5. Water is siphoned from a large tank and dischargesinto the atmosphere through a 0.05 m diameter tube.The end of the tube is 0.9 m below the tank bottom,and the height of the tube is H = 2.0 m.2.75 m%3D(a) Determine the volume flowrate from the tank.(b) Determine the water pressure at the top of the tube.(Assume viscous effects are negligible) I0.9

Given: The diameter of the tube is 0.05 m. The depth of the tube in the tank is 0.9 m. The height of…

Water is siphoned from a large tank and discharges into the atmosphere through a 0.05 m diameter tube. The end of the tube is 0.9 m below the tank bottom, and the height of the tube is H= 2.0 m. (a) Determine the volume flowrate from the tank. (b) Determine the water pressure at the top of the tube. (Assume viscous effects are negligible)

Water is siphoned from a large tank and discharges into the atmosphere through a 0.05 m diameter tube. The end of the tube is 0.9 m below the tank bottom, and the height of the tube is H= 2.0 m. (a) Determine the volume flowrate from the tank. (b) Determine the water pressure at the top of the tube. (Assume viscous effects are negligible)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Both 150 mm square outside 300 mm 450 mm

Q: Aliquid of density 900 kg/m³ rises to a height of 7 mm in a capillary tube of 2 mm Internal…

A: Density of the liquid, The angle of contact of the liquid in the glass, The diameter of the…

Q: If the capillary rise of water in a 1 mm diameter tube is 3 cm, the height of capillary rise of…

A: Height of capillary rise h=2σ cosθρgr h1r1=2σcosθρg=30*0.5= 15 mm2= h2r2 (As all the other…

Q: This is an open-top cylindrical tank* height of tank = 4 meters diameter of tank = 2 meters The…

Q: QSDistillation columns are used to separate chemical substances based on the differences in their…

A: To find the equation of plate and surface area not covered by the bubble caps

Q: Darcy Experiment A set-up of Darcy Experiment involves measuring the pressure head at two…

A: Given data Hydraulic head at 1 (h1) = 66cm Hydraulic head at 2 (h2) = 54cm Travel distance (L) =…

Q: The discharge flowing down the pipe is 0.03 m3/s and the pressure at 2 is 20kPa. Assuming the losses…

Q: A 10m diameter cyclindrical storage contains 800m³ of oil (SG=0.85, v=2x10-³ m²/s). A 40cm diameter…

A: Head loss in Pipe- Head loss in pipe are of two types 1) Major Head Loss- It is the loss which occur…

Q: A huge tank initially holds 1000 liters of brine containing 25 kg of salt. Another brine solution is…

Q: What is the pressure 1.5 m below the liquid surface?

Q: Determine the height of the water from the right leg if the liquid added in the left leg has a…

A: Using pressure equation:P+ρlghliq=ρwghw

Q: - In a mano meter shown, the fluid from A to B is mercury (s-g. 13.0) and from e to C, the flud is…

A: Given data in question Specific gravity of mercury Spacific gravity of oil Pressure at point C…

Q: A water supply tank is capable of providing 0.3 m³/s of water for fire fighting in a chemical plant.…

Q: (4) Consider that we have a horizentral pipe, like shown in the sketh, which is carrying in this…

A: Elevation of tank (z1) = 100 mElevation of pipe (z2) = 20 mDiameter of pipe (D) = 20 cm = 0.20…

Q: A pipe carrying oil of specific gravity 0.88 changes in size from 150 mm in diameter at section 1 to…

Q: For constant density flow through this round nozzle, V₁ = 1.7 m/s and V₂ = 20 m/s. The ratio of…

Q: 2. Determine the height of the water from the right leg if the liquid added in the left leg has a…

Q: Water is pumped from an elevated pool to a tank that is initially empty. The height from the water…

A: Given: Water is pumped from an elevated pool to a tank that is empty. The height from the water…

Q: Oil (SG oil = 0.95) flows at 200 L/s through a 200mm diameter pipe, 500m long. Friction factor is…

A: Given data SG of oil = (Go) = 0.95 Friction factor (f) = 0.0225 Length of pipe (L) = 500 m…

Q: Determine the elevation at point A (ha) if the air pressure in the sealed left tank is -32 kPa. All…

Q: Flow rate of a fluid (density = 1000kg/ m³) in a small diameter tube is 800 m³/ s. The length and…

A: Given- discharge Q=800 m3/s density ρ=1000 kg/m3 Length L= 2 m Diameter D=0.5 mm pressure drop = 2…

Q: An open tank contains 5.70 m of water covered with 2.80 m of kerosene (y = 8.0 kN/m³). Find the…

A: Height of water in tank (h1) = 5.70 m Height of Kerosene in tank (h2) = 2.80 m Specific weight of…

Q: a.) Determine the pressure difference between the two vessels when the difference in the levels of…

Q: Water flows from the ground floor to the third floor in a 4-storey building through a pipe 50 mm in…

A: Discharge, Q=2 L/s Diameter of the pipe, D=50 mm Roughness coefficient, k=0.03 mm Opening diameter…

Q: (3) Water jet 0.05 m- (2) 0.8 m •(1) 8X.X kPa 0.1 m Figure Q2 (b) (i) Determine the flow rate at the…

Q: A viscous liquid (p = 1.2x10³kg/m³, u = 10m//s through a horizontal, 4 mm diamete a 1 m length of…

Q: O-0.13 Darcy Experiment A set-up of Darcy Experiment involves measuring the pressure head at two…

A: given- Hydraulic head at 1, h1=24 inchesHydraulic head at 2, h2=11 inchesdistance travelled, L=100…

Q: The open tank with piezometers attached on the side, contains two different liquids. Find the…

A: As the liquid in piezometer A and liquid in tank above the installation point of piezometer A is…

Q: open tank contains 5.7 m of water covered with 2.8 m of kerosene with unit weight of 8.0 kN/m³. Find…

Q: Compute the capillary rise in mm of pure water at 10 Celsius expected in an 0.8 mm diameter tube.

Q: A 3m Oil: 2m S.g. = 0.9 %3D (F), B 2m Water (F,

Q: Glycerin at 20 °C flows upward in a vertical 75- mm-diameter pipe with a centerline velocity of 3.3…

A: Given: Diameter of pipe, D = 75 mm = 0.075 m Centerline velocity, Vc = 3.3 m/s Length of pipe, L =…

Q: 2. A nozzle 3 m long has a diameter of 1.3 m at the upstream end and reduces linearly to 0.45 m…

A: As per Bartleby policy i can answer only one question at a time. Please upload other questions…

Q: -8.33 -0.12 8.33 (1) 0.12 -L Darcy Experiment A set-up of Darcy Experiment involves measuring the…

A: Given data Hydraulic head at section-1 (h1) = 66cm Hydraulic head at section-2 (h2) = 54cm Length…

Q: A vertical U-tube, with both ends open, contains mercury to & depth of 10 in. in each tube above the…

Q: 1.5 т 0.2 m Bottom surface of the 2.XX т cylindrical tank FR 6 т Figure Q2 (a) Determine the…

A: Unit weight of ethyl alcohol=7.74 kN/m3 h=1.5m D=2.07m

Concept explainers

Storm Sewers and Detention

The storm drains system transports rainwater or stormwater and other runoff from roads, parking lots, and roof downpipes directly to nearby creeks, rivers, or the sea without any treatment.

Question

5. Water is siphoned from a large tank and discharges
into the atmosphere through a 0.05 m diameter tube.
The end of the tube is 0.9 m below the tank bottom,
and the height of the tube is H = 2.0 m.
2.75 m
%3D
(a) Determine the volume flowrate from the tank.
(b) Determine the water pressure at the top of the tube.
(Assume viscous effects are negligible) I
0.9

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Trending now

This is a popular solution!

Step by step

Solved in 5 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

2. Oil of specific gravity of 0.90 is discharging through a 100 mm circular sharp edge orifice in the end of a 120mm pipe. The pressure head on the center line of the pipe just upstream from the orifice is 9m of oil, and discharges takes place into a closed tank in which the vapor pressure is - 20 kPa. Use C = 0.68 and Cv = 0.97. Compute the discharge. 120 mm pipe P = - 20 kPa 100 mm orifice
Two pipes A and B are connected in parallel between two points. Pipe A is 200 m long and has a diameter of 16 cm, pipe B is 150 m long and has a diameter of 12 cm. Both the pipes have the same friction factor of 0.018. A partially closed valve in pipe 'A' causes the discharge in the two pipes to be the same. All other minor losses can be neglected. The value of the valve coefficient is - Valve F = 0.018 L=200m, d-16cm L,=150m, d=12cm B F = 0.018
An oil of viscosity 8 poise flows between two parallel fixed plates which are kept at 60 mm distance. The pressure drop over the length of 150 cm is observed to be 4.5 kPa. The width of the plates is 0.2 m. The discharge of flow (in Ips) is [Assume laminar flow.]
Gasoline flows steadily downward through the pipe shown in the figure below. Viscous effects are negligible, and the pressure gage indicates the pressure is zero at point (1). Determine (a) the flowrate and (b) the pressure at point (2). (a) Q = (b) p2 = 2.1ft 3.1ft •(1) ↓² -0.12 ft -0.1 ft -free jet ft³/s lb/ft²
SHOW SOlution Ans. F= 733.16kN 1.844m from the bottom of the tank parallel to the gate
A Pump The oil tanks have a diameter of D = 12m. The initial depth of the oil in tank A is 20m, and in tank B the depth is 1 m. The pump delivers a constant head of 60 m. The connecting pipe has a diameter of b = 0.2m, and the head loss due to friction in the pipe is hyL = 8- Find the time required to fill tank B to 14m depth. (neglect minor losses)
سنب Fluid mechanics
5-64. A thin rubber tube of 25 mm inside diameter is used to siphon water from the large tank of Figure 5.56. To prevent the tube from collapsing, the pressure inside the tube can not be less than 50% of the pressure outside the tube. Determine the smallest value of h to prevent the siphon from stopping due to collapsing of the tube. 2.5 m 5 m Figure 5.56 System for Exercise 5-64. THANK SUNTETICE Full Michifo Nas s itset SCH
A suspended gate that’s able to pivot from the top seperates two liquids. There is a stopper that prevents the gate opening anti-clockwise. The gate has a height of 0.5m. The liquid on the right is three times as dense as the liquid on the left. The liquid on the left has a depth of 0.3m. 1) What is the minimum depth of liquid on the right for the gate to open. 2) Comment on the ability to solve this question if the liquid on the left was 0.5m (filled to the top)
Q-Water flows through a pipe having an inner radius of 10 mm at the rate of 36 kg/hr at 25° C. The viscosity of water at 25°C is 0.001 kg/m.s. The Reynolds number of the flow is