You are a journeyman electrician working in an industrial plant. Your task is to connect an inductor to a 480-V, 60-Hz line. To determine the proper conductor and fuse size for this installation, you need to know the amount of current the inductor will draw from the line. The nameplate on the inductor indicates that it has an inductance of 0.1 H. An ohmmeter reveals that it has a wire resistance of 10 Ω. How much current should this inductor draw when connected to the line?

You are a journeyman electrician working in an industrial plant. Your task is to connect an inductor to a 480-V, 60-Hz line. To determine the proper conductor and fuse size for this installation, you need to know the amount of current the inductor will draw from the line. The nameplate on the inductor indicates that it has an inductance of 0.1 H. An ohmmeter reveals that it has a wire resistance of 10 Ω. How much current should this inductor draw when connected to the line?

Similar questions

A simple series circuit consists of just a 38.1 µF capacitor and an 194 mH inductor, with no appreciable resistance. At t = 0 the capacitor has a charge of 5.4 µC and the current in the inductor is zero. How long after t = 0 will the current in the circuit first reach its maximum value? Hint: Draw a graph of current vs. time. Provide the solution: ______ms
In the circuit of the figure below, the battery emf & is 55 V, the resistance R is 210 0, and the capacitance C is 0.500 µF. The switch S is closed for a long time interval, and zero potential difference is measured across the capacitor. After the switch is dpened, the potential difference across the capacitor reaches a maximum value of 150 V. What is the value of the inductance? R 3. S ll
8 and 9
A loop of wire has a self-inductance of 5.5 mH. You pass a current of 9.0 Amps though the loop, and then drop the current to 0 at a contastant rate over 3.5 seconds. What is the EMF generated?
A 14.0 mH inductor makes the current drop from 178 mA to 66.0 mA in only 10.0 μs. What is the potential difference across the inductor? 0.00157 V -92.4 V -249 V 157 V