Total utility and marginal utility .

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

MC The diagram shows a pharmaceutical firm's demand curve and marginal cost curve for a new heart medication for which the firm holds a 20-year patent on its production. Assume this pharmaceutical firm charges a single price for its drug. At its profit-maximizing level of output, it will generate a total profit represented by OA. areas J+K. B. areas F+I+H+G+J+K OC. areas E+F+I+H+G. D. - it is not possible to determine with the informatio OE. the sum of areas A through K. (...) Po P1 Price F P2 E H 0 G B Q MR D ō

Price Quantity $26 0 The marketing department of $24 20,000 Johnny Rockabilly's record company $22 40,000 has determined that the demand for his $20 60,000 latest CD is given in the table at right. $18 80,000 $16 100,000 $14 120,000 The record company's costs consist of a $240,000 fixed cost of recording the CD, an $8 per CD variable cost of producing and distributing the CD, plus the cost of paying Johnny for his creative talent. The company is considering two plans for paying Johnny. Plan 1: Johnny receives a zero fixed recording fee and a $4 per CD royalty for each CD that is sold. Plan 2: Johnny receives a $400,000 fixed recording fee and zero royalty per CD sold. Under either plan, the record company will choose the price of Johnny's CD so as to maximize its (the record company's) profit. The record company's profit is the revenues minus costs, where the costs include the costs of production, distribution, and the payment made to Johnny. Johnny's payment will be be under plan 2 as…

Which of the following is the best example of perfect price discrimination? A. Universities give entry scholarships to poorer students. B. Students pay lower prices at the local theatre. ○ C. A hotel charges for its rooms according to the number of days left before the check-in date. ○ D. People who collect the mail coupons get discounts at the local food store. ○ E. An airline offers a discount to students.

Answer 2

Question

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Question

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Question

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 6

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 7

Chapter 7, Problem 1DQ

Subpart (a):

To determine

Total utility and marginal utility.

Answer 8

Subpart (a):

Expert Solution

Explanation of Solution

The total utility can be calculated by adding up the marginal utilities and the marginal utility can be calculated by subtracting the total utility at the previous unit consumed from the total utility at the present consumption.

The total utility and the marginal utility at 1 unit consumption are 10 and the marginal utility from the 2^nd unit is 8. Thus, the total utility at the 2^nd unit can be thus calculated by adding up the marginal utilities as follows:

Total utility at 2nd unit=Marginal Utility at 1st unit+Marginal utility at 2nd unit=10+8=18

Thus, the total utility at the 2^nd unit of consumption is 18 utils.

The total utility at 2^nd unit is calculated as 18. The total utility at the 3^rd unit is given as 25. Thus, the marginal utility of the 3^rd unit can be calculated as follows:

Marginal utility of 3rd unit=Total utility of 3rd unit−Total utility of 2nd unit=25−18=7

Thus, the marginal utility of the 3^rd unit is 7 utils.

Similarly, the total utility at the 4^th unit is 30 and the 3^rd unit is 25. The marginal utility of the 4^th unit can be calculated using the same equation as follows:

Marginal utility of 4th unit=Total utility of 4th unit−Total utility of 3rd unit=30−25=5

Thus, the marginal utility of the 4^th unit is 5 utils.

The total utility at the 4^th unit is given as 30 utils. The marginal utility from the 5^th unit is given as 3. So, the total utility from the 5^th unit can be calculated by adding these two together as follows:

Total utility of 5 units=Total utility of 4 units+Marginal utility of 5th unit=30+3=33

Thus, the total utility of 5 units is 33 utils.

The total utility of 6 units is given as 34. The total utility of 5 units is calculated as 33. Thus, the marginal utility of the 6^th unit can be calculated as follows:

Marginal utility of 6th unit=Total utility of 6th unit−Total utility of 5th unit=34−33=1

Thus, the marginal utility of 6^th unit is 1 util.

Thus, the table can be filled as follows:

Units consumed	Total utility	Marginal utility
0	0	0
1	10	10
2	18	8
3	25	7
4	30	5
5	33	3
6	34	1

The marginal utility starts from 10 and it starts to decline from 10 to 1, at the end. The marginal benefit thus shows a decline. Since the total utility is the addition of marginal utilities, because of the decline in the marginal utility, the total utility increases but at a diminishing rate.

Answer 9

Subpart (a):

Expert Solution

Answer 10

Subpart (a):

Expert Solution

Answer 11

Expert Solution

Answer 12

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 13

Subpart (b):

To determine

Total utility and marginal utility.

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 14

Subpart (b):

To determine

Total utility and marginal utility.

Answer 15

Subpart (b):

Expert Solution

Explanation of Solution

The rational consumers in the economy try to maximize the total utility that they derive from the consumption of the goods and services. Thus, the decline in the marginal utility is not the reason which determines the quantity demanded. Thus, the individuals will try to maximize the total utility and thus, the statement is not agreeable. The marginal utility beyond the 1^st unit may be sufficiently great in terms of price. As a result, people will demand beyond the 1^st unit. Thus, the statement is not agreeable.

Answer 16

Subpart (b):

Expert Solution

Answer 17

Subpart (b):

Expert Solution

Answer 18

Expert Solution

Answer 19

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 20

Subpart (c):

To determine

Total utility and marginal utility.

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.

Answer 21

Subpart (c):

To determine

Total utility and marginal utility.

Answer 22

Subpart (c):

Expert Solution

Explanation of Solution

People compare the level of utility that they receive from the consumption of the goods and services with their respective prices. When the price of the commodity or service is higher than the total utility that the consumer receives from the very first unit of consumption, the rational consumer may decide not to purchase the item. Thus, the statement is agreeable.

Answer 23

Subpart (c):

Expert Solution

Answer 24

Subpart (c):

Expert Solution

Answer 25

Expert Solution

Answer 26

Economics Concept Introduction

Concept introduction:

Utility: It can be described as the benefit or the satisfaction that the consumption of a good or service provides to the consumer.

Total utility: It is the summation of all utilities derived, by the consumer, from the consumption of the individual units of a specific good or service.

Marginal utility: It is the extra satisfaction that a consumer derives from the consumption of an additional unit of the specific good or service.