You are a civil engineer who has been given the assignment to redesign the curved roadway in such a way that a car will not have to rely on friction to round the curve without skidding. In other words, a car moving at the designated speed can negotiate the curve even when the road is covered with ice. Such a road is usually banked, which means that the roadway is tilted toward the inside of the curve. Suppose the designated speed for the road is to be 11.2 m/s (25.0 mi/h) and the radius of the curve is 30.0 m. You need to determine the angle at which the roadway on the curve should be banker

You are a civil engineer who has been given the assignment to redesign the curved roadway in such a way that a car will not have to rely on friction to round the curve without skidding. In other words, a car moving at the designated speed can negotiate the curve even when the road is covered with ice. Such a road is usually banked, which means that the roadway is tilted toward the inside of the curve. Suppose the designated speed for the road is to be 11.2 m/s (25.0 mi/h) and the radius of the curve is 30.0 m. You need to determine the angle at which the roadway on the curve should be banker

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Two banked curves have the same radius. Curve A is banked at 13.9 °, and curve B is banked at an angle of 18.1 °. A car can travel around curve A without relying on friction at a speed of 13.7 m/s. At what speed can this car travel around curve B without relying on friction?
A block is placed on a turntable 43 cm from the axis of rotation. The turntable very slowly speeds up to 35.5 RPM. What is the minimum coefficient of static friction between the block and the turntable surface that would prevent the block from sliding away under these conditions?
A highway curve of a radius of 400 m is designed for traffic moving at a speed of 91.0 km/hr. What is the correct banking angle of the road?
A car drives around two circular curves on two different roads. The two curves have the same radius of curvature. And coincidentally, the maximum speed that the car can drive through either of the turns is the same for both roads. The first road is frictionless, but it is banked at 14.5 degrees from the horizontal. The other turn is flat. What is the coefficient of friction between the car tires and the road on the unbanked turn?
Civil and traffic engineers want to design a banked curve on a highway. The curve will have a 1.80 km radius and the highway's speed limit will be 70.0 mph. If every car will travel at the speed limit, what is this curve's ideal banking angle to three significant figures? NB: 1609 m = 1 mile. Hint: be careful with your units. 1.94° 2.62° 4.02° 3.18° 2.95° 15.5°
A curve in a stretch of highway has radius 512 m. The road is unbanked. The coefficient of static friction between the tires and road is 0.700. What is the maximum safe speed that a car can travel around the curve without skidding?
A Dangerous Ride. You and your exploration team are stuck on a steep slope in the Andes Mountains in Argentina. A deadly winter storm is approaching and you must get down the mountain before the storm hits. Your path leads you around an extremely slippery, horizontal curve with a diameter of 96.0 m and banked at an angle of 40.0° relative to the horizontal. You get the idea to unpack the toboggan that you have been using to haul supplies, load your team upon it, and ride it down the mountain to get enough speed to get around the banked curve. You must be extremely careful, however, not to slide down the bank: at the bottom of the curve is a steep cliff. (a) Neglecting friction and air resistance, what must be the speed of your toboggan in order to get around the curve without sliding up or down its bank? Express your answer in m/s and m.p.h. (b) You will need to climb up the mountain and ride the toboggan down in order to attain the speed you need to safely navigate the curve (from…
A car is trying to make a turn on a banked curve on a very icy day and the frictional force between the tires and road is zero. The curve has a radius of 50 m and the car is moving at 12 m/s. What angle should the curve be banked at for this to happen safely?
A car of mass 622 kg is driving around a curve with a circular arc of radius 20 m. If the car drives at a speed of 12 m/s, what is the minimum value of the coefficient of friction between the car's tires and the road that will keep the car on the road?