determine the shapes of (a) SO3 and (b) ICl4.Ch. 7.1 - Determine the shapes of (a) CO2 and (b) SCl2.Ch. 7.1 - (a) From what group must the terminal atoms come...Ch. 7.1 - These four models may represent molecules or...Ch. 7.1 - Acetic acid, the substance that gives vinegar its...Ch. 7.1 - Ethanolamine (HOCH2CH2NH2) has a smell similar to...Ch. 7.1 - The bond angle in NH3 is significantly smaller...Ch. 7.1 - Which of these models represents a species in...Ch. 7.1 - What are the electron-domain geometry and...Ch. 7.1 - What are the electron-domain geometry and...

Solution Summary: The author explains how the molecular geometry around the central metal is predicted using the VSEPR model.

Concept explainers

Videos

Want to see the full answer?

Chapter 7 Solutions