You have configured a new web server in your network, which will be used only from the local network. You published the website on TCP port 8443 but are unable to access the website on that port from a client device. You are able to ping the server IP address and also have access to the server using a Remote Desktop Connection. What could be the cause of this issue? O NAT is not configured correctly Windows firewall is enabled, and port 8443 is not allowing traffic Microsoft Edge browser is configured incorrectly on the client device There is no static route pointing to the server on the router Server is placed in the wrong VLAN Submit

You have configured a new web server in your network, which will be used only from the local network. You published the website on TCP port 8443 but are unable to access the website on that port from a client device. You are able to ping the server IP address and also have access to the server using a Remote Desktop Connection. What could be the cause of this issue? O NAT is not configured correctly Windows firewall is enabled, and port 8443 is not allowing traffic Microsoft Edge browser is configured incorrectly on the client device There is no static route pointing to the server on the router Server is placed in the wrong VLAN Submit

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

You are creating a VPN infrastructure in a test lab to use only L2TP for VPN server running on Windows Server 2019. Which of the following ports will you open on firewall on VPN server? Inbound Rule for Remote Shutdown (RPC) Remote Service Management (RPC-EPMAP) Remote Service Management (RPC) Routing and Remote Access (L2TP-In)
You are a system administrator and all the computers on your organization’s network are unable to lease addresses from the DHCP servers. How will you fix this issue?
Computer Science You work as the IT security administrator for a small corporate network. You need to configure the network security appliance. In this lab, your task is to perform the following: Rename the default user account (cisco) with the following parameters: Use the user name NSAAdmin. Use the password KeepOut!@. Set the idle timeout to 15 minutes. Configure this user for LAN access only (no WAN access). Configure the Optional port on the NSA for LAN and configure the LAN ports to act as a DHCP server with the following parameters: Starting IP Address: 198.28.1.100 Ending IP Address: 198.28.1.250 Primary DNS server address: 163.128.78.93 Secondary DNS server address:163.128.80.93 Set the Default Outbound Policy for IPv4 on the firewall to Allow Always and enable all of the available firewall attack checks. Enable the IPS on the LAN interface and set the policy to Detect and Prevent for all categories.
Assume that you are currently logged into S1. Configure the port security on the LAN interface FastEthernet 0/19 on switch S1 by using the following requirements. Enable the LAN interface FastEthernet 0/19 for access mode. Enable port security on the interface FastEthernet 0/19. Set the maximum number of MAC address allowed on the interface FastEthernet 0/19 to 5. Configure the MAC address 00E0.8F82.DD0C to the interface FastEthernet 0/19. Configure the interface FastEthernet 0/19 to dynamically learn additional MAC addresses and dynamically add them to the running configuration.
You are the Network Engineer for your company. You have installed a new router in your network. You are concerned about security on the device. Which commands should you use to accomplish the following tasks: 1. protect access to the line console configuration mode using the SecureCon password. 2. protect access to VTY lines numbered 0 to 15 configuration mode using the SecureVTY password. 3. enable a secret password of SecurePri for the Privileged EXEC mode? 4. Display warning message to those logging into the device with the message: “Warning: Authorized access only.” 5. Encrypt all plain text passwords. 6. configure interface vlan 1 with IP address 199.2.2.2 and default subnet mask. 7. save the running configuration file to NVRAM to avoid loss if the device is powered down. 8. Rename the device to be SecureDev. Please write commands for all parts
Your company's network administrator must design and install a new file and print server for Windows, Linux, and Mac OS X clients. The server will also host DHCP services and a small company website. Write down the server services and security methods you wish to utilise.
While investigating, you have decided that the problem may lie in the DHCP server's settings. Clients are able to ping IP addresses on the local network and the internet, but they are unable to load other websites. What may lead to a misconfigured DHCP server? incorrect NTP server erroneous Domain Name System server incorrect entryway Incorrect subnet mask
L
Which file stores the TCP/IP addresses of the DNS servers used to resolve host names ifno DNS servers are specified within the network configuration file for the NIC?a. /etc/hostsb. /etc/host.confc. /etc/resolved. /etc/resolv.conf
As you assist a colleague who is having network connection issues, you discover the machine is looking for a DNS server that does not exist. What command-line tool may be used to guarantee that the DNS server is given the correct IP address?
When we configure the IP address of our laptop in a campus network, we must assign the subnet mask. Who does assign/specify the subnet mask value in a campus network? That is the user of the laptop or the network administrator of the campus network.