Explain some of the engineering achievements that one couldn’t do without today.

Explanation of Solution
Followings are the list that include some of the engineering achievements that one couldn’t do without today,
- 1. Electricity.
- 2. Electronics.
- 3. Internet.
- 4. Water supply and Distribution.
- 5. Agricultural Mechanization.
1. Electricity:
Electricity acts as a midst of the transformation process as a technology and innovative disrupt model from generation to beyond the meter. It is a physical phenomenon that is associated with the motion and presence of the matter which has electric charge property.
Electrification is defined as the process of charging the device or material using electricity. Nowadays, electrification has improved and developed the people lives around the world. In ancient days, people used kerosene lamps and candles in order to light their homes. With the advanced and linear development of technology towards electricity, the great changes have taken place. The electricity should be generated initially, and it is transmitted and used by the customers.
Generators are used to produce the electric current. Following are the list of some sources used in the generators:
- Water.
- Wind.
- Nuclear.
- Fossil fuels.
Along with the technology development, the reliability, safety measures, efficiency of machineries in generators are also developed. The electricity is supplied to the followings very easily:
- 1. Home.
- 2. Organizations.
- 3. Industries etc.
2. Electronics:
Electronics mainly deals with the emission and flow of electrons and control of the vacuum, matter and comprises of different applications including physics, engineering and technology etc. The ability which is used to control the flow of electrons can be applied to the device control and information handling methodologies.
The electronic systems uses highly integrated elements which includes the physical and functional characteristics. The best technology achievement held in electronics is mobile phone. Highly modernized handheld cellphone is developed which is evolved as mobile phone from a large box in the car trunk. Current electronic devices provide the following advantages:
- Compactness.
- Reliability.
- Security.
- Innovative techniques.
Development of technology towards the electronics can improve the communication processes. It has a major difference from electrical science and technology. Using the electronic devices peoples can communicate to other people from anywhere.
3. Internet:
Internet includes the following advantages:
- Capability to broadcast the information through world-wide.
- Information dissemination
mechanism. - Collaboration medium.
- Interaction element with the regard of geographic location.
Internet is the best example to showcase the research and development of the information infrastructure. The development of internet includes multiple aspects such as,
- Technological aspect.
- Organizational aspect.
- Community.
The widespread information infrastructure is the trending internet, which is not only influences the technical aspects of computer communications but also gives multiple advantages to the society by serving,
- As a tool to accomplish the electronic commerce.
- Information acquisition.
- Community operations.
In order to link the devices world-wide, internet uses IP suite (i.e.) Internet protocol suite. Internet is a network of networks includes private and public sectors, organizations and the link is provided using wireless, optical networking and electronic technologies.
4. Water supply and Distribution:
Water supply is highly mandatory and it is the provision of water by,
- Public usages.
- Public and Private sectors.
- Commercial organizations.
In ancient days, water is the main thing which has great demand and fear. As the population increases, the water scarcity arises and the cities across the nation were clamoring more for water. Such problems causes more health problems to people and lead to death.
The technology development towards the water supply and distribution solved the problem by supplying water to each and every home using underground water supply system. Such an availability of abundant water and necessary safety measures to prevent living things from the waterborne diseases changes the lives of people linearly.
5. Agricultural Mechanization:
Most of the advancement techniques in agricultural mechanization have been found in 20th century. Agricultural mechanization is the process in which agricultural machineries is used to process the agriculture work, and to increase the productivity for farmers. In upcoming modern techniques have replaced many form jobs as powered machineries. Such machineries can be used to work instead of labors and working animals namely oxen and mules.
The agricultural mechanization process used for the promotion of massive shift from the rural life to urban life in the developed countries with multiple benefits namely,
- Changes in the nature of work.
- Consumer economy.
- Role of women in society.
- Nature and status of an individual families.
The term mechanization is one of the major factors which is highly responsible for urbanization and economy of organizations and industries. Such mechanization process can provide the good quality in farm and encourage the large scale production.
Therefore, some of the engineering achievements that one couldn’t do without today have been explained.
Conclusion:
Thus, some of the engineering achievements that one couldn’t do without today have been explained.
Want to see more full solutions like this?
- You are an engineer designing an aeration tank for a wastewater treatment plant receiving municipal waste. The activated sludge system (aeration tank and secondary clarifier) you design needs to remove 85% of the incoming BODs from the primary effluent, giving a final concentration of 30.0 mg BOD5/L exiting the system. Your design will maintain a concentration of 2500 mg VSS/L and F/M ratio of 0.5 g BOD/g VSS d in the aeration tank. In an effort to keep the waste activated sludge low in water, only about 0.1% of the primary effluent flow (Q) exits the WAS line. The secondary effluent has a flow rate of 9990 m³/d. What volume (in m³) will the aeration tank need to be? Write out all equations and state any assumptions as needed. Primary effluent: Aeration tank V, X, S Secondary clarifier Secondary effluent: Q. Xo. So Qe, Xe, S 0 po RAS line: Q, X., S Activated sludge control volume WAS line: Qw, X, Sarrow_forwardAum A waste incinerator stack emits 27,027 kg/yr of cadmium and has an effective stack might of 100 m. The wind speed is 5 m/s at an anemometer located at 10 m. It is a clear sunny day with the sun nearly overhead (Class B conditions). a. Calculate the ground-level cadmium concentration (in ug/m³) at a distance of 2 km directly downwind? [Refer to tables in the textbook to help with this problem] What is the concentration of cadmium (in µg/m³) inside of a house at the location in part (a) after two hours? Note that the initial concentration of cadmium in the house was zero, there are 0.25 air changes per hour (ach), there is no source of cadmium inside the house, and cadmium is considered a conservative pollutant.arrow_forward6. A simply supported beam is subjected to uniformly distributed loads: a service dead load WD = 5 kips/ft and a service live load w₁ =7 kips/ft. Use the load combination w₁ = 1.2WD + 1.6WL. Note that the shear force is expressed as V₂ = w₁ (-/-- x) where x is the distance from a support. (65pts total) The beam also has the following properties. f = 4ksi, fy = fyt = 60 ksi, b = 18 in, h = 26 in, d = 24.5 in, 20ft No. 4 bars, U-stirrups used, Normalweight concrete (1) Calculate the required spacing of stirrups. (15pts) (2) Calculate the maximum spacing. Also, determine the location along the beam where the maximum spacing can be applied (i.e., the distance from support). (10pts) (3) Show the stirrup designs along with the shear force diagram. Indicate the numbers and spacings of stirrups. A transition between the required spacing and the maximum spacing is unnecessary. (15pts) (4) Assume the live load decreases, and, as a result, the factored shear force is 30 kips. Discuss whether…arrow_forward
- 5. A singly reinforced beam has a width b = 16 in., a height h = 20 in., and an effective depth d = 18.5 in. The beam is reinforced with six No. 8 bars. The beam is subjected to a positive bending moment, causing the bottom of the beam to experience tension. (65pts total) The material properties are as follows: f = 5 ksi, fy = 60 ksi d 888 Six no. 8 bars (1) Find the bending moment [kips-in] that can cause tension cracks. Use the following parameters regarding the equivalent transformed section. Do not consider load and resistance factors. (15pts) - Neutral axis: 10.7 in. from the top face of beam - Moment of inertia: 12,550 in² around the neutral axis - Modulus of rupture: fƒ„ = 7.5√ƒ! [psi] (i.e., the concrete tensile stress for crack initiation) (2) Find the service moment strength [kips-in]. The allowable stress of concrete and steel is 0.45f, and 0.5fy, respectively. Do not consider load and resistance factors. (15pts) (3) Calculate the nominal moment strength M, and the design…arrow_forwardQ2) Determine the bar forces and reactions of the truss. ABD= 4 in², A= 2 in² and E=30000 kips/in². A D 20 ft 60 kips 15 ft Barrow_forwardL h Water Fig. P4 Hinge Farrow_forward
- Someone wants to study environmental engineering in a European country for 8 years and wants to deposit an amount of money in one of the approved banks for the purpose of paying his annual study expenses, where it is planned that he will withdraw $2000 annually after one year from the date of deposit for a period of five consecutive years, and then withdraw $3000 annually for the remaining period of his studies. Calculate the amount required to be deposited for the purpose of covering the study expenses if you know that the interest rate is 8.5%arrow_forwardDesign a typical girder for the floor system shown in the figure below. In addition to the weight of the beam, the dead load consists of a 5-inch-thick reinforced concrete slab (normal-weight concrete). The live load is 85 psf, and there is a 20-psf partition load. Do not check deflections. Assume that the girder is supporting beams on each side, and assume that the beams weigh 35 lb / ft. Let all the loads on the girder act as a uniform load (be sure to include the weight of the beams). 30' A -4 @ 5' = 20' Use the table below. - Mn (ft-kips) Mn/ (ft-kips) | Vn (kips) Vn/v (kips) Shape W21 × 48 398 265 216 144 W12 × 58 324 216 132 87.8 W16 × 45 309 205 167 111 W18 × 40 294 196 169 113 a. Use LRFD. Calculate the required moment strength and the maximum shear. (Express your answers to three significant figures.) Mu - Vu Select a shape: -Select- b. Use ASD. ft-kips kips Calculate the required moment strength and the maximum shear. (Express your answers to three significant figures.) Ma =…arrow_forwardWater in a tank is used to control the water pressure in a pipe as shown in Figure P5 below. Find the pressure in the pipe at A if h = 200 mm and the mercury is at the elevation shown (between points B and C). Assume standard atmospheric pressure and neglect the diameter of the pipe. Express your answer in kPa.arrow_forward
- Select a W-shape for the following conditions: Beam spacing = 12 ft Span length = 25 ft Slab and deck combination weight = 43 psf Partition load = 20 psf Ceiling weight = 5 psf Flooring weight = 2 psf Live load 160 psf Fy = 50 ksi The maximum live load deflection cannot exceed L/340. Shape Mp (ft-kips) M₁/ (ft-kips) Vn (kips) Vn/v (kips) Ix (in. Vn/n, (kips) I. (in.) W14 × 61 383 254 156 104 640 W21 × 44 358 238 217 145 843 W16 × 50 345 230 186 124 659 W18 × 46 340 226 195 130 712 a. Use LRFD. Calculate the required moment of inertia, the required moment strength, and the maximum shear. (Express your answers to three significant figures.) Ix = in. 4 Μι = Vu Select a shape: -Select- b. Use ASD. ft-kips kips Calculate the required moment of inertia, the required moment strength, and the maximum shear. (Express your answers to three significant figures.) Ix Ma = Va = Select a shape: -Select- 4 in. ft-kips kipsarrow_forwardThe beam shown in the figure below has continuous lateral support of both flanges. The uniform load is a service load consisting of 70% dead load and 30% live load. The dead load includes the weight of the beam. 6 k/ft +9 18' If A992 steel is used, is a W12 × 35 adequate? For A992 steel: Fy = 50 ksi. bf h For W12 x 35: = 6.31, = 36.2 in., Zx 2tf tw (Express your answers to three significant figures.) a. Use LRFD. Mu Фомп = ft-kips ft-kips A W12 × 35 is -Select- b. Use ASD. Ma = ft-kips Mn ft-kips 26 A W12 × 35 is -Select- = +6→ 51.2 in. 3arrow_forwardVerify the value of Zx for a W10 × 30 that is tabulated in the dimensions and properties tables in Part 1 of the Manual. For W10 × 30: Ag Use the table below. - 8.84 in.2, d 10.5 in. AISC Manual Label y (in.) WT 9 × 25 2.12 WT 8 × 25 1.89 WT 7 × 24 1.35 WT 6 × 25 1.17 WT 5 × 15 1.10 (Express your answer to three significant figures.) Zx = 3 in.arrow_forward
- Engineering Fundamentals: An Introduction to Engi...Civil EngineeringISBN:9781305084766Author:Saeed MoaveniPublisher:Cengage LearningFundamentals Of Construction EstimatingCivil EngineeringISBN:9781337399395Author:Pratt, David J.Publisher:Cengage,Construction Materials, Methods and Techniques (M...Civil EngineeringISBN:9781305086272Author:William P. Spence, Eva KultermannPublisher:Cengage Learning


