Windmills slow the air and cause it to fill a larger channel as it passes through the blades. Consider a circular windmill with a 7-m-diameter rotor in a 10 m/s wind on a day when the atmospheric pressure is 100 kPa and the temperature is 20°C. The wind speed behind the windmill is measured at 7.5 m/s. a) Determine the diameter of the wind channel downstream from the rotor.T b) Determine the mass flow rate through the wind mill. c) Determine the power produced by this windmill, presuming that the air is incompressible. Flow channel 111111

Windmills slow the air and cause it to fill a larger channel as it passes through the blades. Consider a circular windmill with a 7-m-diameter rotor in a 10 m/s wind on a day when the atmospheric pressure is 100 kPa and the temperature is 20°C. The wind speed behind the windmill is measured at 7.5 m/s. a) Determine the diameter of the wind channel downstream from the rotor.T b) Determine the mass flow rate through the wind mill. c) Determine the power produced by this windmill, presuming that the air is incompressible. Flow channel 111111

Name: Windmills slow the air and cause it to fill a larger channel as it pa
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: Windmills slow the air and cause it to fill a larger channel as it passes through the blades. Consider a circular windmill with a 7-m-diameter rotor in a 10 m/s wind on a day when the atmospheric pressure is 100kPa and the temperature is 20°C. The w

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

r A hose has a radius r=4 cm is filling a storage dam that can accommodate a volume V=771 liters. The time required to completely pour full capacity in the storage dam is t=2 minutes. Find the velocity of flow (m/s) of the fluid in the hose.
A drinking fountain projects water at an initial angle of 50° above the horizontal, and the water reaches a maximum height of 0.150 m above the point of exit. Assume air resistance is negligible. 1. Calculate the speed at which the water leaves the fountain 2. The radius of the fountain’s exit hole is 4 x 10-3 m. Calculate the volume rate of flow of the water 3. The fountain is fed by a pipe that at one point has a radius of 7 x 10-3 m and is 3 m below the fountain’s opening. Calculate the gauge pressure in the feeder pipe at this point.
2. Water flows through a fire hose of diameter 6.35 cm at a rate of 0.012 m³/s. The fire hose ends in a nozzle of inner diameter 2.20 cm. What is the speed with which the water exits the nozzle?
An airplane is pressurized with air to 650 mmHg. a. If air is 21% oxygen, what is the partial pressure of oxygen on the plane? b. If the partial pressure of oxygen drops below 100 mmHg, passengers become drowsy. If this happens, oxygen masks are released. What is the total cabin pressure at which oxygen masks are dropped?
Lossless Bernoulli's equation can be used, when Select one or more: a. no heat is brought into the fluid and no work is done on the fluid. b. the flow is steady. heat is brought into the fluid or work is done on the fluid C. Od. the flow is compressible. Oe. the flow is incompressible f. the flow can be assumed frictionless. g. continuity equation is not valid.
2. Air enters a converging nozzle at 3.5 m/s. at 1.2 kg/m³. The inlet area is 5 cm². If the outlet area is 1.7 cm² and velocity of 7.5 m/s, determine the volume flowrate and air density at the nozzle outlet.
5.
What is the cause of air pressure? Why does the pressure a fluid exerts on the walls of its container decrease when the fluid starts to flow through the container (e.g. a piece of tubing)? Why is it impossible to pull a fluid? What does it mean to "entrain a fluid" into a flow? When the gauge on a cylinder of gas reads zero, is the cylinder actually empty? Explain.
B8
B
A child is playing with a 0.5 kg ball in the swimming pool. The ball is made of a stiff rubber and has a radius of .25 m. Assume the volume of the ball does not change when held under water. What downward force must the child exert on the ball to hold it in equilibrium just below the surface of the water? a. b. How does this answer change if the child was holding the ball near the bottom of the pool (1.5 m down)?
44