1. Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pumpwith a specific volume of 1.2720 X 10°m/Kg and exits (the pump) at 1.7530 X 10° m²/Kg and atemperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine:a. The network produced in KJ/Kgb. The heat transfer to the steam in the steam generator in KJ/Kgc. The thermal efficiencyd. The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.TWturb,outGin14JoutW.pump,in2.

Answered: Image /qna-images/answer/0066a301-22fb-4717-8525-ba3bceb9ada3.jpg

Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10°m²/Kg and exits (the pump) at 1.7530 X 103m²/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine: The network produced in KJ/Kg The heat transfer to the steam in the steam generator in KJ/Kg The thermal efficiency The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.

Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10°m²/Kg and exits (the pump) at 1.7530 X 103m²/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine: The network produced in KJ/Kg The heat transfer to the steam in the steam generator in KJ/Kg The thermal efficiency The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

PROBLEM: Steam power plant with ideal Rankine cycle. Steam enters the turbine at 4MPA and 700°C. The steam is cooled in the condenser at 20 kPa using cooling water. The net power output of the cycle is 100MW. Determine: a) The power produced by the turbine and consumed by the pump, b) thermal efficiency of the cycle, c) mass flow rate of the steam, and d) the mass flow rate of the condenser cooling water, if the cooling water enters the condenser at 15 °C and exits at 35°C. Draw the T-s diagram.
Consider a steam power plant operating on the ideal Rankine cycle. Steam enters the turbine at 3 MPa and 350°C and is condensed in the condenser at a pressure of 10 kPa. Determine
In a steam plant operating according to an ideal Rankine cycle, water vapor enters the turbine at a pressure of 3.0 MPa and a temperature of 600 oC and exits the turbine with a dryness of 100 kPa and 0.8. By removing heat from the condenser to the surrounding environment, the water is provided to be saturated liquid at 100 kPa. In this case, what would be the amount of heat released from the Condenser to the surrounding environment per unit mass?
Consider a steam power plant that operates on a simple ideal Rankine cycle and has a net power output of 120 MW. Steam enters the turbine at 10 MPa and 550° c and is cooled in the condenser at a pressure of 15 kPa by running cooling water from a nearby source the condenser at a rate of 3000 kg/s. Determine the enthalpy h4 at the outlet of the Turbine
A power plant uses a gas turbine to produce electricity. Assume that the gas-turbine operates on the ideal Brayton cycle has a pressure ratio of 8. The outside air temperature is 27 C and without preheating, the air is drawn into the compressor. The air compressed in the compressor and its pressure and temperature increase. Thereafter it is supplied into the combustion chamber where its temperature increases to 1023 C at constant pressure. Thereafter, hot air is drawn into the turbine. By considering the air-standard assumptions, determine (a) the gas temperature at the exits of the compressor and the turbine (b) the back work ratio (c) the thermal efficiency
In the ideal Rankine cycle shown, the boiler pressure is 6 MPa and the condenser pressure is 8 kPa. The steam enters the turbine at 440°C at a mass flow rate of 7.0 kg/s. In your written solution, (a) determine the enthalpies at states 1, 2, 3, and 4; (b) draw the T-s diagram with the states in the correct region; (c) determine the cycle power output; and (d) the cycle thermal efficiency.
Problem: Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10-3m3/Kg and exits (the pump) at 1.7530 X 10-3 m3/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine:1. The network produced in KJ/Kg2. The heat transfer to the steam in the steam generator in KJ/Kg3. The thermal efficiency4. The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.
Determine the thermal efficiency
An ideal gas turbine cycle consisting of 2 stages of compression and 2 stages of expansion has an overall pressure ratio of 9. Air enters the compressors at the temperature of 320 K while, being intercooled between the stages. Air enters the first compressor at 100 kPa and the pressure ratio of cach of the compressors are selected in a way that minimizes the total power input for the compressors. The high-pressure turbine (First one) drives the compressors and the low-pressure one produces power output. The compressors and both the high-pressure and low-pressure turbines can be assumed ideal. To increase the efficiency of the cycle a regenerator with effectiveness of 85% is used to recover some heat from the exhaust of the second turbine. In this cycle, air with the temperature of 1400 K enters the first turbine. After expansion in the first turbine, air is reheated to the same temperature at the inlet of the first turbine (1400 K). You can consider constant specific heats of c,=1.005…
A Rankine Cycle operates at a throttle pressure and temperature of 5 MPa and 450°C, respectively. The generator produces 20 MW at an efficiency of 95% while the mechanical efficiency is 97%. The actual expansion efficiency of the turbine is 85% and the pressure of the condenser is 10 kPa. Determine the mass flow rate of steam in kg/s
A steam power plant operating in a Rankine cycle has saturated yapor at 4.0 MPa leaving the boiler. The turbine exhausts to the condenser, operating at 75 kPa, and the mass flow rate of the working fluid is 5.0 kg/hr. The turbine efficiency is 0.85. Solve for the work produced by the turbine and the pump (in Watts), the heat transfer in the boiler (in Watts), and the Rankine cycle efficiency.