Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.? and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 Ibf/in.? and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 Ibf/ in.?, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.? and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.? before entering the steam generator. The net power output of the cycle is 5.5 x 10³ Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in Ib/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency.

Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.? and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 Ibf/in.? and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 85%. Pressure at the condenser inlet is 2 Ibf/ in.?, but due to frictional effects the condensate exits the condenser at a pressure of 1.5 lbf/in.? and a temperature of 110°F. The condensate is pumped to 1600 lbf/in.? before entering the steam generator. The net power output of the cycle is 5.5 x 10³ Btu/h. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Determine for the cycle: (a) the mass flow rate of steam, in Ib/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

· Ex Determine the efficiency of a Rankine cycle using steam as the working flaid in which the condenser pressure is 10 kPa. The boiler pressure is 2 MPa. The steam leaves the boiler as saturated vapor. In solving Rankine-cycle problems, we let w, dencte the work into the pump per kilogram of fluid flowing and q, denote the heat rejected from the working fluid per kilogram of fluid flowing. To solve this problem we consider, in succession; a control surface around the punmp, the boiler, the turbine, and the condenser. For each the thermodynamic model is the steam tables, and the process is steady state with negligible changes in kinetic and połential energies. First consider the pump: 20 kea
A power plant operates with water undergoing a simple rankine cycle. The plant steamgenerator operates at 3 MPa, while the condenser operates at 5 kPa. The turbine receives steam at 3MPa, 250 °C.The isentropic efficiencies of the turbine and the feedwater pump are 90%, and 80%, respectively.a. Graph the cycle on a T-s diagram and calculate the heat added to the cycle (kJ/kg) b. If the plant produces 30 MW of net power, calculate the mass flow of steam (kg/s) and calculate the thermal efficiency (%) c. The condenser rejects heat in a heat exchange process. On the other line, river water, initially at20 °C, flows in from the outside. If the water exits the process at a temperature of 30 °C, calculatethe mass flow of the river water.
Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in² and 1000°F. The condenser pressure is 2 lb/in.² The net power output of the cycle is 250 MW. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Step 1 * Your answer is incorrect. Determine the mass flow rate of steam, in lb/h. m = i 1207000 lb/h
Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 Ibę/in? and 1000°F. The condenser pressure is 2 Ib/in.? The net power output of the cycle is 250 MW. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Step 1 Your answer is correct. Determine the mass flow rate of steam, in Ib/h. 1536000 Ib/h
A 60 MW power plant operates with a reheat cycle. The steam enters the turbine at 15 MPa, 590°C. The steam enters the reheater at 1.95 MPa and 280°C and exits at 1.8 MPa, 590°C. Conden pressure is. 0.0035 MPa. The steam rate is 150.000 kg/hr, and the generator efficiency is 90%. Determine the following: 1. Ideal cycle thermal efficiency without pressure drop 2. Actual cycle thermal efficiency 3. Actual combined engine efficiency 4. Enthalpy of exhaust steam (at point 4) if the heat lost through the turbine casing is 2% of the combined work.
Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lb/in² and 1000°F. The condenser pressure is 2 lb-/in.² The net power output of the cycle is 250 MW. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Step 1 Determine the mass flow rate of steam, in lb/h. m = Hint Step 2 Your answer is correct. Oin 1513083.513 Determine the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. = i lb/h Save for Later Btu/h Attempts: 3 of 4 used Attempts: 0 of 4 used Submit Answer
STEP 4 PLS
Which one of the following modifications of the simple ideal Rankine cycle increases the thermal efficiency and reduces the moisture content of the steam at the turbine outlet? A. Decreasing the condenser pressure. B. Increasing the boiler pressure. C. Decreasing the boiler pressure. D. Increasing the turbine inlet temperature.
Please solve the following
Water is the working fluid in an Ideal Rankine cycle. Steam enters the turbine at 1400 lbpin² and 1000°F. The condenser pressure is 2 Iben. The net power output of the cycle is 250 MW. Cooling water experiences a temperature Increase from 60°F to 765, with negligible pressure drop, as it passes through the condenser. Step 1 Determine the mass flow rate of steam, In lb/h, Step 2 Hint Your answer is correct On Determine the rate of heat transfer, in Stuh, to the working fuld passing through the steam generator. 2144195010 Btu/h Step 3 Hint 1536198.045 Your answer is correct. Step 4 Your answer is correct. Determine the thermal efficiency of the cycle. Hint 39.78 % Determine the mass flow rate of cooling water, in lb/h 1b/h Attempts: 3 of 4 used Attempts: 1 of 4 used Attempts: 1 of 4 used
Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 8 MPa, 5608C with a mass flow rate of 7.8 kg/s and exits at 8 kPa. Saturated liquid enters the pump at 8 kPa. The isentropic turbine efficiency is 88%, and the isentropic pump efficiency is 82%. Cooling water enters the condenser at 188C and exits at 368C with no significant change in pressure. Determine: (a) the net power developed, in kW. (b) the thermal efficiency. (c) the mass flow rate of cooling water, in kg/s
Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lb/in² and 1400°F. The condenser pressure is 2 lb-/in.² The net power output of the cycle is 250 MW. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. Step 1 * Your answer is incorrect. Determine the mass flow rate of steam, in lb/h. m = I lint i 1347451.2 lb/h