Water 3 m 10 cm 80 m

Q: Water at 20°C is flowing through a horizontal nozzle at a flow rate of 0.005 m3/s. At the nozzle…

A:

Q: Water is to be withdrawn from an 11.2-m-high water reservoir by drilling a 4.1-cm-diameter hole at…

A:

Q: A mechanical device pumps the fluid from a depth of 150 m under steady conditions. The density of…

A: Given data  depth=150m  density of fluid=1020 kg/m2  efficiency =70%  velocity of fluid =150m/s…

Q: Liquid ethanol (density is 815 kg/m^3) at a pressure of 235 kPa enters a 12-cm-diameter pipe at a…

A:

Q: Consider incompressible, frictionless flow of water in a vertical pipe of constant diameter. The…

A:

Q: Water is flowing into a factory in a horizontal pipe with a radius of 0.0223 m at ground level. This…

A:

Q: A pressurized tank of water has a 10-cm diameter orifice at the side bottom corner of the tank,…

A: Let us consider that the free surface of water as point 1 and the exit of the orifice to the…

Q: In a water pipe, water flows at a constant rate of 22 L/s whose diameter is constant at 4 cm. The…

A: Given: Flow rate (Q)=22L/s or 22×10-3m3/sPressure drop ∆P=2kPaDiameter of the valve (D)=4cm…

Q: A 3-m-high large tank is initially filled with water. The tank water surface is open to the…

A: Given:Initial height of the tank, H=3 mOrifice diameter, d=10 cm=0.1 mLength of the horizontal pipe,…

Q: In a hydroelectric power plant as shown in the figure, 100 m3/s of water flows froman elevation of…

A: Given Volumetric flow = 100 m3/s Elevation = 130 m Overall efficiency = 0.8 % To find Electric power…

Q: Oil (SG = 0.83) flows at a rate of 200 L/s through a 500m pipe with a diameter of 200mm. The…

A:

Q: Water enters a hydraulic turbine through a 30-cm-diameter pipe at a rate of 0.7 m3/s and exits…

A: The given data is shown in the following attached image:

Q: In a hydroelectric power plant, water flows from an elevation difference of 400 ft to a turbine…

A:

Q: Consider incompressible, frictionless flow of a fluid in a horizontal piping. The pressure and…

A: Given,  P1 = 150 kPa v1 = 1.25 m/s P2 = 140 kPa Density = 700kg/m3 v2 = ? By applying Bernoulli's…

Q: When water is pumped into a water tank 20 m above a lake with a flow rate of 70 l/s, 20.4kW of…

A: Given data:- Head(H) = 20 m Discharge(Q) = 70 L/sec Electric power = 20.4 k

Q: In a pumping system handling water, the level in the suction tank is 3.2m below the pump shaft…

A:

Q: Water is being pumped from a large lake to a reservoir 25 m above at a rate of 25 L/s by a 17-KW…

A: According to the given data V˙=25L/s=25x10-3m3/s Wshaft=17 kW z2-z1=25m hL=5m We need to find…

Q: Water enters a hydraulic turbine through a 35-cm-diameter pipe at a rate of 0.8 m3/s and exits…

A: Bernoulli's equation relates the pressure energy, kinetic energy and potential energy of a fluid…

Q: Water flows at a rate of 20.n L/s through a horizontal pipe whose diameter is constant at 3 cm. The…

A: Given Data The change in pressure is: ∆P=2 kPa=2×103 Pa The density of the water is: ρ=1000 kg/m3…

Q: A 2-kW pump is used to pump kerosene (p = 0.820 kg/L) from a tank on the ground to a tank at a…

A: Given,Power P = 2 KW = 2000 WDensity of kerosene = (rho = 0.820 kg / L)Elevation differences between…

Q: A boy has a tank with a rectangular bottom base 40 cm by 50 cm and a height of 100 cm. The tank is…

A: Given: V=40 cm × 50 cm×100 cma = 3 mm=0.3 cmQin=0.05 L/s = 50 cm3/s To find: Depth of water in the…

Q: Air is flowing through a venturi meter whose diameter is 2.6 in at the entrance part (location 1)…

A:

Q: In a pumping system handling water, the surface level of water in the open suction tank is 3m below…

A: The suction level below the pump center is hs=3 m. The delivery level above the pump center is hd=21…

Q: Electric power is to be generated by installing a hydraulic turbine-generator at a site 120 m below…

A: Hydraulic Head  of Turbine, H=120mWater flow rate, m˙=930 kg/sMechanical power output,PM=850…

Q: The owners of a smallholding water their vegetable garden using collected rainwater from atank.…

A: Diameter of Tank, b=8 m Diameter of hose, c=7m Height of Tank, a=9 m Height of stand, 6m Length of…

Q: diameter tube at a rate of 0.6 m3/s and leaves through a 25 cm diameter tube. cm in diameter With a…

A:

Q: Water flows in a 15-cm-diameter pipe at a velocity of 1.8 m/s. If the head loss along the pipe is…

A: The diameter of the pipe, D=15 cm The velocity of the water V=1.8 m/s The density of the water,…

Q: The water needs of a small farm are to be met by pumping water from a well that can supply water…

A: Given Data The flow rate of the water is:Q=5 L/min The water level in the well is:hw=13m The…

Q: Water, an incompressible fluid, is flowing in a horizontal pipe at a velocity of varg = 1.15 m/s.…

A:

Q: Water is flowing through a venturi meter whose diameter is 7 cm at the entrance part and 4 cm at the…

A:

Q: In a pumping system handling water, the surface level of water in the open suction tank is 3m below…

A: Inlet conditions, diameter of pipe=d1= 7.62 cm =0.0762 m discharge =Q= 0.0126 m3/s friction factor =…

Q: The tank below is cylindrical and has a vertical axis. Its horizontal cross-sectional area is 10 m2.…

A: Given : The horizontal area of cross section of tank = 10 m2 The specific gravity of gasoline = 0.72…

Q: Oil flows in a 39-cm-diameter pipeline at an average velocity of 0.5 m/s. A 304-m-long section of…

A:

Q: 1. The water in an 8-m-diameter, 3-m-high above-ground swimming pool is to be emptied by unplugging…

A:

Q: A pressurized tank of water has a 10-cm-diameter orifice at the bottom, where water discharges to…

A: In order to proceed with the given problem, the following assumptions need to be taken into…

Q: Water is being pumped from a large lake to a reservoir 25 m above at a rate of 25 L/s by a 10-kW…

A: Given:Elevation difference between the lake and the reservoir, ∆z=25 mWater flow rate, Q=25…

Q: A pumped storage power plant with a head of 150 m, with a flow rate of 6 cms for power generation…

A: Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Fluid Dynamics

The study of the flow of gases and liquids, usually in and around solid surfaces, is known as fluid dynamics in physics and engineering. Fluid dynamics, for example, can be used to evaluate the movement of air through an airplane wing or the surface of a vehicle. It can also be used in ship design to increase the speed at which ships pass through water.